ipadHDLCConfigRxLowUtil
IPADv2-MIB ·
.1.3.6.1.4.1.321.100.1.22.1.1.10
Object
column
r/w
Integer32
What the user considers an end-of-day low Rx HDLC utilization for this entry. Utilization is expressed as a percentage. When the utilization is set to zero the Rx low utilization alarm is disabled.
Context
- MIB
- IPADv2-MIB
- OID
.1.3.6.1.4.1.321.100.1.22.1.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ipadHDLCConfigTableEntry
- Table
- ipadHDLCConfigTable
- Siblings
- 18
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ipadHDLCConfigIndex Index into the HDLC Utilization Monitor Config table. | column | Integer32 | .1.3.6.1.4.1.321.100.1.22.1.1.1 |
| ipadHDLCConfigRxLowUtilAlarm Indicates if the Rx low utilization alarm is declared. | column | Enumeration | .1.3.6.1.4.1.321.100.1.22.1.1.11 |
| ipadHDLCConfigTxHighUtil What the user considers a high Tx HDLC utilization for this entry.
Utilization is expressed as a percentage. | column | Integer32 | .1.3.6.1.4.1.321.100.1.22.1.1.12 |
| ipadHDLCConfigTxHighUtilThreshold Number of seconds a Tx high utilization condition must be
present within 15 minutes before an alarm condition is
declared. | column | Integer32 | .1.3.6.1.4.1.321.100.1.22.1.1.13 |
| ipadHDLCConfigTxHighUtilStatus Indicates if a Tx high utilization condition exists. | column | Enumeration | .1.3.6.1.4.1.321.100.1.22.1.1.14 |
| ipadHDLCConfigTxHighUtilCount The number of seconds in the past 15 minutes that have
been greater than or equal to the Tx high utilization parameter.
The value is calculated from a sliding window of
15 one-min… | column | Integer32 | .1.3.6.1.4.1.321.100.1.22.1.1.15 |
| ipadHDLCConfigTxHighUtilAlarm Indicates if the Tx high utilization alarm threshold is exceeded. | column | Enumeration | .1.3.6.1.4.1.321.100.1.22.1.1.16 |
| ipadHDLCConfigTxLowUtil What the user considers an end-of-day low Tx HDLC utilization
for this entry. Utilization is expressed as a percentage.
When the utilization is set to zero the Tx low utilization… | column | Integer32 | .1.3.6.1.4.1.321.100.1.22.1.1.17 |
| ipadHDLCConfigTxLowUtilAlarm Indicates if the Tx low utilization alarm is declared. | column | Enumeration | .1.3.6.1.4.1.321.100.1.22.1.1.18 |
| ipadHDLCConfigReset The set values perform the following actions:
clearAlarms(2) - Clears any active HDLC utilization alarms and counts
clearHistory(3) - Clears HDLC utilization history tables. | column | Enumeration | .1.3.6.1.4.1.321.100.1.22.1.1.19 |
| ipadHDLCConfigService Service the HDLC utilization monitor is attached.
0 = Disabled. | column | Integer32 | .1.3.6.1.4.1.321.100.1.22.1.1.2 |
| ipadHDLCConfigServiceBPS Service bit rate. | column | Integer32 | .1.3.6.1.4.1.321.100.1.22.1.1.3 |
| ipadHDLCConfigResetTimer Number of contiguous seconds a utilization alarm must not
be present before the alarm condition is automatically reset. | column | Integer32 | .1.3.6.1.4.1.321.100.1.22.1.1.4 |
| ipadHDLCConfigRxHighUtil What the user considers a high Rx HDLC utilization for this entry.
Utilization is expressed as a percentage. | column | Integer32 | .1.3.6.1.4.1.321.100.1.22.1.1.5 |
| ipadHDLCConfigRxHighUtilThreshold Number of seconds a Rx high utilization condition must be
present within 15 minutes before an alarm condition is
declared. | column | Integer32 | .1.3.6.1.4.1.321.100.1.22.1.1.6 |
| ipadHDLCConfigRxHighUtilStatus Indicates if a Rx high utilization condition exists. | column | Enumeration | .1.3.6.1.4.1.321.100.1.22.1.1.7 |
| ipadHDLCConfigRxHighUtilCount The number of seconds in the past 15 minutes that have
been greater than or equal to the Rx high utilization parameter.
The value is calculated from a sliding window of
15 one-min… | column | Integer32 | .1.3.6.1.4.1.321.100.1.22.1.1.8 |
| ipadHDLCConfigRxHighUtilAlarm Indicates if the Rx high utilization alarm threshold is exceeded. | column | Enumeration | .1.3.6.1.4.1.321.100.1.22.1.1.9 |