oduiktClientCtpTcmIdentifier

INFINERA-TP-ODUKTICTP-MIB · .1.3.6.1.4.1.21296.2.2.2.2.35.1.1.1
MIB view Table view

Object

column Integer32 
The TCM field identifier for this Tandem Connection Monitoring point. 
This TCM identifier is used along with the Side identifier to explicitly formulate the AID of the 
ODUikT Client CTP. 
Note that out of the 6 values, a maximum of 3 can be active at any given time, each with one or both 
sides (facility and/or terminal) active (e.g., there can be up to 12 ODUikT CTP object instances, but 
only for 3 TCM IDs).

Context

MIB
INFINERA-TP-ODUKTICTP-MIB
OID
.1.3.6.1.4.1.21296.2.2.2.2.35.1.1.1
Type
column
Access
readonly
Status
current
Parent
oduiktClientCtpEntry
Table
oduiktClientCtpTable
Siblings
25

Syntax

Integer32

Values & Constraints

Object Constraints
range: 1-12

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
oduiktClientCtpExpectedDAPI
The Destination Access Point Identifier that is expected in the Trib to Line direction.
columnOctetString.1.3.6.1.4.1.21296.2.2.2.2.35.1.1.10
oduiktClientCtpTimDetMode
This attribute is used to configure if the TIM-S alarm shall be reported on mismatch of Expected and Received TTI message. The following are the values and their meaning: OFF:…
columnEnumeration.1.3.6.1.4.1.21296.2.2.2.2.35.1.1.11
oduiktClientCtpReceivedTTI
The TTI message received from the side indicated by the AID of the ODUikT CTP.
columnOctetString.1.3.6.1.4.1.21296.2.2.2.2.35.1.1.12
oduiktClientCtpPmHistStatsEnable
Flag to enable or disable the collection of PMs on the side indicated by the AID of the ODUikT CTP.
columnEnumeration.1.3.6.1.4.1.21296.2.2.2.2.35.1.1.13
oduiktClientCtpRxEb15MinutesTce
Number of Error Block in received direction during 15 minutes interval.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.35.1.1.14
oduiktClientCtpRxEbDayTce
Number of Error Block in received direction during 24 hours interval.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.35.1.1.15
oduiktClientCtpRxDs15MinutesTce
Number of Defect Seconds in received direction during 15 minutes interval.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.35.1.1.16
oduiktClientCtpRxDsDayTce
Number of Defect Seconds in receive direction during 24 hours interval.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.35.1.1.17
oduiktClientCtpRxEbDayTceReporting
Flag that enables/disables the reporting of RxEbDayTce threshold crossing.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.35.1.1.18
oduiktClientCtpRxEb15MinutesTceReporting
Flag that enables/disables the reporting of RxEb15MinutesTce threshold crossing.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.35.1.1.19
oduiktClientCtpSide
TThe TCM Side identifier for this Tandem Connection Monitoring point. This TCM Side identifier is used along with the TCM identifier to explicitly formulate the AID of the ODUik…
columnEnumeration.1.3.6.1.4.1.21296.2.2.2.2.35.1.1.2
oduiktClientCtpRxDsDayTceReporting
Flag that enables/disables the reporting of RxDsDayTce threshold crossing.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.35.1.1.20
oduiktClientCtpRxDs15MinutesTceReporting
Flag that enables/disables the reporting of RxDs15MinutesTce threshold crossing.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.35.1.1.21
oduiktClientCtpSDThreshold
This attribute indicates the threshold level for declaring a Degraded Signal defect. A Degraded Signal defect shall be declared if SDThreshold consecutive bad PM Seconds are det…
columnInteger32.1.3.6.1.4.1.21296.2.2.2.2.35.1.1.22
oduiktClientCtpRxBei15MinutesTce
This attribute indicates the threshold level for Received BEI counts for 15Min-interval
columnSNMPv2-SMICounter64.1.3.6.1.4.1.21296.2.2.2.2.35.1.1.23
oduiktClientCtpRxBeiDayTce
This attribute indicates the threshold level for Received BEI counts for day-interval
columnSNMPv2-SMICounter64.1.3.6.1.4.1.21296.2.2.2.2.35.1.1.24
oduiktClientCtpRxBei15MinutesTceReporting
Flag that enables/disables the reporting of RxBei15MinutesTce threshold crossing.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.35.1.1.25
oduiktClientCtpRxBeiDayTceReporting
Flag that enables/disables the reporting of RxBeiDay Tce threshold crossing.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.35.1.1.26
oduiktClientCtpConfiguredServiceType
The ODU Service type that is configured on this generic OduClientCtp managed object.
columnINFINERA-TC-MIBInfnServiceType.1.3.6.1.4.1.21296.2.2.2.2.35.1.1.3
oduiktClientCtpAlarmReportControl
The Alarm Reporting Control Flag for the ODUikT Clients.
columnINFINERA-TC-MIBInfnArc.1.3.6.1.4.1.21296.2.2.2.2.35.1.1.4
oduiktClientCtpSupportingCircuitIdList
The Supporting Circuit ID List that is this client is using.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.21296.2.2.2.2.35.1.1.5
oduiktClientCtpMonitoringMode
Allowed Section Monitoring / Path Monitoring / TCM Attribute Value(s) (For side corresponding to MonitoringMode) (Fac-Side/Term-Side).
columnINFINERA-TC-MIBInfnMonitoringMode.1.3.6.1.4.1.21296.2.2.2.2.35.1.1.6
oduiktClientCtpDSThreshold
This attribute indicates the threshold level for declaring a performance monitoring (PM) Second to be bad. A PM Second is declared bad if the percentage of detected error blocks i…
columnInteger32.1.3.6.1.4.1.21296.2.2.2.2.35.1.1.7
oduiktClientCtpTxTTI
The TTI message that needs to be transmitted from Trib to Line direction. This message is inserted only when the TribInsertTTI field is set to Enabled.
columnOctetString.1.3.6.1.4.1.21296.2.2.2.2.35.1.1.8
oduiktClientCtpExpectedSAPI
The Source Access Point Identifier that is expected in the Trib to Line direction.
columnOctetString.1.3.6.1.4.1.21296.2.2.2.2.35.1.1.9