ieee8021TeipsV2IpgConfigHoldOff
IEEE8021-TEIPS-V2-MIB ·
.1.3.111.2.802.1.1.27.1.4.1.7
Object
column
r/w
deciseconds Unsigned32
This column is used to configure the hold off timer. The purpose is to allow IPS to fix the problem before a higher-layer mechanism, such as PBB-TE TESI protection, is invoked or to allow an inner IPG to fix the problem before IPS is invoked by the outer IPG when IPGs are nested. The hold off timer has a period of from 0 to 10 seconds, the default being 0, with a 100ms granularity.
Context
- MIB
- IEEE8021-TEIPS-V2-MIB
- OID
.1.3.111.2.802.1.1.27.1.4.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Units
- deciseconds
- Parent
- ieee8021TeipsV2IpgConfigEntry
- Table
- ieee8021TeipsV2IpgConfigTable
- Siblings
- 10
Syntax
deciseconds Unsigned32
Values & Constraints
Object Constraints
range: 0-100
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ieee8021TeipsV2IpgConfigState This column indicates the current state of the
protection switching state machine for an IPG.
The value can be one of the following:
workingSegment(1) The prote… | column | Enumeration | .1.3.111.2.802.1.1.27.1.4.1.1 |
| ieee8021TeipsV2IpgConfigNotifyEnable This column is used to enable or disable transmission
of ieee8021TeipsV2IpgAdminFailure notifications.
These notifications are generated whenever an
administrative command cannot … | column | SNMPv2-TCTruthValue | .1.3.111.2.802.1.1.27.1.4.1.10 |
| ieee8021TeipsV2IpgConfigStorageType This object indicates the persistence of this entry. For
permanent objects the ieee8021TeipsV2IpgConfigCommandAdmin
column must be writable. | column | SNMPv2-TCStorageType | .1.3.111.2.802.1.1.27.1.4.1.11 |
| ieee8021TeipsV2IpgConfigCommandStatus This column indicates the status of
administrative commands within the
protection group. It reflects the current
operational administrative command being
acted upon by the IPG. | column | IEEE8021-TC-MIBIEEE8021TeipsIpgConfigAdmin | .1.3.111.2.802.1.1.27.1.4.1.2 |
| ieee8021TeipsV2IpgConfigCommandLast This column indicates the last attempted administrative
command applied to the IPG. It is changed
whenever a write is made to the CommandAdmin column of
this table and is essenti… | column | IEEE8021-TC-MIBIEEE8021TeipsIpgConfigAdmin | .1.3.111.2.802.1.1.27.1.4.1.3 |
| ieee8021TeipsV2IpgConfigCommandAdmin This column is used by the operator to request
that the IPG state machine perform some
administrative operation. The operator requests
a command by writing the command value to t… | column | IEEE8021-TC-MIBIEEE8021TeipsIpgConfigAdmin | .1.3.111.2.802.1.1.27.1.4.1.4 |
| ieee8021TeipsV2IpgConfigActiveRequests This column shows the status of active requests
associated with the IPG. | column | IEEE8021-TC-MIBIEEE8021TeipsIpgConfigActiveRequests | .1.3.111.2.802.1.1.27.1.4.1.5 |
| ieee8021TeipsV2IpgConfigWTR This column is used to configure the
wait-to-restore timer for the IPG operation.
The timer may be configured in steps of 1 minute
between 5 and 12 minutes, the default being 5.
A… | column | minutes Unsigned32 | .1.3.111.2.802.1.1.27.1.4.1.6 |
| ieee8021TeipsV2IpgM1ConfigState This column indicates the current state of the M:1 protection
switching state machine for an IPG if M:1 IPS is supported.
The value can be one of the following:
psA… | column | Enumeration | .1.3.111.2.802.1.1.27.1.4.1.8 |
| ieee8021TeipsV2IpgConfigMWTR This column is used to configure the M:1 wait-to-restore
timer for the IPG operation if M:1 protection is
supported. The timer may be configured in steps of
1 minute between 5 an… | column | minutes Unsigned32 | .1.3.111.2.802.1.1.27.1.4.1.9 |