IEEE8021-TEIPS-V2-MIB

        MIB Module for managing systems that provide Provider
Backbone Bridge Traffic Engineering (PBB-TE) Infrastructure
Segment Protection.
        
Unless otherwise indicated, the references in this
MIB module are to IEEE Std 802.1Q.
        
Copyright (C) IEEE (2018).  All Rights Reserved
        
This MIB module is part of IEEE 802.1Q;
See the IEEE 802.1Q standard for full legal notices.
    
Source file
IEEE8021-TEIPS-V2-MIB
Last revised
Identity
ieee8021TeipsV2Mib
Base OID
1.3.111.2.802.1.1.27
Imported Objects
IEEE8021-BRIDGE-MIB ieee8021BridgeBaseComponentId
IEEE8021-TC-MIB IEEE8021BridgePortNumber IEEE8021PbbTeTSidId IEEE8021TeipsIpgConfigActiveRequests IEEE8021TeipsIpgConfigAdmin IEEE8021TeipsIpgid ieee802dot1mibs
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC RowStatus StorageType TruthValue
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'IEEE8021-TEIPS-V2-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'IEEE8021-TEIPS-V2-MIB::ieee8021TeipsV2Mib'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IEEE8021-TEIPS-V2-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IEEE8021-TEIPS-V2-MIB::ieee8021TeipsV2Mib'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (42)
.1.3.111.2.802.1.1.27
.1.3.111.2.802.1.1.27.0
.1.3.111.2.802.1.1.27.1
.1.3.111.2.802.1.1.27.1.1
.1.3.111.2.802.1.1.27.1.1.1
.1.3.111.2.802.1.1.27.1.1.1.1
.1.3.111.2.802.1.1.27.1.1.1.2
.1.3.111.2.802.1.1.27.1.1.1.3
.1.3.111.2.802.1.1.27.1.1.1.4
.1.3.111.2.802.1.1.27.1.1.1.5
.1.3.111.2.802.1.1.27.1.1.1.6
.1.3.111.2.802.1.1.27.1.1.1.7
.1.3.111.2.802.1.1.27.1.2
.1.3.111.2.802.1.1.27.1.2.1
Unsigned32
.1.3.111.2.802.1.1.27.1.2.1.1
.1.3.111.2.802.1.1.27.1.2.1.2
.1.3.111.2.802.1.1.27.1.2.1.3
.1.3.111.2.802.1.1.27.1.2.1.4
.1.3.111.2.802.1.1.27.1.3
.1.3.111.2.802.1.1.27.1.3.1
Unsigned32
.1.3.111.2.802.1.1.27.1.3.1.1
.1.3.111.2.802.1.1.27.1.3.1.2
.1.3.111.2.802.1.1.27.1.3.1.3
.1.3.111.2.802.1.1.27.1.3.1.4
.1.3.111.2.802.1.1.27.1.3.1.5
.1.3.111.2.802.1.1.27.1.3.1.6
.1.3.111.2.802.1.1.27.1.4
.1.3.111.2.802.1.1.27.1.4.1
Enumeration
.1.3.111.2.802.1.1.27.1.4.1.1
.1.3.111.2.802.1.1.27.1.4.1.10
.1.3.111.2.802.1.1.27.1.4.1.11
.1.3.111.2.802.1.1.27.1.4.1.2
.1.3.111.2.802.1.1.27.1.4.1.3
.1.3.111.2.802.1.1.27.1.4.1.4
.1.3.111.2.802.1.1.27.1.4.1.5
minutesUnsigned32
.1.3.111.2.802.1.1.27.1.4.1.6
decisecondsUnsigned32
.1.3.111.2.802.1.1.27.1.4.1.7
Enumeration
.1.3.111.2.802.1.1.27.1.4.1.8
minutesUnsigned32
.1.3.111.2.802.1.1.27.1.4.1.9
.1.3.111.2.802.1.1.27.2
.1.3.111.2.802.1.1.27.2.1
.1.3.111.2.802.1.1.27.2.2
Dependencies (9) 5 direct · 4 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Compliance Statements (1)

OID .1.3.111.2.802.1.1.27.2.1.1
The compliance statement for support
of the TEIPS MIB module.
Required groups
mandatory ieee8021TeipsV2IpgGroup
mandatory ieee8021TeipsV2IpgTesiGroup
mandatory ieee8021TeipsV2IpgConfigManGroup
mandatory ieee8021TeipsV2NotificationsGroup
optional ieee8021TeipsV2IpgConfigOptGroup This group allows implmementation to
optionally change the WaitToRestore,
M:1 WaitToRestore, and HoldOff timers
for IPGs.
optional ieee8021TeipsV2CandidatePsGroup This group allows implmementation to
optionally list candidate Protection
Segments when M:1 IPS is deployed.
Object refinements
ObjectAccessSyntaxDescription
ieee8021TeipsV2IpgConfigWTR noaccess
This object is optional.
ieee8021TeipsV2IpgConfigHoldOff noaccess
This object is optional.
ieee8021TeipsV2IpgConfigMWTR noaccess
This object is optional.
ieee8021TeipsV2IpgRowStatus
active(1), notInService(2)
Support for createAndWait is not required.
ieee8021TeipsV2TesiRowStatus
active(1), notInService(2)
Support for createAndWait is not required.
Notifications / Traps (1)
NameOIDDescription
.1.3.111.2.802.1.1.27.0.1
An IPG generates this notification whenever
an adminisistrative command cannot be
executed by the IPS state machine. For
example, when a requested manual switch
cannot be performed because of a signal
failure condition.

The management entity receiving the
notification can identify
the system from the network source
address of the notification and can
identify the IPG by the indices of
the OID of the ieee8021TeipsV2IpgConfigState
variable in the notification:

ieee8021BridgeBaseComponentId - Identifies
the component on the Bridge where the
protection group is configured.

ieee8021TeipsV2Ipgid - The ID of the protection group.