channelCtpDtsCvDayTce
INFINERA-TP-CHANNELCTP-MIB ·
.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.12
Object
Count of BIP errors detected at the DTF Path layer. Up to 8 path BIP errors can be detected per frame, with each error incrementing the DTFDLM-CV-S current register.
Context
- MIB
- INFINERA-TP-CHANNELCTP-MIB
- OID
.1.3.6.1.4.1.21296.2.2.2.2.4.1.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- channelCtpEntry
- Table
- channelCtpTable
- Siblings
- 23
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| channelCtpPreFecThresholdOrder Pre-FEC BER threshold exponent. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.4.1.1.1 |
| channelCtpDtsEs15MinutesTce Count of the number of seconds during which (at any point during the second) at least one DTF Path layer BIP error was detected or an AISP, DTPLOF or POST FEC SF BER defect was pr… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.4.1.1.10 |
| channelCtpDtsSes15MinutesTce Count of the seconds during which K (= 2,400 as specified in GR-253-CORE Issue 3 specification) or more DTF Path layer BIP errors were detected or an AIS-P, DTPLOF or POST FEC SF … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.4.1.1.11 |
| channelCtpDtsEsDayTce Count of the number of seconds during which (at any point during the second) at least one DTF Path layer BIP error was detected or an AIS-P, DTPLOF or POST FEC SF BER defect was p… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.4.1.1.13 |
| channelCtpDtsSesDayTce Count of the seconds during which K (= 2,400 as specified in GR-253-CORE Issue 3 specification) or more DTF Path layer BIP errors were detected or an AIS-P, DTP-LOF or POST FEC SF… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.4.1.1.14 |
| channelCtpDtsCv15MinutesTceReporting Flag that enables the reporting of DtsCv15MinutesTce crossing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.4.1.1.15 |
| channelCtpDtsEs15MinutesTceReporting Flag that enables the reporting of DtsEs15MinutesTce crossing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.4.1.1.16 |
| channelCtpDtsSes15MinutesTceReporting Flag that enables the reporting of DtsSes15MinutesTce crossing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.4.1.1.17 |
| channelCtpDtsCvDayTceReporting Flag that enables the reporting of DtsCvDayTce crossing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.4.1.1.18 |
| channelCtpDtsEsDayTceReporting Flag that enables the reporting of DtsEsDayTce crossing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.4.1.1.19 |
| channelCtpPreFecThresholdMantissa Pre-FEC BER threshold matissa range. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.4.1.1.2 |
| channelCtpDtsSesDayTceReporting Flag that enables the reporting of DtsSesDayTce crossing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.4.1.1.20 |
| channelCtpPrbsGenerationMode When enabled, this object starts generating PRBS data on the transmit side. | column | Enumeration | .1.3.6.1.4.1.21296.2.2.2.2.4.1.1.21 |
| channelCtpPrbsMonitoringMode Flag which enables the monitoring of bit errors. | column | Enumeration | .1.3.6.1.4.1.21296.2.2.2.2.4.1.1.22 |
| channelCtpTEEnabled Controls whether this channel's bandwidth should be advertized/used for SNC creation | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.4.1.1.23 |
| channelCtpPmHistStatsEnable PmHistStatsEnable | column | Enumeration | .1.3.6.1.4.1.21296.2.2.2.2.4.1.1.24 |
| channelCtpSignalDegradeReporting When enabled and when the channel is in signal degraded state, the Signal Degrade alarm
is raised. If the value is disabled, the alarm is not raised (even under SD condition). | column | Enumeration | .1.3.6.1.4.1.21296.2.2.2.2.4.1.1.3 |
| channelCtpInsertDtsTti Flag that enables the TTI string to be entered and monitored at the far end. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.4.1.1.4 |
| channelCtpDtsTtiAlarmReporting Controls whether DTS Trail Trace Identifier will be transmitted. | column | Enumeration | .1.3.6.1.4.1.21296.2.2.2.2.4.1.1.5 |
| channelCtpTxDtsTti The transmitted Dts trail trace identifier. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21296.2.2.2.2.4.1.1.6 |
| channelCtpExpectedDtsTti The Expected DTS TTI. If this is not equal to the zero-length string and it doesn't match
the recived TTI, an alarm will be raised. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21296.2.2.2.2.4.1.1.7 |
| channelCtpRxDtsTti The received Dts trail trace identifier. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21296.2.2.2.2.4.1.1.8 |
| channelCtpDtsCv15MinutesTce Count of BIP errors detected at the DTF Path layer. Up to 8 path BIP errors can be detected per frame, with each error incrementing the DTFDLM- CV-S current register. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.4.1.1.9 |