INFINERA-TP-ODUKTICTP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
26

oduiktClientCtpTable

table
.1.3.6.1.4.1.21296.2.2.2.2.35.1 · 1 row entry · 26 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk oduiktClientCtpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'INFINERA-TP-ODUKTICTP-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'INFINERA-TP-ODUKTICTP-MIB::oduiktClientCtpTable' 
A list of OduiktClientCtp entries. Each entry is uniquely identified by the value of ifIndex.
oduiktClientCtpEntry row .1.3.6.1.4.1.21296.2.2.2.2.35.1.1
A OduiktClientCtp entry containing information pertaining to Infinera OduiktClientCtp interfaces.
Entries will exist in this table for interfaces of type oduiktclientCtp.
Indexes
Column Syntax OID
oduiktClientCtpTcmIdentifier
The TCM field identifier for this Tandem Connection Monitoring point.
This TCM identifier is used along with the Side identifier to explicitly formulate the AID of the
ODUikT Client CTP.
Note that out of the 6 values…
Integer32
Constraints:
range: 1-12
 .1.3.6.1.4.1.21296.2.2.2.2.35.1.1.1
oduiktClientCtpSide
TThe TCM Side identifier for this Tandem Connection Monitoring point.
This TCM Side identifier is used along with the TCM identifier to explicitly formulate the AID of the
ODUikT Client CTP. For ODUk-based adaptation,…
Enumeration
Enumerated Values:
1fac
2term
 .1.3.6.1.4.1.21296.2.2.2.2.35.1.1.2
oduiktClientCtpConfiguredServiceType
The ODU Service type that is configured on this generic OduClientCtp managed object.
INFINERA-TC-MIBInfnServiceType
Type Values:
1notSet
2bw10g
3bw2d5g
4oc48
5oc192
6bwtdm155
7bwtdm622
8stm16
9stm64
10ficon
11escon
12bw10Gbe
13oc3
14oc12
15stm1
16stm4
17bw10Gcc
18bw1Gbe
19bw2d5Gcc
20bw2d38Gcc
21bw1G
22bw2x1GbeChan
23bw40g
24stm256
25stm256L1
26stm256L2
27stm256L3
28stm256L4
29oc768
30oc768L1
31oc768L2
32oc768L3
33oc768L4
34bw4xoc192
35bw4xstm64
36bw10Gdtf
37bw1Gfc
38bw2Gfc
39bw4Gfc
40bw4Gcc
41bw8Gfc
42bw10Gfc
43otu1
44otu2
45otu1e
46otu2e
47odu1
48odu1e
49odu2
50odu2e
51dv6000
52escon200Mcc
53ib2d5Gcc
54ib10Gcc
55hd1d485Gcc
56hd1d483Gcc
57sd270Mcc
58dvb270Mcc
59hdSdi3GPal
60hdSdi3GNtsc
61bw4Gig
62bw8Gig
63bw1d25g
64otu2f
65odu2f
66bwVideo270
67bw4GFc1
68bw4GFc2
69bw1d25Gcc
70bw40Gbe
71bw100Gbe
72bw10d3Gcc
73bw100g
74bw40gbellane
75bw100gbellane
76bwOdui0
77bwOdui1
78bwOdui2
79bwOdui3
80bwOdui4
81bwOdui3plus
82bwOtui0
83bwOtui1
84bwOtui2
85bwOtui3
86bwOtui4
87bwOtui3plus
88bwOtu4
89bwOtu3
90bwOdu4
91bwOdu3
92bwOtu3e1
93bwOtu3e2
94bwOdu3e1
95bwOdu3e2
96bwOdu0
97bwOduFlex
98bwOduFlexI
99bwGfp
100bw11G1Cc
101bwOtu2v
102bwCcFlex
103bw1G0625Cc
104bw2G125Cc
105bwOc768demux
106bwStm256demux
107bwTransparent
108bw40gedemux
109bw100gedemux
110bwOdu1dtn
111bWOdu2dtn
112bWOdu1edtn
113bWOdu2edtn
114bW10X10gdemux
115bwOdu2i4v
116bwOdu2i10v
117bw10gbe
118bw100gbe
119bwOtuAdapti
120bwOduAdapti
Description:
The infinera supported payloads.
 .1.3.6.1.4.1.21296.2.2.2.2.35.1.1.3
oduiktClientCtpAlarmReportControl
The Alarm Reporting Control Flag for the ODUikT Clients.
INFINERA-TC-MIBInfnArcr/w
Type Values:
1allowed
2inhibited
Description:
This textual convention represents the alarm reporting control state of the manged objects.
 .1.3.6.1.4.1.21296.2.2.2.2.35.1.1.4
oduiktClientCtpSupportingCircuitIdList
The Supporting Circuit ID List that is this client is using.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.21296.2.2.2.2.35.1.1.5
oduiktClientCtpMonitoringMode
Allowed Section Monitoring / Path Monitoring / TCM Attribute Value(s)
(For side corresponding to MonitoringMode) (Fac-Side/Term-Side).
INFINERA-TC-MIBInfnMonitoringModer/w
Type Values:
1unused
2nim
3lim
4im
 .1.3.6.1.4.1.21296.2.2.2.2.35.1.1.6
oduiktClientCtpDSThreshold
This attribute indicates the threshold level for declaring a performance monitoring (PM) Second to be bad.
A PM Second is declared bad if the percentage of detected error blocks in that second is greater than or equal t…
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.21296.2.2.2.2.35.1.1.7
oduiktClientCtpTxTTI
The TTI message that needs to be transmitted from Trib to Line direction.
This message is inserted only when the TribInsertTTI field is set to Enabled.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.21296.2.2.2.2.35.1.1.8
oduiktClientCtpExpectedSAPI
The Source Access Point Identifier that is expected in the Trib to Line direction.
OctetStringr/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.21296.2.2.2.2.35.1.1.9
oduiktClientCtpExpectedDAPI
The Destination Access Point Identifier that is expected in the Trib to Line direction.
OctetStringr/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.21296.2.2.2.2.35.1.1.10
oduiktClientCtpTimDetMode
This attribute is used to configure if the TIM-S alarm shall be reported on mismatch of Expected and Received TTI message.
The following are the values and their meaning:
OFF: TIM-S is not reported.
DAPI: TIM-S …
Enumerationr/w
Enumerated Values:
1off
2sapi
3dapi
4sapidapi
 .1.3.6.1.4.1.21296.2.2.2.2.35.1.1.11
oduiktClientCtpReceivedTTI
The TTI message received from the side indicated by the AID of the ODUikT CTP.
OctetString
Constraints:
range: 1-64
 .1.3.6.1.4.1.21296.2.2.2.2.35.1.1.12
oduiktClientCtpPmHistStatsEnable
Flag to enable or disable the collection of PMs on the side indicated by the AID of the ODUikT CTP.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.21296.2.2.2.2.35.1.1.13
oduiktClientCtpRxEb15MinutesTce
Number of Error Block in received direction during 15 minutes interval.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.21296.2.2.2.2.35.1.1.14
oduiktClientCtpRxEbDayTce
Number of Error Block in received direction during 24 hours interval.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.21296.2.2.2.2.35.1.1.15
oduiktClientCtpRxDs15MinutesTce
Number of Defect Seconds in received direction during 15 minutes interval.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.21296.2.2.2.2.35.1.1.16
oduiktClientCtpRxDsDayTce
Number of Defect Seconds in receive direction during 24 hours interval.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.21296.2.2.2.2.35.1.1.17
oduiktClientCtpRxEbDayTceReporting
Flag that enables/disables the reporting of RxEbDayTce threshold crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.21296.2.2.2.2.35.1.1.18
oduiktClientCtpRxEb15MinutesTceReporting
Flag that enables/disables the reporting of RxEb15MinutesTce threshold crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.21296.2.2.2.2.35.1.1.19
oduiktClientCtpRxDsDayTceReporting
Flag that enables/disables the reporting of RxDsDayTce threshold crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.21296.2.2.2.2.35.1.1.20
oduiktClientCtpRxDs15MinutesTceReporting
Flag that enables/disables the reporting of RxDs15MinutesTce threshold crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.21296.2.2.2.2.35.1.1.21
oduiktClientCtpSDThreshold
This attribute indicates the threshold level for declaring a Degraded Signal defect.
A Degraded Signal defect shall be declared if SDThreshold consecutive bad PM Seconds are detected.
This attributes maps to the DEGM …
Integer32r/w
Constraints:
range: 2-10
 .1.3.6.1.4.1.21296.2.2.2.2.35.1.1.22
oduiktClientCtpRxBei15MinutesTce
This attribute indicates the threshold level for Received BEI counts for 15Min-interval
SNMPv2-SMICounter64r/w
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.21296.2.2.2.2.35.1.1.23
oduiktClientCtpRxBeiDayTce
This attribute indicates the threshold level for Received BEI counts for day-interval
SNMPv2-SMICounter64r/w
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.21296.2.2.2.2.35.1.1.24
oduiktClientCtpRxBei15MinutesTceReporting
Flag that enables/disables the reporting of RxBei15MinutesTce threshold crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.21296.2.2.2.2.35.1.1.25
oduiktClientCtpRxBeiDayTceReporting
Flag that enables/disables the reporting of RxBeiDay Tce threshold crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.21296.2.2.2.2.35.1.1.26