ibmOsaExpATMClientIdentifier
IBM-OSA-MIB ·
.1.3.6.1.4.1.2.6.188.1.7.1.41
Object
column
Integer32
LE Client Identifier. Each LE Client requires a LE Client Identifier (LECID) assigned by the LE Server during the Join phase. The LECID is placed in control requests by the LE Client and MAY be used for echo suppression on multicast data frames sent by that LE Client. This value MUST NOT change without terminating the LE Client and returning to the Initial state. A valid LECID MUST be in the range X'0001' through X'FEFF'. The value of this object is only meaningful for a LEC that is connected to a LES. For a LEC which does not belong to an emulated LAN, the value of this object is defined to be 0. Corresponds to Initial State Parameter C14.
Context
- MIB
- IBM-OSA-MIB
- OID
.1.3.6.1.4.1.2.6.188.1.7.1.41- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ibmOSAExpATMPortEntry
- Table
- ibmOSAExpATMPortTable
- Siblings
- 75
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-65279
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ibmOsaExpATMPortNumber The logical port number of this port | column | Integer32 | .1.3.6.1.4.1.2.6.188.1.7.1.1 |
| ibmOsaExpATMPortName Name of the port as used by TCP/IP | column | OctetString | .1.3.6.1.4.1.2.6.188.1.7.1.12 |
| ibmOsaExpATMGroupMacAddrTable This field contains the active Group Addresses.
An individual Group Address is 6 bytes long with an
additional 2 bytes of padding. | column | OctetString | .1.3.6.1.4.1.2.6.188.1.7.1.13 |
| ibmOsaExpATMIBMEnhancedMode When set to Yes, this keeps data connections active
when the connection to the LES is lost. | column | Enumeration | .1.3.6.1.4.1.2.6.188.1.7.1.14 |
| ibmOsaExpATMBestEffortPeakRate Values range from 10-1550 and must be divided by 10 to
get the proper value. A value of 1550 indicates 155.0
Mbytes/sec | column | Megabytes per second SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2.6.188.1.7.1.15 |
| ibmOsaExpATMConfigMode Indicates whether this LAN Emulation Client should
auto-configure the next time it is (re)started. In
automatic (1) mode, a client uses a LAN Emulation
Configuration Server to lea… | column | Enumeration | .1.3.6.1.4.1.2.6.188.1.7.1.16 |
| ibmOsaExpATMConfigLanType The logical port type that the user configured the port for | column | Enumeration | .1.3.6.1.4.1.2.6.188.1.7.1.17 |
| ibmOsaExpATMActualLanType The actual logical port type the port is running in | column | Enumeration | .1.3.6.1.4.1.2.6.188.1.7.1.18 |
| ibmOsaExpATMConfigMaxDataFrmSz The maximum data frame size (in bytes) which this
client will use the next time it returns to the Initial
State. Auto-configuring clients use this parameter in
their configure req… | column | bytes Enumeration | .1.3.6.1.4.1.2.6.188.1.7.1.19 |
| ibmOsaExpATMPortType The logical port type. | column | Enumeration | .1.3.6.1.4.1.2.6.188.1.7.1.2 |
| ibmOsaExpATMActualMaxDataFrmSz The maximum data frame size (in bytes) which this
client will use the next time it returns to the Initial
State. Auto-configuring clients use this parameter in
their configure req… | column | Enumeration | .1.3.6.1.4.1.2.6.188.1.7.1.20 |
| ibmOsaExpATMConfigELANName The ELAN Name this client will use the
next time it returns to the Initial State.
Auto-configuring clients use this parameter in
their configure requests. Manually configured
clie… | column | OctetString | .1.3.6.1.4.1.2.6.188.1.7.1.21 |
| ibmOsaExpATMActualELANName The ELAN Name this client will use the
next time it returns to the Initial State.
Auto-configuring clients use this parameter in
their configure requests. Manually configured
clie… | column | OctetString | .1.3.6.1.4.1.2.6.188.1.7.1.22 |
| ibmOsaExpATMConfigLESATMAddress The LAN Emulation Server which this client will use the
next time it is started in manual configuration mode.
When ibmOsaExpATMConfigMode is 'automatic', there is no
need to set t… | column | OctetString | .1.3.6.1.4.1.2.6.188.1.7.1.23 |
| ibmOsaExpATMActualLESATMAddress The LAN Emulation Server which this client will use the
next time it is started in manual configuration mode.
When lecConfigMode is 'automatic', there is no need to set
this addre… | column | OctetString | .1.3.6.1.4.1.2.6.188.1.7.1.24 |
| ibmOsaExpATMControlTimeout Control Time-out. Time out period used for timing out most
request/response control frame interactions, as specified
elsewhere in the LAN Emulation specification.
This time value … | column | seconds Integer32 | .1.3.6.1.4.1.2.6.188.1.7.1.25 |
| ibmOsaExpATMMaxUnknownFrameCount Maximum Unknown Frame Count. See the description of
ibmOsaExpATMMaxUnknownFrameTime below. Corresponds to
Initial State Parameter C10. | column | Integer32 | .1.3.6.1.4.1.2.6.188.1.7.1.26 |
| ibmOsaExpATMMaxUnknownFrameTime Maximum Unknown Frame Time. Within the period of time
defined by the Maximum Unknown Frame Time, a LE Client
will send no more than Maximum Unknown Frame Count
frames to the BUS f… | column | Integer32 | .1.3.6.1.4.1.2.6.188.1.7.1.27 |
| ibmOsaExpATMVCCTimeoutPeriod VCC Time-out Period. A LE Client SHOULD release any
Data Direct VCC that it has not used to transmit
or receive any data frames for the length of the VCC
Time-out Period. This par… | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2.6.188.1.7.1.28 |
| ibmOsaExpATMMaxRetryCount Maximum Retry Count. A LE CLient MUST not retry a
LE_ARP_REQUEST for a given frame's LAN destination
more than Maximum Retry Count times, after the first
LE_ARP_REQUEST for that s… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2.6.188.1.7.1.29 |
| ibmOsaExpATMLanTrafficState The LAN state value ranges from 0 to 8. A value of 5,
disabled is further explained in object
ibmOsaExpATMDisabledStatus. | column | Enumeration | .1.3.6.1.4.1.2.6.188.1.7.1.3 |
| ibmOsaExpATMAgingTime Aging Time. The maximum time that a LE Client will
maintain an entry in its LE_ARP cache in the absence
of a verification of that relationship.
This time value is expressed in sec… | column | seconds Integer32 | .1.3.6.1.4.1.2.6.188.1.7.1.30 |
| ibmOsaExpATMForwardDelayTime Forward Delay Time. The maximum time that a LE Client
will maintain an entry for a non-local MAC address in
its LE_ARP cache in the absence of a verification of
that relationship,… | column | seconds Integer32 | .1.3.6.1.4.1.2.6.188.1.7.1.31 |
| ibmOsaExpATMExpectedARPRespTime Expected LE_ARP Reponse Time. The maximum time that
the LEC expects an LE_ARP_REQUEST/LE_ARP_RESPONSE
cycle to take. Used for retries and verifies. This
time value is expressed in… | column | seconds Integer32 | .1.3.6.1.4.1.2.6.188.1.7.1.32 |
| ibmOsaExpATMFlushTimeout Flush Time-out. Time limit to wait to receive a
LE_FLUSH_RESPONSE after the LE_FLUSH_REQUEST has been
sent before taking recovery action. This time value
is expressed in seconds. … | column | seconds Integer32 | .1.3.6.1.4.1.2.6.188.1.7.1.33 |
| ibmOsaExpATMPathSwitchingDelay Path Switching Delay. The time since sending a
frame to the BUS after which the LE Client may
assume that the frame has been either discarded
or delivered to the recipient. May be… | column | seconds Integer32 | .1.3.6.1.4.1.2.6.188.1.7.1.34 |
| ibmOsaExpATMLocalSegmentID Local Segment ID. The segment ID of the emulated LAN.
This is only required for IEEE 802.5 clients that
are Source Routing bridges. Corresponds to Initial
State Parameter C23. | column | Integer32 | .1.3.6.1.4.1.2.6.188.1.7.1.35 |
| ibmOsaExpATMMltcstSendVCCType Multicast Send VCC Type. Signalling parameter that
SHOULD be used by the LE Client when establishing
the Multicast Send VCC. This is the method to be used
by the LE Client when sp… | column | Enumeration | .1.3.6.1.4.1.2.6.188.1.7.1.36 |
| ibmOsaExpATMMltcstSendVCCAvgRate Multicast Send VCC AvgRate. Signalling parameter
that SHOULD be used by the LE Client when estabishing
the Multicast Send VCC. Forward and Backward Sustained
Cell Rate to be reque… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2.6.188.1.7.1.37 |
| ibmOsaExpATMMcastSendVCCPeakRate Multicast Send VCC PeakRate. Signalling parameter that
SHOULD be used by the LE Client when establishing the
Multicast Send VCC. Forward and Backward Peak Cell
Rate to be requeste… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2.6.188.1.7.1.38 |
| ibmOsaExpATMConnectCompleteTimer Connection Complete Timer. Optional. In Connection
Establish ment this is the time period in which
data or a READY_IND message is expected from a Calling
Party. This time value is… | column | seconds Integer32 | .1.3.6.1.4.1.2.6.188.1.7.1.39 |
| ibmOsaExpATMServiceMode This object indicates if the processor is in service mode
or not. | column | Enumeration | .1.3.6.1.4.1.2.6.188.1.7.1.4 |
| ibmOsaExpATMClientATMAddress LE Client's ATM Addresses. The primary ATM address
of this LAN Emulation Client. This address is used
to establish the Control Direct and Multicast Send
VCCs, and may also be used… | column | OctetString | .1.3.6.1.4.1.2.6.188.1.7.1.40 |
| ibmOsaExpATMClientCurrentState The current state of the LAN Emulation Client. Note
that 'ifOperStatus' is defined to be 'up' when, and
only when, this field is 'operational'. | column | Enumeration | .1.3.6.1.4.1.2.6.188.1.7.1.42 |
| ibmOsaExpATMLastFailureRespCode Status code from the last failed Configure response
or Join response. Failed responses are those for which
the LE_CONFIGURE_RESPONSE / LE_JOIN_RESPONSE frame
contains a non-zero c… | column | Enumeration | .1.3.6.1.4.1.2.6.188.1.7.1.43 |
| ibmOsaExpATMLastFailureState The state this client was in when it updated the
'ibmOsaExpATMLastFailureRespCode'.
If 'ibmOsaExpATMLastFailureRespCode'
is 'none', this object has the value initialState(1). | column | Enumeration | .1.3.6.1.4.1.2.6.188.1.7.1.44 |
| ibmOsaExpATMProtocol The LAN Emulation protocol which this client supports,
and specifies in its LE_JOIN_REQUESTs. | column | Integer32 | .1.3.6.1.4.1.2.6.188.1.7.1.45 |
| ibmOsaExpATMLeVersion The LAN Emulation protocol version which this client
supports, and specifies in its LE_JOIN_REQUESTs. | column | Integer32 | .1.3.6.1.4.1.2.6.188.1.7.1.46 |
| ibmOsaExpATMTopologyChange Topology Change. Boolean indication that the LE Client
is using the Forward Delay Time C18, instead of the
Aging Time C17, to age non-local entries in its LE_ARP
cache C16. For a … | column | Enumeration | .1.3.6.1.4.1.2.6.188.1.7.1.47 |
| ibmOsaExpATMConfigServerATMAddr The ATM address of the LAN Emulation Configuration
Server (if known) or 0 (otherwise). In LAN
Emulation MIB, the OCTET STRING is either 0 length
or 20 octets.
For O… | column | OctetString | .1.3.6.1.4.1.2.6.188.1.7.1.48 |
| ibmOsaExpATMConfigSource Indicates whether this LAN Emulation Client used the
LAN Emulation Configuration Server, and, if so, what
method it used to establish the Configuration Direct VCC | column | Enumeration | .1.3.6.1.4.1.2.6.188.1.7.1.49 |
| ibmOsaExpATMDisabledStatus When the value of ibmOsaExpATMLanTrafficState is NOT
disabled, the value of this object will be zero.
When the value of ibmOsaExpATMLanTrafficState is
disabled(5), … | column | Bits | .1.3.6.1.4.1.2.6.188.1.7.1.5 |
| ibmOsaExpATMProxyClient Indicates whether this client is acting as a proxy.
Proxy clients are allowed to represent unregistered
MAC addresses, and receive copies of LE_ARP_REQUEST
frames for such address… | column | Enumeration | .1.3.6.1.4.1.2.6.188.1.7.1.50 |
| ibmOsaExpATMLePDUOctetsInbound The number of Le PDU Octets received | column | octets SNMPv2-SMICounter64 | .1.3.6.1.4.1.2.6.188.1.7.1.51 |
| ibmOsaExpATMNonErrLePDUDiscIn The number of Non Error Le PDU Octets received | column | octets SNMPv2-SMICounter32 | .1.3.6.1.4.1.2.6.188.1.7.1.52 |
| ibmOsaExpATMErrLePDUDiscIn The number of Errored Le PDU Discards received | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2.6.188.1.7.1.53 |
| ibmOsaExpATMLePDUOctetsOutbound The number of Le PDU Discards sent | column | octets SNMPv2-SMICounter64 | .1.3.6.1.4.1.2.6.188.1.7.1.54 |
| ibmOsaExpATMNonErrLePDUDiscOut The number of Non Error Le PDU Discards sent | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2.6.188.1.7.1.55 |
| ibmOsaExpATMErrLePDUDiscOut The number of Errored Le PDU Discards sent | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2.6.188.1.7.1.56 |
| ibmOsaExpATMLeARPRequestsOut The number of LE ARP Requests sent | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2.6.188.1.7.1.57 |
| ibmOsaExpATMLeARPRequestsIn The number of LE ARP Requests received over the LUNI
by this LAN Emulation Client. Requests may arrive
on the Control Direct VCC or on the Control Distribute
VCC, depending upon h… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2.6.188.1.7.1.58 |
| ibmOsaExpATMLeARPRepliesOut The number of LE ARP Responses sent over the LUNI
by this LAN Emulation Client. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2.6.188.1.7.1.59 |
| ibmOsaExpATMConfigName This is the name of the configuration that is on the OSA.
It is set using OSA/SF. It is not used by OSA | column | OctetString | .1.3.6.1.4.1.2.6.188.1.7.1.6 |
| ibmOsaExpATMLeARPRepliesIn The number of LE ARP Responses received over the
LUNI by this LAN Emulation Client. This count includes
all such replies, whether solicited or not. Replies
may arrive on the Contr… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2.6.188.1.7.1.60 |
| ibmOsaExpATMControlFramesOut The total number of control packets sent by this
LAN Emulation Client over the LUNI. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.2.6.188.1.7.1.61 |
| ibmOsaExpATMControlFramesIn The total number of control packets received by this
LAN Emulation Client over the LUNI. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.2.6.188.1.7.1.62 |
| ibmOsaExpATMSVCFailures The total number of outgoing LAN Emulation SVCs
which this client tried, but failed, to open;
incoming LAN Emulation SVCs which this client tried,
but failed to establish; and inc… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2.6.188.1.7.1.63 |
| ibmOsaExpATMConfigDirectIntfc The interface associated with the Configuration
Direct VCC. If no Configuration Direct VCC exists,
this object has the value 0. Otherwise, the objects
( ibmOsaExpATMConfigDirectIn… | column | Integer32 | .1.3.6.1.4.1.2.6.188.1.7.1.64 |
| ibmOsaExpATMConfigDirectVPI If the Configuration Direct VCC exists, this object
contains the VPI which identifies that VCC at the
point where it connects to this LE client.
Otherwise, this object has the val… | column | Integer32 | .1.3.6.1.4.1.2.6.188.1.7.1.65 |
| ibmOsaExpATMConfigDirectVCI If the Configuration Direct VCC exists, this
object contains the VCI which identifies that
VCC at the point where it connects to this LE
client. Otherwise, this object has the val… | column | Integer32 | .1.3.6.1.4.1.2.6.188.1.7.1.66 |
| ibmOsaExpATMControlDirectIntfc The interface associated with the Control Direct
VCC. If no Control Direct VCC exists, this object
has the value 0. Otherwise, the objects
( ibmOsaExpATMConfigDirectIntfc,
i… | column | Integer32 | .1.3.6.1.4.1.2.6.188.1.7.1.67 |
| ibmOsaExpATMControlDirectVPI If the Control Direct VCC exists, this object
contains the VPI which identifies that VCC at
the point where it connects to this LE client.
Otherwise, this object has the value 0. | column | Integer32 | .1.3.6.1.4.1.2.6.188.1.7.1.68 |
| ibmOsaExpATMControlDirectVCI If the Control Direct VCC exists, this object
contains the VCI which identifies that VCC at
the point where it connects to this LE client.
Otherwise, this object has the value 0. | column | Integer32 | .1.3.6.1.4.1.2.6.188.1.7.1.69 |
| ibmOsaExpATMMacAddrActive A 6 byte OCTET STRING which contains the current
MAC address in use on the OSA.
The values are in canonical format. | column | OctetString | .1.3.6.1.4.1.2.6.188.1.7.1.7 |
| ibmOsaExpATMControlDistIntfc The interface associated with the Control Distribute
VCC. If no Control Distribute VCC has been set up to
this client, this object has the value 0. Otherwise,
the objects ( ibmOsa… | column | Integer32 | .1.3.6.1.4.1.2.6.188.1.7.1.70 |
| ibmOsaExpATMControlDistributeVPI If the Control Distribute VCC exists, this object
contains the VPI which identifies that VCC at the
point where it connects to this LE client.
Otherwise, this object has the value… | column | Integer32 | .1.3.6.1.4.1.2.6.188.1.7.1.71 |
| ibmOsaExpATMControlDistributeVCI If the Control Distribute VCC exists, this object
contains the VCI which identifies that VCC at the
point where it connects to this LE client.
Otherwise, this object contains the … | column | Integer32 | .1.3.6.1.4.1.2.6.188.1.7.1.72 |
| ibmOsaExpATMMulticastSendIntfc The interface associated with the Multicast Send
VCC. If no Multicast Send VCC exists, this object
has the value 0. Otherwise, the objects
( ibmOsaExpATMMulticastSendIntfc,
ibmO… | column | Integer32 | .1.3.6.1.4.1.2.6.188.1.7.1.73 |
| ibmOsaExpATMMulticastSendVPI If the Multicast Send VCC exists, this object
contains the VPI which identifies that VCC at
the point where it connects to this LE client.
Otherwise, this object has the value 0. | column | Integer32 | .1.3.6.1.4.1.2.6.188.1.7.1.74 |
| ibmOsaExpATMMulticastSendVCI If the Multicast Send VCC exists, this object
contains the VCI which identifies that VCC at
the point where it connects to this LE client.
Otherwise, this object has the value 0. | column | Integer32 | .1.3.6.1.4.1.2.6.188.1.7.1.75 |
| ibmOsaExpATMMulticastFwdIntfc The interface associated with the Multicast
Forward VCC. If no Multicast Forward VCC has
been set up to this client, this object has the
value 0. Otherwise, the objects
( ibmOsaEx… | column | Integer32 | .1.3.6.1.4.1.2.6.188.1.7.1.76 |
| ibmOsaExpATMMulticastForwardVPI If the Multicast Forward VCC exists, this object
contains the VPI which identifies that VCC at the
point where it connects to this LE client.
Otherwise, this object has the value … | column | Integer32 | .1.3.6.1.4.1.2.6.188.1.7.1.77 |
| ibmOsaExpATMMulticastForwardVCI If the Multicast Forward VCC exists, this object
contains the VCI which identifies that VCC at the
point where it connects to this LE client.
Otherwise, this object has the value … | column | Integer32 | .1.3.6.1.4.1.2.6.188.1.7.1.78 |
| ibmOsaExpATMMacAddrBurntIn A 6 byte OCTET STRING which contains the burned in
MAC address on the OSA.
The values are in canonical format. | column | OctetString | .1.3.6.1.4.1.2.6.188.1.7.1.8 |
| ibmOsaExpATMUserData Data set by the user. It is ignored by the OSA. | column | OctetString | .1.3.6.1.4.1.2.6.188.1.7.1.9 |