INFINERA-TP-CHANNELCTP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

channelCtpTable

table

.1.3.6.1.4.1.21296.2.2.2.2.4.1 · 1 row entry · 24 columns

Open in standard view

Uses the infinera variant from /opt/observium/mibs/infinera.

Command help

Walk channelCtpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'INFINERA-TP-CHANNELCTP-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'INFINERA-TP-CHANNELCTP-MIB::channelCtpTable'

A list of ChannelCtp entries. Each entry is uniquely identified by the value of ifIndex.

channelCtpEntry row .1.3.6.1.4.1.21296.2.2.2.2.4.1.1

A ChannelCtp entry containing information pertaining to Infinera ChannelCtp interfaces.
This table is a subclass of IfCommon.
Entries will exist in this table only for interfaces of type ChannelCtp.
The Channel CTP mode…

Indexes

IF-MIBifIndex

Column Syntax OID

channelCtpPreFecThresholdOrder

Pre-FEC BER threshold exponent.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.1

channelCtpPreFecThresholdMantissa

Pre-FEC BER threshold matissa range.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.2

channelCtpSignalDegradeReporting

When enabled and when the channel is in signal degraded state, the Signal Degrade alarm
is raised. If the value is disabled, the alarm is not raised (even under SD condition).

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.3

channelCtpInsertDtsTti

Flag that enables the TTI string to be entered and monitored at the far end.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.4

channelCtpDtsTtiAlarmReporting

Controls whether DTS Trail Trace Identifier will be transmitted.

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.5

channelCtpTxDtsTti

The transmitted Dts trail trace identifier.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.6

channelCtpExpectedDtsTti

The Expected DTS TTI. If this is not equal to the zero-length string and it doesn't match
the recived TTI, an alarm will be raised.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.7

channelCtpRxDtsTti

The received Dts trail trace identifier.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.8

channelCtpDtsCv15MinutesTce

Count of BIP errors detected at the DTF Path layer. Up to 8 path BIP errors can be detected per frame, with each error incrementing the DTFDLM- CV-S current register.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.9

channelCtpDtsEs15MinutesTce

Count of the number of seconds during which (at any point during the second) at least one DTF Path layer BIP error was detected or an AISP, DTPLOF or POST FEC SF BER defect was present.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.10

channelCtpDtsSes15MinutesTce

Count of the seconds during which K (= 2,400 as specified in GR-253-CORE Issue 3 specification) or more DTF Path layer BIP errors were detected or an AIS-P, DTPLOF or POST FEC SF BER defect was present.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.11

channelCtpDtsCvDayTce

Count of BIP errors detected at the DTF Path layer. Up to 8 path BIP errors can be detected per frame, with each error incrementing the DTFDLM-CV-S current register.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.12

channelCtpDtsEsDayTce

Count of the number of seconds during which (at any point during the second) at least one DTF Path layer BIP error was detected or an AIS-P, DTPLOF or POST FEC SF BER defect was present.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.13

channelCtpDtsSesDayTce

Count of the seconds during which K (= 2,400 as specified in GR-253-CORE Issue 3 specification) or more DTF Path layer BIP errors were detected or an AIS-P, DTP-LOF or POST FEC SF BER defect was present.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.14

channelCtpDtsCv15MinutesTceReporting

Flag that enables the reporting of DtsCv15MinutesTce crossing.

SNMPv2-TCTruthValuer/w

Type Values: