IEEE8023-LAG-MIB Table View

A table that contains information about every
Aggregator that is associated with this System.

dot3adAggEntry row .1.2.840.10006.300.43.1.1.1.1

A list of the Aggregator parameters. This is indexed
by the ifIndex of the Aggregator.

Indexes

dot3adAggIndex

Column	Syntax	OID
dot3adAggIndex The unique identifier allocated to this Aggregator by the local System. This attribute identifies an Aggregator instance among the subordinate managed objects of the containing object. This value is read-only. NOTE-The …	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.2.840.10006.300.43.1.1.1.1.1
dot3adAggMACAddress A 6-octet read-only value carrying the individual MAC address assigned to the Aggregator.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.2.840.10006.300.43.1.1.1.1.2
dot3adAggActorSystemPriority A 2-octet read-write value indicating the priority value associated with the Actor's System ID.	Integer32r/w Constraints: range: 0-65535	.1.2.840.10006.300.43.1.1.1.1.3
dot3adAggActorSystemID A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE-From the perspective of the Link Aggregation mechanisms described in Clause 6, only a single combinat…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.2.840.10006.300.43.1.1.1.1.4
dot3adAggAggregateOrIndividual A read-only Boolean value indicating whether the Aggregator represents an Aggregate ('TRUE') or an Individual link ('FALSE').	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.840.10006.300.43.1.1.1.1.5
dot3adAggActorAdminKey The current administrative value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discussed in 6.7.2. This is a 16-bit read-write value. The meaning o…	LacpKeyr/w Type Constraints: range: 0..65535	.1.2.840.10006.300.43.1.1.1.1.6
dot3adAggActorOperKey The current operational value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discussed in 6.7.2. This is a 16-bit read-only value. The meaning of pa…	LacpKey Type Constraints: range: 0..65535	.1.2.840.10006.300.43.1.1.1.1.7
dot3adAggPartnerSystemID A 6-octet read-only MAC address value consisting of the unique identifier for the current protocol Partner of this Aggregator. A value of zero indicates that there is no known Partner. If the aggregation is manually con…	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.2.840.10006.300.43.1.1.1.1.8
dot3adAggPartnerSystemPriority A 2-octet read-only value that indicates the priority value associated with the Partner's System ID. If the aggregation is manually configured, this System Priority value will be a value assigned by the local System.	Integer32 Constraints: range: 0-65535	.1.2.840.10006.300.43.1.1.1.1.9
dot3adAggPartnerOperKey The current operational value of the Key for the Aggregator's current protocol Partner. This is a 16-bit read-only value. If the aggregation is manually configured, this Key value will be a value assigned by the local S…	LacpKey Type Constraints: range: 0..65535	.1.2.840.10006.300.43.1.1.1.1.10
dot3adAggCollectorMaxDelay The value of this 16-bit read-write attribute defines the maximum delay, in tens of microseconds, that may be imposed by the Frame Collector between receiving a frame from an Aggregator Parser, and either delivering the…	Integer32r/w Constraints: range: 0-65535	.1.2.840.10006.300.43.1.1.1.1.11

A table that contains a list of all the ports
associated with each Aggregator.

dot3adAggPortListEntry row .1.2.840.10006.300.43.1.1.2.1

A list of the ports associated with a given Aggregator.
This is indexed by the ifIndex of the Aggregator.

Indexes

dot3adAggIndex

Column	Syntax	OID
dot3adAggPortListPorts The complete set of ports currently associated with this Aggregator. Each bit set in this list represents an Actor Port member of this Link Aggregation.	Q-BRIDGE-MIBPortList	.1.2.840.10006.300.43.1.1.2.1.1

A table that extends dot3adAggTable.

dot3adAggXEntry row .1.2.840.10006.300.43.1.1.3.1

A list of extension parameters for the Aggregator
Configuration Table

Indexes

No indexes recorded

Column	Syntax	OID
dot3adAggDescription A human-readable text string containing information about the Aggregator. This string could include information about the distribution algorithm in use on this Aggregator; for example, 'Aggregator 1, Dist Alg=Dest MAC a…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.2.840.10006.300.43.1.1.3.1.1
dot3adAggName A human-readable text string containing a locally significant name for the Aggregator. This string is read-write.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.2.840.10006.300.43.1.1.3.1.2
dot3adAggAdminState This read-write value defines the administrative state of the Aggregator. A value of 'up' indicates that the operational state of the Aggregator (aAggOperState) is permitted to be either up or down. A value of 'down' fo…	AggStater/w Type Values: 1 up 2 down	.1.2.840.10006.300.43.1.1.3.1.3
dot3adAggOperState This read-only value defines the operational state of the Aggregator. An operational state of 'up' indicates that the Aggregator is available for use by the Aggregator Client; a value of 'down' indicates that the Aggreg…	AggState Type Values: 1 up 2 down	.1.2.840.10006.300.43.1.1.3.1.4
dot3adAggTimeOfLastOperChange The time at which the interface entered its current operational state, in terms of centiseconds since the system was last reset. If the current state was entered prior to the last reinitialization of the local network m…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.2.840.10006.300.43.1.1.3.1.5
dot3adAggDataRate The current data rate, in bits per second, of the aggregate link. The value is calculated as the sum of the data rate of each link in the aggregation. This attribute is read-only.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.2.840.10006.300.43.1.1.3.1.6
dot3adAggOctetsTxOK A count of the data and padding octets transmitted by this Aggregator on all Aggregation Ports that are (or have been) members of the aggregation. The count does not include octets transmitted by the Aggregator in frame…	octetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.2.840.10006.300.43.1.1.3.1.7
dot3adAggOctetsRxOK A count of the data and padding octets received by this Aggregator, from the Aggregation Ports that are (or have been) members of the aggregation. The count does not include octets received in frames that carry LACP or …	octetsSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.2.840.10006.300.43.1.1.3.1.8
dot3adAggFramesTxOK A count of the data frames transmitted by this Aggregator on all Aggregation Ports that are (or have been) members of the aggregation. The count does not include frames transmitted by the Aggregator that carry LACP or M…	framesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.2.840.10006.300.43.1.1.3.1.9
dot3adAggFramesRxOK A count of the data frames received by this Aggregator, from the Aggregation Ports that are (or have been) members of the aggregation. The count does not include frames that carry LACP or Marker PDUs (7.3.3.1.2, 7.3.3.1…	framesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.2.840.10006.300.43.1.1.3.1.10
dot3adAggMulticastFramesTxOK A count of the data frames transmitted by this Aggregator on all Aggregation Ports that are (or have been) members of the aggregation, to a group DA other than the broadcast address. The count does not include frames tr…	framesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.2.840.10006.300.43.1.1.3.1.11
dot3adAggMulticastFramesRxOK A count of the data frames received by this Aggregator, from the Aggregation Ports that are (or have been) members of the aggregation, that were addressed to an active group address other than the broadcast address. The…	framesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.2.840.10006.300.43.1.1.3.1.12
dot3adAggBroadcastFramesTxOK A count of the broadcast data frames transmitted by this Aggregator on all Aggregation Ports that are (or have been) members of the aggregation. The count does not include frames transmitted by the Aggregator that carry…	framesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.2.840.10006.300.43.1.1.3.1.13
dot3adAggBroadcastFramesRxOK A count of the broadcast data frames received by this Aggregator, from the Aggregation Ports that are (or have been) members of the aggregation. The count does not include frames that carry LACP or Marker PDUs (7.3.3.1.…	framesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.2.840.10006.300.43.1.1.3.1.14
dot3adAggFramesDiscardedOnTx A count of data frames requested to be transmitted by this Aggregator that were discarded by the Frame Distribution function of the Aggregator when conversations are reallocated to different Aggregation Ports, due to th…	framesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.2.840.10006.300.43.1.1.3.1.15
dot3adAggFramesDiscardedOnRx A count of data frames, received on all Aggregation Ports that are (or have been) members of the aggregation, that were discarded by the Frame Collection function of the Aggregator as they were received on Aggregation P…	framesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.2.840.10006.300.43.1.1.3.1.16
dot3adAggFramesWithTxErrors A count of data frames requested to be transmitted by this Aggregator that experienced transmission errors on Aggregation Ports that are (or have been) members of the aggregation. This count does not include frames disc…	framesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.2.840.10006.300.43.1.1.3.1.17
dot3adAggFramesWithRxErrors A count of data frames discarded on reception by all Aggregation Ports that are (or have been) members of the aggregation, or that were discarded by the Frame Collection function of the Aggregator, or that were discarde…	framesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.2.840.10006.300.43.1.1.3.1.18
dot3adAggUnknownProtocolFrames A count of data frames discarded on reception by all Aggregation Ports that are (or have been) members of the aggregation, due to the detection of an unknown Slow Protocols PDU (7.3.3.1.5). This value is read-only.	framesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.2.840.10006.300.43.1.1.3.1.19
dot3adAggLinkUpDownNotificationEnable When set to 'enabled', Link Up and Link Down notifications are enabled for this Aggregator. When set to 'disabled', Link Up and Link Down notifications are disabled for this Aggregator. This value is read-write.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.2.840.10006.300.43.1.1.3.1.20
dot3adAggPortAlgorithm This object identifies the algorithm used by the Aggregator to assign frames to a Port Conversation ID. Table 6-4 provides the IEEE 802.1 OUI (00-80-C2) Port Algorithm encodings. A SEQUENCE OF OCTETS consisting of a 3…	OctetStringr/w Constraints: range: 4-4	.1.2.840.10006.300.43.1.1.3.1.21
dot3adAggPartnerAdminPortAlgorithm This object identifies the value for the algorithm of the Partner System, assigned by administrator or System policy for use when the Partner's information is unknown. Table 6-4 provides the IEEE 802.1 OUI (00-80-C2) Po…	OctetStringr/w Constraints: range: 4-4	.1.2.840.10006.300.43.1.1.3.1.22
dot3adAggPartnerAdminPortConversationListDigest The value for the digest of the prioritized Port Conversation ID-to-Link Number ID assignments of the Partner System, assigned by administrator or System policy for use when the Partner's information is unknown. Its def…	OctetStringr/w Constraints: range: 16-16	.1.2.840.10006.300.43.1.1.3.1.23
dot3adAggAdminDiscardWrongConversationdeprecated The administrative value that determines what the Aggregator does with a frame that is received from an Aggregation Port with a Port Conversation ID that is not included in the Collection_Conversation_Mask. The value 'T…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.840.10006.300.43.1.1.3.1.24
dot3adAggPartnerAdminConvServiceMappingDigest The value for the digest of the Port Conversation ID-to-Service ID assignments of the Partner System, assigned by administrator or System policy for use when the Partner's information is unknown. Its default value is se…	OctetStringr/w Constraints: range: 16-16	.1.2.840.10006.300.43.1.1.3.1.25
dot3adAggAdminDiscardWrongConversation2 The administrative value that determines whether an Aggregator discards a frame that is received from an Aggregation Port with a Port Conversation ID that is not included in the Collection_Conversation_Mask. The value '…	Enumerationr/w Enumerated Values: 1 forceTrue 2 forceFalse 3 auto	.1.2.840.10006.300.43.1.1.3.1.26

There are 4096 aAggConversationAdminPort[] variables,
aAggConversationAdminLink[0] through
aAggConversationAdminLink[4095], indexed by Port Conversation
ID. Each contains administrative values of the link selection
priority list for the referenced Port Conversation ID. This
selection priority list is a sequence of Link-Number IDs for
each Port Conversation ID, in the order of preference, highest
to lowest, for the corresponding link to carry that Port
Conversation ID. A 16-bit zero value is used to indicate
that no link is assigned to carry the associated Port
Conversation ID. NOTE - This mapping of Port Conversation
IDs to Link Number IDs is the fundamental administrative input.
An equivalent mapping of Port Conversation IDs to Port 
IDs [Conversation_PortList[]] is derived from this and 
used internally. NOTE - When a network administrator 
issues a command for selection rules, provided by
aAggConversationAdminLink[], the ChangeActorOperDist is set as 
specified in 6.6.2.2.

dot3adAggConversationAdminLinkEntry row .1.2.840.10006.300.43.1.1.4.1

An entry contains administrative values of the link selection
priority list for the referenced Port Conversation ID. This
selection priority list is a sequence of Link-Number IDs for
each Port Conversation ID, in the or…

Indexes

dot3adAggConversationAdminLinkId dot3adAggIndex

Column	Syntax	OID
dot3adAggConversationAdminLinkId An identifier for Port Conversation.	Integer32 Constraints: range: 0-4095	.1.2.840.10006.300.43.1.1.4.1.1
dot3adAggConversationAdminLinkList Each two octets of the octet string represent the agreed Link Number ID that is assigned to an Aggregation Port (7.3.2.1.27). The list is in the order of preference, highest to lowest, for corresponding preferred link t…	OctetStringr/w	.1.2.840.10006.300.43.1.1.4.1.2

There are 4096 aAggAdminServiceConversationMap[] variables,
aAggAdminServiceConversationMap[0] through
aAggAdminServiceConversationMap[4095], indexed by Port
Conversation ID. Each contains, in general, a set of Service
IDs (8.2.2), unique within the array. If the Service IDs are
representing VIDs, only a single VID is used, while in the case
that Service IDs are representing I-SIDs, more than one I-SIDs
are possible. Service IDs not contained in the map are not
mapped to any Port Conversation ID and will be discarded.

dot3adAggAdminServiceConversationMapEntry row .1.2.840.10006.300.43.1.1.5.1

An entry contains, in general, a set of Service IDs (8.2.2),
unique within the array. If the Service IDs are representing
VIDs, only a single VID is applicable, while in the case that
Service IDs are representing I-SIDs…

Indexes

dot3adAggAdminServiceConversationMapId dot3adAggIndex

Column	Syntax	OID
dot3adAggAdminServiceConversationMapId The Port Conversation ID used to index Conversation Map entries.	Integer32 Constraints: range: 0-4095	.1.2.840.10006.300.43.1.1.5.1.1
dot3adAggAdminServiceConversationServiceIDList A list contains, in general, a set of Service IDs (8.2.2), unique within the array.	ServiceIdListr/w	.1.2.840.10006.300.43.1.1.5.1.2

A table that contains Link Aggregation Control
configuration information about every
Aggregation Port associated with this device.
A row appears in this table for each physical port.

dot3adAggPortEntry row .1.2.840.10006.300.43.1.2.1.1

A list of Link Aggregation Control configuration
parameters for each Aggregation Port on this device.

Indexes

dot3adAggPortIndex

Column	Syntax	OID
dot3adAggPortIndex The unique identifier allocated to this Aggregation Port by the local System. This attribute identifies an Aggregation Port instance among the subordinate managed objects of the containing object. This value is read-onl…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.2.840.10006.300.43.1.2.1.1.1
dot3adAggPortActorSystemPriority A 2-octet read-write value used to define the priority value associated with the Actor's System ID.	Integer32r/w Constraints: range: 0-65535	.1.2.840.10006.300.43.1.2.1.1.2
dot3adAggPortActorSystemID A 6-octet read-only MAC address value that defines the value of the System ID for the System that contains this Aggregation Port.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.2.840.10006.300.43.1.2.1.1.3
dot3adAggPortActorAdminKey The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-write value. The meaning of particular Key values is of local significance.	LacpKeyr/w Type Constraints: range: 0..65535	.1.2.840.10006.300.43.1.2.1.1.4
dot3adAggPortActorOperKey The current operational value of the Key for the Aggregation Port. This is a 16-bit read-only value. The meaning of particular Key values is of local significance.	LacpKey Type Constraints: range: 0..65535	.1.2.840.10006.300.43.1.2.1.1.5
dot3adAggPortPartnerAdminSystemPriority A 2-octet read-write value used to define the administrative value of priority associated with the Partner's System ID. The assigned value is used, along with the value of aAggPortPartnerAdminSystemID, aAggPortPartnerAd…	Integer32r/w Constraints: range: 0-65535	.1.2.840.10006.300.43.1.2.1.1.6
dot3adAggPortPartnerOperSystemPriority A 2-octet read-only value indicating the operational value of priority associated with the Partner's System ID. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminSystem…	Integer32 Constraints: range: 0-65535	.1.2.840.10006.300.43.1.2.1.1.7
dot3adAggPortPartnerAdminSystemID A 6-octet read-write MACAddress value representing the administrative value of the Aggregation Port's protocol Partner's System ID. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority,…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.2.840.10006.300.43.1.2.1.1.8
dot3adAggPortPartnerOperSystemID A 6-octet read-only MACAddress value representing the current value of the Aggregation Port's protocol Partner's System ID. A value of zero indicates that there is no known protocol Partner. The value of this attribute …	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.2.840.10006.300.43.1.2.1.1.9
dot3adAggPortPartnerAdminKey The current administrative value of the Key for the protocol Partner. This is a 16-bit read-write value. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystem…	LacpKeyr/w Type Constraints: range: 0..65535	.1.2.840.10006.300.43.1.2.1.1.10
dot3adAggPortPartnerOperKey The current operational value of the Key for the protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminKey if there is no protocol Partner. This is a 16-b…	LacpKey Type Constraints: range: 0..65535	.1.2.840.10006.300.43.1.2.1.1.11
dot3adAggPortSelectedAggID The identifier value of the Aggregator that this Aggregation Port has currently selected. Zero indicates that the Aggregation Port has not selected an Aggregator, either because it is in the process of detaching from an…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.2.840.10006.300.43.1.2.1.1.12
dot3adAggPortAttachedAggID The identifier value of the Aggregator that this Aggregation Port is currently attached to. Zero indicates that the Aggregation Port is not currently attached to an Aggregator. This value is read-only.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.2.840.10006.300.43.1.2.1.1.13
dot3adAggPortActorPort The port number locally assigned to the Aggregation Port. The port number is communicated in LACPDUs as the Actor_Port. This value is read-only.	Integer32 Constraints: range: 0-65535	.1.2.840.10006.300.43.1.2.1.1.14
dot3adAggPortActorPortPriority The priority value assigned to this Aggregation Port. This 16-bit value is read-write. NOTE-In the case of DRNI (Clause 9), the two least significant bits of the priority for each Aggregation Port in a Distributed Relay…	Integer32r/w Constraints: range: 0-65535	.1.2.840.10006.300.43.1.2.1.1.15
dot3adAggPortPartnerAdminPort The current administrative value of the port number for the protocol Partner. This is a 16-bit read-write value. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdm…	Integer32r/w Constraints: range: 0-65535	.1.2.840.10006.300.43.1.2.1.1.16
dot3adAggPortPartnerOperPort The operational port number assigned to this Aggregation Port by the Aggregation Port's protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminPort if ther…	Integer32 Constraints: range: 0-65535	.1.2.840.10006.300.43.1.2.1.1.17
dot3adAggPortPartnerAdminPortPriority The current administrative value of the port priority for the protocol Partner. This is a 16-bit read-write value. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerA…	Integer32r/w Constraints: range: 0-65535	.1.2.840.10006.300.43.1.2.1.1.18
dot3adAggPortPartnerOperPortPriority The priority value assigned to this Aggregation Port by the Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminPortPriority if there is no protocol Partner. Thi…	Integer32 Constraints: range: 0-65535	.1.2.840.10006.300.43.1.2.1.1.19
dot3adAggPortActorAdminState A string of 8 bits, corresponding to the administrative values of Actor_State (5.4.2) as transmitted by the Actor in LACPDUs. The first bit corresponds to bit 0 of Actor_State (LACP_Activity), the second bit corresponds…	LacpStater/w Type Values: 0 lacpActivity 1 lacpTimeout 2 aggregation 3 synchronization 4 collecting 5 distributing 6 defaulted 7 expired	.1.2.840.10006.300.43.1.2.1.1.20
dot3adAggPortActorOperState A string of 8 bits, corresponding to the current operational values of Actor_State as transmitted by the Actor in LACPDUs. The bit allocations are as defined in 7.3.2.1.20. This attribute value is read-only.	LacpState Type Values: 0 lacpActivity 1 lacpTimeout 2 aggregation 3 synchronization 4 collecting 5 distributing 6 defaulted 7 expired	.1.2.840.10006.300.43.1.2.1.1.21
dot3adAggPortPartnerAdminState A string of 8 bits, corresponding to the current administrative value of Actor_State for the protocol Partner. The bit allocations are as defined in 7.3.2.1.20. This attribute value is read-write. The assigned value is …	LacpStater/w Type Values: 0 lacpActivity 1 lacpTimeout 2 aggregation 3 synchronization 4 collecting 5 distributing 6 defaulted 7 expired	.1.2.840.10006.300.43.1.2.1.1.22
dot3adAggPortPartnerOperState A string of 8 bits, corresponding to the current values of Actor_State in the most recently received LACPDU transmitted by the protocol Partner. The bit allocations are as defined in 7.3.2.1.20. In the absence of an act…	LacpState Type Values: 0 lacpActivity 1 lacpTimeout 2 aggregation 3 synchronization 4 collecting 5 distributing 6 defaulted 7 expired	.1.2.840.10006.300.43.1.2.1.1.23
dot3adAggPortAggregateOrIndividual A read-only Boolean value indicating whether the Aggregation Port is able to Aggregate ('TRUE') or is only able to operate as an Individual link ('FALSE').	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.840.10006.300.43.1.2.1.1.24

A table that contains Link Aggregation information
about every port that is associated with this device.
A row appears in this table for each physical port.

dot3adAggPortStatsEntry row .1.2.840.10006.300.43.1.2.2.1

A list of Link Aggregation Control Protocol statistics
for each port on this device.

Indexes

dot3adAggPortIndex

Column	Syntax	OID
dot3adAggPortStatsLACPDUsRx The number of valid LACPDUs received on this Aggregation Port. This value is read-only.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.2.840.10006.300.43.1.2.2.1.1
dot3adAggPortStatsMarkerPDUsRx The number of valid Marker PDUs received on this Aggregation Port. This value is read-only.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.2.840.10006.300.43.1.2.2.1.2
dot3adAggPortStatsMarkerResponsePDUsRx The number of valid Marker Response PDUs received on this Aggregation Port. This value is read-only.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.2.840.10006.300.43.1.2.2.1.3
dot3adAggPortStatsUnknownRx The number of frames received that either: - carry the Slow Protocols Ethernet Type value (IEEE Std 802.3-2008, Annex 57A.4), but contain an unknown PDU, or: - are addressed to the Slow Protocols group MAC Address…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.2.840.10006.300.43.1.2.2.1.4
dot3adAggPortStatsIllegalRx The number of frames received that carry the Slow Protocols Ethernet Type value (IEEE Std 802.3-2008, Annex 57A.4), but contain a badly formed PDU or an illegal value of Protocol Subtype (IEEE Std 802.3-2008, Annex 57A.…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.2.840.10006.300.43.1.2.2.1.5
dot3adAggPortStatsLACPDUsTx The number of LACPDUs transmitted on this Aggregation Port. This value is read-only.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.2.840.10006.300.43.1.2.2.1.6
dot3adAggPortStatsMarkerPDUsTx The number of Marker PDUs transmitted on this Aggregation Port. This value is read-only.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.2.840.10006.300.43.1.2.2.1.7
dot3adAggPortStatsMarkerResponsePDUsTx The number of Marker Response PDUs transmitted on this Aggregation Port. This value is read-only.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.2.840.10006.300.43.1.2.2.1.8

A table that contains Link Aggregation debug
information about every port that is associated with
this device.  A row appears in this table for each
physical port.

dot3adAggPortDebugEntry row .1.2.840.10006.300.43.1.2.3.1

A list of the debug parameters for a port.

Indexes

dot3adAggPortIndex

Column	Syntax	OID
dot3adAggPortDebugRxState This attribute holds the value 'currentRx' if the Receive state machine for the Aggregation Port is in the CURRENT state, 'expired' if the Receive state machine is in the EXPIRED state, 'defaulted' if the Receive state…	Enumeration Enumerated Values: 1 currentRx 2 expired 3 defaulted 4 initialize 5 lacpDisabled 6 portDisabled	.1.2.840.10006.300.43.1.2.3.1.1
dot3adAggPortDebugLastRxTime The time at which the last LACPDU was received by this Aggregation Port, in terms of centiseconds since the system was last reset. The ifLastChange object in the Interfaces MIB defined in IETF RFC 2863 is a suitable obj…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.2.840.10006.300.43.1.2.3.1.2
dot3adAggPortDebugMuxState This attribute holds the value 'detached' if the Mux state machine (5.4.14) for the Aggregation Port is in the DETACHED state, 'waiting' if the Mux state machine is in the WAITING state, 'attached' if the Mux state mach…	Enumeration Enumerated Values: 1 detached 2 waiting 3 attached 4 collecting 5 distributing 6 collectingDistributing	.1.2.840.10006.300.43.1.2.3.1.3
dot3adAggPortDebugMuxReason A human-readable text string indicating the reason for the most recent change of Mux machine state. This value is read-only.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.2.840.10006.300.43.1.2.3.1.4
dot3adAggPortDebugActorChurnState The state of the Actor Churn Detection machine (6.4.17) for the Aggregation Port. A value of 'noChurn' indicates that the state machine is in either the NO_ACTOR_CHURN or the ACTOR_CHURN_MONITOR state, and 'churn' indic…	ChurnState Type Values: 1 noChurn 2 churn 3 churnMonitor	.1.2.840.10006.300.43.1.2.3.1.5
dot3adAggPortDebugPartnerChurnState The state of the Partner Churn Detection machine (6.4.17) for the Aggregation Port. A value of 'noChurn' indicates that the state machine is in either the NO_PARTNER_CHURN or the PARTNER_CHURN_MONITOR state, and 'churn'…	ChurnState Type Values: 1 noChurn 2 churn 3 churnMonitor	.1.2.840.10006.300.43.1.2.3.1.6
dot3adAggPortDebugActorChurnCount Count of the number of times the Actor Churn state machine has entered the ACTOR_CHURN state. This value is read-only.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.2.840.10006.300.43.1.2.3.1.7
dot3adAggPortDebugPartnerChurnCount Count of the number of times the Partner Churn state machine has entered the PARTNER_CHURN state. This value is read-only.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.2.840.10006.300.43.1.2.3.1.8
dot3adAggPortDebugActorSyncTransitionCount Count of the number of times the Actor's Mux state machine (6.4.15) has entered the IN_SYNC state. This value is read-only.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.2.840.10006.300.43.1.2.3.1.9
dot3adAggPortDebugPartnerSyncTransitionCount Count of the number of times the Partner's Mux state machine (6.4.15) has entered the IN_SYNC state. This value is read-only.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.2.840.10006.300.43.1.2.3.1.10
dot3adAggPortDebugActorChangeCount Count of the number of times the Actor's perception of the LAG ID for this Aggregation Port has changed. This value is read-only.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.2.840.10006.300.43.1.2.3.1.11
dot3adAggPortDebugPartnerChangeCount Count of the number of times the Partner's perception of the LAG ID (see 6.3.6.1) for this Aggregation Port has changed. This value is read-only.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.2.840.10006.300.43.1.2.3.1.12

A table that extends dot3adAggPortTable.

dot3adAggPortXEntry row .1.2.840.10006.300.43.1.2.4.1

A list of extension parameters for Aggregation Port.

Indexes

No indexes recorded

Column	Syntax	OID
dot3adAggPortProtocolDA A 6-octet read-write MACAddress value specifying the DA to be used when sending Link Aggregation Control and Marker PDUs on this Aggregation Port, corresponding to the value of Protocol_DA in 6.2.8.1.2, 6.2.10.1.3 and …	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.2.840.10006.300.43.1.2.4.1.1

A table that extends dot3adAggPortTable.

dot3adAggPortSecondXEntry row .1.2.840.10006.300.43.1.2.5.1

A list of extension parameters for Aggregation Port.

Indexes

No indexes recorded

Column	Syntax	OID
dot3adAggPortOperConversationPasses A read-only current operational vector of Boolean values, with one value for each possible Port Conversation ID. A 1 indicates that the Port Conversation ID is distributed through this Aggregation Port, and a 0 indicate…	OctetString Constraints: range: 512-512	.1.2.840.10006.300.43.1.2.5.1.1
dot3adAggPortOperConversationCollected A read-only current operational vector of Boolean values, with one value for each possible Port Conversation ID. A 1 indicates that the Port Conversation ID is collected through this Aggregation Port, and a 0 indicates …	OctetString Constraints: range: 512-512	.1.2.840.10006.300.43.1.2.5.1.2
dot3adAggPortLinkNumberId The Link Number ID value configured for this Aggregation Port by the System's administrator. When the Link Number ID value matches one of the non zero values in the selection prioritized lists in aAggConversationAdminLi…	Integer32r/w Constraints: range: 0-65535	.1.2.840.10006.300.43.1.2.5.1.3
dot3adAggPortPartnerAdminLinkNumberIddeprecated The value for the Link Number ID of the Partner System for this Aggregation Port, assigned by administrator or System policy for use when the Partner's information is unknown. Its default value is set to 0.	Integer32r/w Constraints: range: 0-65535	.1.2.840.10006.300.43.1.2.5.1.4
dot3adAggPortWTRTime The wait-to-restore (WTR) period accompanying selection rules set by aAggConversationAdminLink[] in a command issued by a network administrator. It may be configured in steps of 1 min between 5 min and 12 min, while two…	Integer32r/w Constraints: range: 0-0 range: 5-12 range: 100-100	.1.2.840.10006.300.43.1.2.5.1.5
dot3adAggPortEnableLongPDUXmit A read-write Boolean value indicating whether the Aggregation Port is able to transmit LACPDUs longer than 110 octets ('TRUE') or is only able to transmit fixed size 110 octet LACPDUs ('FALSE'). Its default value is 'T…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.840.10006.300.43.1.2.5.1.6

A table that extends dot3adAggPortDebugTable.

dot3adAggPortDebugXEntry row .1.2.840.10006.300.43.1.2.6.1

A list of extension parameters for the LACP Port Debug table.

Indexes

No indexes recorded

Column	Syntax	OID
dot3adAggPortDebugActorCDSChurnState This managed object is applicable only when Conversation-sensitive frame collection and distribution as specified in 6.6 is supported. The state of the Actor CDS Churn Detection machine (6.6.2.7) for the Aggregation Por…	ChurnState Type Values: 1 noChurn 2 churn 3 churnMonitor	.1.2.840.10006.300.43.1.2.6.1.1
dot3adAggPortDebugPartnerCDSChurnState This managed object is applicable only when Conversation-sensitive frame collection and distribution as specified in 6.6 is supported. The state of the Partner CDS Churn Detection machine (6.6.2.7) for the Aggregation P…	ChurnState Type Values: 1 noChurn 2 churn 3 churnMonitor	.1.2.840.10006.300.43.1.2.6.1.2
dot3adAggPortDebugActorCDSChurnCount This managed object is applicable only when Conversation-sensitive frame collection and distribution as specified in 6.6 is supported. Count of the number of times the Actor CDS Churn state machine has entered the ACTOR…	times entered ACTOR_CDS_CHURNSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.2.840.10006.300.43.1.2.6.1.3
dot3adAggPortDebugPartnerCDSChurnCount This managed object is applicable only when Conversation-sensitive frame collection and distribution as specified in 6.6 is supported. Count of the number of times the Partner CDS Churn state machine has entered the PAR…	times entered PARTNER_CDS_CHURNSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.2.840.10006.300.43.1.2.6.1.4

A table that contains information about every
DRNI that is associated with this System.

dot3adDrniEntry row .1.2.840.10006.300.43.1.4.1.1

A list of the DRNI parameters. This is indexed
by the DRNI Portal ID.

Indexes

dot3adDrniIndex

Column	Syntax	OID
dot3adDrniIndex The unique identifier allocated to this Distributed Relay by the local System. This attribute identifies a Distributed Relay instance among the subordinate managed objects of the containing object. This value is read-on…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.2.840.10006.300.43.1.4.1.1.1
dot3adDrniDescription A human-readable text string containing information about the Distribute Relay. This string is read-only. The contents are vendor specific.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.2.840.10006.300.43.1.4.1.1.2
dot3adDrniName A human-readable text string containing a locally significant name for the Distributed Relay. This string is read-write.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.2.840.10006.300.43.1.4.1.1.3
dot3adDrniPortalAddr A read-write identifier of a particular Portal. aDrniPortalAddr has to be unique among at least all of the potential Portal Systems to which a given Portal System might be attached via an IPL Intra-Portal Link. Also use…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.2.840.10006.300.43.1.4.1.1.4
dot3adDrniPortalPriority A 2-octet read-write value indicating the priority value associated with the Portal's System ID. Also used as the Actor's System Priority (6.3.2) for the emulated system.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.2.840.10006.300.43.1.4.1.1.5
dot3adDrniThreePortalSystem A read-write Boolean value indicating whether this Portal System is part of a Portal consisting of three Portal Systems or not. Value 1 stands for a Portal of three Portal Systems, value 0 stands for a Portal of two Por…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.840.10006.300.43.1.4.1.1.6
dot3adDrniPortalSystemNumber A read-write identifier of this particular Portal System within a Portal. It is the responsibility of the network administrator to ensure that these numbers are unique among the Portal Systems with the same aDrniPortalA…	Integer32r/w Constraints: range: 1-3	.1.2.840.10006.300.43.1.4.1.1.7
dot3adDrniIntraPortalLinkList Read-write list of the Interface Identifiers of the Ports to the Intra-Portal Links assigned to this Distributed Relay. Each Interface Identifier, a Port ID (6.3.4), has the two least significant bits of its Port Priori…	PortalLinkListr/w Type Constraints: range: 12	.1.2.840.10006.300.43.1.4.1.1.8
dot3adDrniAggregator An INTEGER that matches the syntax of an Interface Identifier. Read-write Interface Identifier of the Aggregator Port assigned to this Distributed Relay.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.2.840.10006.300.43.1.4.1.1.9
dot3adDrniNeighborAdminConvGatewayListDigest The value for the digest of the prioritized Gateway Conversation ID-to-Gateway assignments of the Neighbor Portal System, assigned by administrator or System policy for use when the Neighbor Portal System's information …	OctetStringr/w Constraints: range: 16-16	.1.2.840.10006.300.43.1.4.1.1.10
dot3adDrniNeighborAdminConvPortListDigest The value for the digest of the prioritized Port Conversation ID-to-Aggregation Port assignments of the Neighbor Portal System, assigned by administrator or System policy for use when the Neighbor Portal System's inform…	OctetStringr/w Constraints: range: 16-16	.1.2.840.10006.300.43.1.4.1.1.11
dot3adDrniGatewayAlgorithm This object identifies the algorithm used by the DR Function to assign frames to a Gateway Conversation ID. Table 9-7 provides the IEEE 802.1 OUI (00-80-C2) Gateway Algorithm encodings. A SEQUENCE OF OCTETS consisting o…	OctetStringr/w Constraints: range: 4-4	.1.2.840.10006.300.43.1.4.1.1.12
dot3adDrniNeighborAdminGatewayAlgorithm This object identifies the value for the Gateway algorithm of the Neighbor Portal System, assigned by administrator or System policy for use when the Neighbor Portal System's information is unknown. Table 9-7 provides t…	OctetStringr/w Constraints: range: 16-16	.1.2.840.10006.300.43.1.4.1.1.13
dot3adDrniNeighborAdminPortAlgorithm This object identifies the value for the Port Algorithm of the Neighbor Portal System, assigned by administrator or System policy for use when the Neighbor Portal System's information is unknown. Table 6-4 provides the …	OctetStringr/w Constraints: range: 16-16	.1.2.840.10006.300.43.1.4.1.1.14
dot3adDrniNeighborAdminDRCPState A string of 8 bits, corresponding to the administrative values of DRCP_State [item s) in 9.4.3.2] as transmitted by this Portal System in DRCPDUs. The first bit corresponds to bit 0 of DRCP_State (HomeGateway), the seco…	DrcpStater/w Type Values: 0 homeGateway 1 neighborGateway 2 otherGateway 3 ippActivity 4 timeout 5 gatewaySync 6 portSync 7 expired	.1.2.840.10006.300.43.1.4.1.1.15
dot3adDrniEncapsulationMethod This managed object is applicable only when Network / IPL sharing by time (9.3.2.1) or Network / IPL sharing by tag (9.3.2.2) or Network / IPL sharing by encapsulation (9.3.2.3) is supported. The object identifies the v…	OctetStringr/w Constraints: range: 4-4	.1.2.840.10006.300.43.1.4.1.1.16
dot3adDrniDRPortConversationPasses A read-only current operational vector of Boolean values, with one value for each possible Port Conversation ID. A 1 indicates that the Port Conversation ID is allowed to be distributed through this DR Function's Aggreg…	OctetString Constraints: range: 512-512	.1.2.840.10006.300.43.1.4.1.1.17
dot3adDrniDRGatewayConversationPasses A read-only current operational vector of Boolean values, with one value for each possible Gateway Conversation ID. A 1 indicates that the Gateway Conversation ID is allowed to pass through this DR Function's Gateway, a…	OctetString Constraints: range: 512-512	.1.2.840.10006.300.43.1.4.1.1.18
dot3adDrniPSI A read-only Boolean value providing the value of PSI, which indicates whether this Portal System is isolated from the other Portal Systems within the same Portal ('TRUE') or not ('FALSE').	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.840.10006.300.43.1.4.1.1.19
dot3adDrniPortConversationControl A read-write Boolean value that controls the operation of the updateDRFHomeState (9.4.11). When set to 'TRUE' the Home Gateway Vector is set equal to Drni_Portal_System_Port_Conversation. Setting this object to 'TRUE' i…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.2.840.10006.300.43.1.4.1.1.20
dot3adDrniIntraPortalPortProtocolDA A 6-octet read-write MAC Address value specifying the destination address to be used when sending DRCPDUs, corresponding to the value of DRCP_Protocol_DA in 9.4.4.1.3. Its values is one of the addresses selected from Ta…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.2.840.10006.300.43.1.4.1.1.21

There are 4096 aDrniConvAdminGateway[] variables,
aDrniConvAdminGateway[0] through aDrniConvAdminGateway[4095],
indexed by Gateway Conversation ID. Each contains
administrative values of the Gateway selection priority list
for the Distributed Relay for the referenced Gateway
Conversation ID. This selection priority list, a sequence of
integers for each Gateway Conversation ID, is a list of Portal
System Numbers in the order of preference, highest to lowest,
for the corresponding preferred Portal System's Gateway to
carry that Conversation. NOTE - To the extent that the network
administrator fails to configure the same values for the
aDrniConvAdminGateway[] variables in all of the DR Functions
of a Portal, frames can be misdirected. The DRCP (9.4) detects
such misconfiguration.

dot3adDrniConvAdminGatewayEntry row .1.2.840.10006.300.43.1.4.2.1

A Gateway selection priority list for the Distributed Relay
for the referenced Gateway Conversation ID. This selection
priority list, a sequence of integers for each Gateway
Conversation ID, is a list of Portal System N…

Indexes

dot3adDrniGatewayConversationID dot3adDrniIndex

Column	Syntax	OID
dot3adDrniGatewayConversationID An identifer for a Gateway Conversation.	Integer32 Constraints: range: 0-4095	.1.2.840.10006.300.43.1.4.2.1.1
dot3adDrniConvAdminGatewayList Priority list of Portal System Numbers in order of preference from highest to lowest.	DrniConvAdminGatewayListr/w Type Constraints: range: 3	.1.2.840.10006.300.43.1.4.2.1.2

This managed object is applicable only when Network / IPL
sharing by tag (9.3.2.2) or Network / IPL sharing by encapsulation
(9.3.2.3) is supported. Each entry represents the value of the
identifier used for an IPL frame associated with that Gateway
Conversation ID for the encapsulation method specified in
7.4.1.1.17.

dot3adDrniIPLEncapMapEntry row .1.2.840.10006.300.43.1.4.3.1

An entry represents the value of the identifier used for an
IPL frame associated with that Gateway Conversation ID for the
encapsulation method specified in 7.4.1.1.17.

Indexes

dot3adDrniGatewayConversationID dot3adDrniIndex

Column	Syntax	OID
dot3adDrniIPLFrameIdValue The value of the identifier used for an IPL frame associated with that Gateway Conversation ID for the encapsulation method.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.2.840.10006.300.43.1.4.3.1.2

This managed object is applicable only when Network /
IPL sharing by tag (9.3.2.2) is supported. Each entry
represents the translated value of the identifier used
for a network frame associated with that Gateway
Conversation ID when the method specified in 7.4.1.1.17
is the Network / IPL sharing by tag method specified in
9.3.2.2 and the network frames need to share the tag
space used by IPL frames.

dot3adDrniNetEncapMapEntry row .1.2.840.10006.300.43.1.4.4.1

An entry represents the translated value of the identifier
used for a network frame associated with that Gateway
Conversation ID when the method specified in 7.4.1.1.12 is the
Network / IPL sharing by tag method specifi…

Indexes

dot3adDrniGatewayConversationID dot3adDrniIndex

Column	Syntax	OID
dot3adDrniNetFrameIdValue The translated value of the identifier used for a network frame associated that Gateway Conversation ID.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.2.840.10006.300.43.1.4.4.1.1

A table that contains information about every
IPP that is associated with this System.

dot3adIPPAttributeEntry row .1.2.840.10006.300.43.1.5.1.1

An entry containing Attributes for an IPP.

Indexes

dot3adIPPIndex

Column	Syntax	OID
dot3adIPPIndex The unique identifier allocated to this IPP by the local Portal System. This attribute identifies an IPP instance among the subordinate managed objects of the containing object. This value is read-only. NOTE-The aIPPID …	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.2.840.10006.300.43.1.5.1.1.1
dot3adIPPPortConversationPasses A read-only current operational vector of Boolean values, with one value for each possible Port Conversation ID. A 1 indicates that the Port Conversation ID is allowed to be transmitted through this IPP Intra-Portal Por…	OctetString Constraints: range: 512-512	.1.2.840.10006.300.43.1.5.1.1.2
dot3adIPPGatewayConversationDirection A read-only current operational vector of Boolean values, with one value for each possible Gateway Conversation ID. A 1 indicates that the Gateway Conversation ID is assigned to Gateways reachable through this IPP Intra…	OctetString Constraints: range: 512-512	.1.2.840.10006.300.43.1.5.1.1.3
dot3adIPPAdminState This read-write value defines the administrative state of the IPP. A value of 'up' indicates that the operational state of the IPP (aIPPOperState) is permitted to be either up or down. A value of 'down' forces the opera…	AggStater/w Type Values: 1 up 2 down	.1.2.840.10006.300.43.1.5.1.1.4
dot3adIPPOperState This read-only value defines the operational state of the IPP. The operational state is 'up' if the IPL is operational, and if the value of aIPPAdminState for the IPP is also 'up'. If the IPL is not operational, or if t…	AggState Type Values: 1 up 2 down	.1.2.840.10006.300.43.1.5.1.1.5
dot3adIPPTimeOfLastOperChange The time at which the interface entered its current operational state, in terms of centiseconds since the system was last reset. If the current state was entered prior to the last reinitialization of the local network m…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.2.840.10006.300.43.1.5.1.1.6

A table that contains information for IPP
statistics. A row appears in this table for
each IPP in the system.

dot3adIPPStatsEntry row .1.2.840.10006.300.43.1.5.2.1

An entry containing Statistics for an IPP.

Indexes

dot3adIPPIndex

Column	Syntax	OID
dot3adIPPStatsDRCPDUsRx The number of valid DRCPDUs received on this IPP. This value is read-only.	framesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.2.840.10006.300.43.1.5.2.1.1
dot3adIPPStatsIllegalRx The number of frames received that carry the DRCP Ethernet Type value (9.4.2.4), but contain a badly formed PDU. This value is read-only.	framesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.2.840.10006.300.43.1.5.2.1.2
dot3adIPPStatsDRCPDUsTx The number of DRCPDUs transmitted on this IPP. This value is read-only.	framesSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.2.840.10006.300.43.1.5.2.1.3

A table that contains IPP debug information.
A row appears in this table for each IPP in
the system.

dot3adIPPDebugEntry row .1.2.840.10006.300.43.1.5.3.1

An entry containing Debug Information for an IPP.

Indexes

dot3adIPPIndex

Column	Syntax	OID
dot3adIPPDebugDRCPRxState This attribute holds the value 'current' if the DRCPDU Receive state machine for the IPP is in the CURRENT state, 'expired' if the DRCPDU Receive state machine is in the EXPIRED state, 'defaulted' if the DRCPDU Receive …	Enumeration Enumerated Values: 1 current 2 expired 3 defaulted 4 initialize 5 reportToManagement	.1.2.840.10006.300.43.1.5.3.1.1
dot3adIPPDebugLastRxTime The time at which the last DRCPDU was received by this IPP, in terms of centiseconds since the system was last reset. The ifLastChange object in the Interfaces MIB defined in IETF RFC 2863 is a suitable object for suppl…	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.2.840.10006.300.43.1.5.3.1.2
dot3adIPPDebugDifferPortalReason A human-readable text string indicating the most recent set of variables that are responsible for setting the variable Differ_Portal or Differ_Conf_Portal (9.4.8) on this IPP to TRUE. This value is read-only.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.2.840.10006.300.43.1.5.3.1.3