jnxpwTDMRate
JUNIPER-PW-TDM-MIB ·
.1.3.6.1.4.1.2636.3.54.1.1.1.1.1
Object
column
SNMPv2-SMIInteger32
The parameter represents the bit-rate of the TDM service
in multiples of the 'basic' 64 Kbit/s rate [TDMCP-EXT].
It complements the definition of pwType used in
PW-STD-MIB.
For structure-agnostic the following should be used:
a) Satop E1 - 32
b) Satop T1 emulation:
i) MUST be set to 24 in the basic emulation mode
ii) MUST be set to 25 for the 'Octet-aligned T1'
emulation mode
c) Satop E3 - 535
d) Satop T3 - 699
For all kinds of structure-aware emulation, this parameter
MUST be set to N where N is the number of DS0 channels
in the corresponding attachment circuit.
Context
- MIB
- JUNIPER-PW-TDM-MIB
- OID
.1.3.6.1.4.1.2636.3.54.1.1.1.1.1- Type
- column
- Access
- readonly
- Status
- current
- Parent
- jnxpwTDMEntry
- Table
- jnxpwTDMTable
- Siblings
- 8
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxpwTDMLastEsTimeStamp The value of sysUpTime at the most recent occasion at
which the TDM PW entered the ES or SES state. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.2636.3.54.1.1.1.1.11 |
| jnxpwTDMIfIndex This is a unique index within the ifTable. It represents
the interface index of the full link or the interface
index for the bundle holding the group of
time slots to be transmitt… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.2636.3.54.1.1.1.1.2 |
| jnxpwGenTDMCfgIndex Index to the generic parameters in the TDM configuration
table that appears in this MIB module. It is likely that
multiple TDM PWs of the same characteristic will share
a single T… | column | JnxPwCfgIndexOrzero | .1.3.6.1.4.1.2636.3.54.1.1.1.1.3 |
| jnxpwRelTDMCfgIndex Index to the relevant TDM configuration table entry
that appears in one of the related MIB modules
such as TDMoIP or CESoPSN. It is likely that
multiple TDM PWs of the same charac… | column | JnxPwCfgIndexOrzero | .1.3.6.1.4.1.2636.3.54.1.1.1.1.4 |
| jnxpwTDMConfigError Any of the bits are set if the local configuration is
not compatible with the peer configuration as available
from the various parameters options. Setting is done based
on signali… | column | Bits | .1.3.6.1.4.1.2636.3.54.1.1.1.1.5 |
| jnxpwTDMTimeElapsed The number of seconds, including partial seconds,
that have elapsed since the beginning of the current
measurement period. If, for some reason, such as an
adjustment in the system… | column | Integer32 | .1.3.6.1.4.1.2636.3.54.1.1.1.1.6 |
| jnxpwTDMValidIntervals The number of previous 15-minute intervals for which data
was collected.
An agent with TDM capability must be capable of supporting
at least n intervals. The minimum value of n is… | column | Integer32 | .1.3.6.1.4.1.2636.3.54.1.1.1.1.7 |
| jnxpwTDMValidDayIntervals The number of previous days for which data
was collected.
An agent with TDM capability must be capable of supporting
at least n intervals. The minimum value of n is 1, The
default… | column | Integer32 | .1.3.6.1.4.1.2636.3.54.1.1.1.1.8 |