dot3adAggActorSystemID
IEEE8023-LAG-MIB ·
.1.2.840.10006.300.43.1.1.1.1.4
Object
A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE-From the perspective of the Link Aggregation mechanisms described in Clause 6, only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 6.7).
Context
- MIB
- IEEE8023-LAG-MIB
- OID
.1.2.840.10006.300.43.1.1.1.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- dot3adAggEntry
- Table
- dot3adAggTable
- Siblings
- 10
Values & Constraints
Type Constraints
range: 6
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dot3adAggIndex The unique identifier allocated to this Aggregator by the
local System. This attribute identifies an Aggregator instance
among the subordinate managed objects of the containing ob… | column | IF-MIBInterfaceIndex | .1.2.840.10006.300.43.1.1.1.1.1 |
| dot3adAggPartnerOperKey The current operational value of the Key for the
Aggregator's current protocol Partner. This is a 16-bit
read-only value. If the aggregation is manually configured,
this Key value… | column | LacpKey | .1.2.840.10006.300.43.1.1.1.1.10 |
| dot3adAggCollectorMaxDelay The value of this 16-bit read-write attribute defines
the maximum delay, in tens of microseconds, that
may be imposed by the Frame Collector between
receiving a frame from an Aggr… | column | Integer32 | .1.2.840.10006.300.43.1.1.1.1.11 |
| dot3adAggMACAddress A 6-octet read-only value carrying the individual
MAC address assigned to the Aggregator. | column | SNMPv2-TCMacAddress | .1.2.840.10006.300.43.1.1.1.1.2 |
| dot3adAggActorSystemPriority A 2-octet read-write value indicating the priority value
associated with the Actor's System ID. | column | Integer32 | .1.2.840.10006.300.43.1.1.1.1.3 |
| dot3adAggAggregateOrIndividual A read-only Boolean value indicating whether the
Aggregator represents an Aggregate ('TRUE') or
an Individual link ('FALSE'). | column | SNMPv2-TCTruthValue | .1.2.840.10006.300.43.1.1.1.1.5 |
| dot3adAggActorAdminKey The current administrative value of the Key for the
Aggregator. The administrative Key value may differ from the
operational Key value for the reasons discussed in 6.7.2. This
is … | column | LacpKey | .1.2.840.10006.300.43.1.1.1.1.6 |
| dot3adAggActorOperKey The current operational value of the Key for the Aggregator.
The administrative Key value may differ from the operational
Key value for the reasons discussed in 6.7.2. This is a 1… | column | LacpKey | .1.2.840.10006.300.43.1.1.1.1.7 |
| dot3adAggPartnerSystemID A 6-octet read-only MAC address value consisting of the
unique identifier for the current protocol Partner of this
Aggregator. A value of zero indicates that there is no known
Par… | column | SNMPv2-TCMacAddress | .1.2.840.10006.300.43.1.1.1.1.8 |
| dot3adAggPartnerSystemPriority A 2-octet read-only value that indicates the priority
value associated with the Partner's System ID. If the
aggregation is manually configured, this System Priority value
will be … | column | Integer32 | .1.2.840.10006.300.43.1.1.1.1.9 |