ipadPktSwCfgCIREE
IPADv2-MIB ·
.1.3.6.1.4.1.321.100.1.10.2.1.11
Object
column
r/w
Enumeration
Determines if the interface will enforce CIR and excess burst configured values.
Context
- MIB
- IPADv2-MIB
- OID
.1.3.6.1.4.1.321.100.1.10.2.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ipadPktSwCfgTableEntry
- Table
- ipadPktSwCfgTable
- Siblings
- 20
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | other |
2 | no |
3 | yes |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ipadPktSwCfgService The index into the packet switch configuration table;
an entry in the ipad Service table. | column | Integer32 | .1.3.6.1.4.1.321.100.1.10.2.1.1 |
| ipadPktSwCfgDefExBurst Default excess burst rate in bits per second. | column | Integer32 | .1.3.6.1.4.1.321.100.1.10.2.1.10 |
| ipadPktSwCfgLinkInjection Indicates how to process frames in excess
of the CIR when congestion exists. | column | Enumeration | .1.3.6.1.4.1.321.100.1.10.2.1.12 |
| ipadPktSwCfgAutoDiagnostic Determines if the unit will put itself into
diagnostic mode everytime it determines that
there are no LMI received on a network service. | column | Enumeration | .1.3.6.1.4.1.321.100.1.10.2.1.13 |
| ipadPktSwCfgAutoDiscovery Determines if the unit will learn the DLCIs
from the LMMI received on this service. | column | Enumeration | .1.3.6.1.4.1.321.100.1.10.2.1.14 |
| ipadPktSwCfgMgmtDLCI Specifies the DLCI that will be used by the unit
for management information. Specifying a 0 disables
this feature. | column | Integer32 | .1.3.6.1.4.1.321.100.1.10.2.1.15 |
| ipadPktSwCfgRoundTripDelaySize Specifies the packet size in octets used to calculate
round trip delay. | column | Integer32 | .1.3.6.1.4.1.321.100.1.10.2.1.16 |
| ipadPktSwCfgRoundTripDelayRate Specifies the packet rate in seconds used to calculate
round trip delay. | column | Integer32 | .1.3.6.1.4.1.321.100.1.10.2.1.17 |
| ipadPktSwCfgAutoIPMgmtAddr Look for DLCI (980-995) and uses its IP address. | column | Enumeration | .1.3.6.1.4.1.321.100.1.10.2.1.18 |
| ipadPktSwCfgNormalTxQueueSize The depth of the normal priority tx queue. This size determines the
max number of low priority packets that can be queued in front of high
priority traffic. | column | Integer32 | .1.3.6.1.4.1.321.100.1.10.2.1.19 |
| ipadPktSwCfgInterfaceType Network ports should be set to User Network Interface (uni)
and user ports should be set to Network Interface (ni). | column | Enumeration | .1.3.6.1.4.1.321.100.1.10.2.1.2 |
| ipadPktSwCfgAddDLCI Identifies a DLCI number to be added. | column | Integer32 | .1.3.6.1.4.1.321.100.1.10.2.1.20 |
| ipadPktSwCfgDeleteDLCI Identifies a DLCI number to be deleted. | column | Integer32 | .1.3.6.1.4.1.321.100.1.10.2.1.21 |
| ipadPktSwCfgLnkMgmtType If set to auto, the frame relay LMI type will
be learned from the network side. If set to
none, all DLCI must be configured. | column | Enumeration | .1.3.6.1.4.1.321.100.1.10.2.1.3 |
| ipadPktSwCfgMaxFrameSize This is the maximum frame size configured in the frame relay network. | column | Integer32 | .1.3.6.1.4.1.321.100.1.10.2.1.4 |
| ipadPktSwCfgnN1 Number of keep alive requests between full status request. | column | Integer32 | .1.3.6.1.4.1.321.100.1.10.2.1.5 |
| ipadPktSwCfgnN2 Number of errors from FRAD before alarm. | column | Integer32 | .1.3.6.1.4.1.321.100.1.10.2.1.6 |
| ipadPktSwCfgnN3 Number of events to sample nN2. | column | Integer32 | .1.3.6.1.4.1.321.100.1.10.2.1.7 |
| ipadPktSwCfgnT1 Delay before issuing a poll sequence. | column | Integer32 | .1.3.6.1.4.1.321.100.1.10.2.1.8 |
| ipadPktSwCfgDefCIR Default committed information rate in bits per second. | column | Integer32 | .1.3.6.1.4.1.321.100.1.10.2.1.9 |