channelCtpExpectedDtsTti

INFINERA-TP-CHANNELCTP-MIB · .1.3.6.1.4.1.21296.2.2.2.2.4.1.1.7
MIB view Table view

Object

column r/w SNMPv2-TCDisplayString 
The Expected DTS TTI. If this is not equal to the zero-length string and it doesn't match
the recived TTI, an alarm will be raised.

Context

MIB
INFINERA-TP-CHANNELCTP-MIB
OID
.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.7
Type
column
Access
readwrite
Status
current
Parent
channelCtpEntry
Table
channelCtpTable
Siblings
23

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
channelCtpPreFecThresholdOrder
Pre-FEC BER threshold exponent.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.1
channelCtpDtsEs15MinutesTce
Count of the number of seconds during which (at any point during the second) at least one DTF Path layer BIP error was detected or an AISP, DTPLOF or POST FEC SF BER defect was pr…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.10
channelCtpDtsSes15MinutesTce
Count of the seconds during which K (= 2,400 as specified in GR-253-CORE Issue 3 specification) or more DTF Path layer BIP errors were detected or an AIS-P, DTPLOF or POST FEC SF …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.11
channelCtpDtsCvDayTce
Count of BIP errors detected at the DTF Path layer. Up to 8 path BIP errors can be detected per frame, with each error incrementing the DTFDLM-CV-S current register.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.12
channelCtpDtsEsDayTce
Count of the number of seconds during which (at any point during the second) at least one DTF Path layer BIP error was detected or an AIS-P, DTPLOF or POST FEC SF BER defect was p…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.13
channelCtpDtsSesDayTce
Count of the seconds during which K (= 2,400 as specified in GR-253-CORE Issue 3 specification) or more DTF Path layer BIP errors were detected or an AIS-P, DTP-LOF or POST FEC SF…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.14
channelCtpDtsCv15MinutesTceReporting
Flag that enables the reporting of DtsCv15MinutesTce crossing.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.15
channelCtpDtsEs15MinutesTceReporting
Flag that enables the reporting of DtsEs15MinutesTce crossing.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.16
channelCtpDtsSes15MinutesTceReporting
Flag that enables the reporting of DtsSes15MinutesTce crossing.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.17
channelCtpDtsCvDayTceReporting
Flag that enables the reporting of DtsCvDayTce crossing.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.18
channelCtpDtsEsDayTceReporting
Flag that enables the reporting of DtsEsDayTce crossing.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.19
channelCtpPreFecThresholdMantissa
Pre-FEC BER threshold matissa range.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.2
channelCtpDtsSesDayTceReporting
Flag that enables the reporting of DtsSesDayTce crossing.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.20
channelCtpPrbsGenerationMode
When enabled, this object starts generating PRBS data on the transmit side.
columnEnumeration.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.21
channelCtpPrbsMonitoringMode
Flag which enables the monitoring of bit errors.
columnEnumeration.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.22
channelCtpTEEnabled
Controls whether this channel's bandwidth should be advertized/used for SNC creation
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.23
channelCtpPmHistStatsEnable
PmHistStatsEnable
columnEnumeration.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.24
channelCtpSignalDegradeReporting
When enabled and when the channel is in signal degraded state, the Signal Degrade alarm is raised. If the value is disabled, the alarm is not raised (even under SD condition).
columnEnumeration.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.3
channelCtpInsertDtsTti
Flag that enables the TTI string to be entered and monitored at the far end.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.4
channelCtpDtsTtiAlarmReporting
Controls whether DTS Trail Trace Identifier will be transmitted.
columnEnumeration.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.5
channelCtpTxDtsTti
The transmitted Dts trail trace identifier.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.6
channelCtpRxDtsTti
The received Dts trail trace identifier.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.8
channelCtpDtsCv15MinutesTce
Count of BIP errors detected at the DTF Path layer. Up to 8 path BIP errors can be detected per frame, with each error incrementing the DTFDLM- CV-S current register.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.9