portModuleCableType
IBM-BCCUSTOM-MIB ·
.1.3.6.1.4.1.2.6.215.2.1.1.1.16
Object
column
OctetString
A string that designates the external cable type for this port. The name cannot exceed 64 octets. For example, Active Copper, Passive Copper, Active Fibre, Passive Fibre.
Context
- MIB
- IBM-BCCUSTOM-MIB
- OID
.1.3.6.1.4.1.2.6.215.2.1.1.1.16- Type
- column
- Access
- readonly
- Status
- current
- Parent
- portInformationEntry
- Table
- portInformationTable
- Siblings
- 17
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-128
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| portModuleIndex I/O Module port sequence index. | column | Integer32 | .1.3.6.1.4.1.2.6.215.2.1.1.1.1 |
| portModuleReal To map from relative port index based on port type to the real port index of the
server. | column | Integer32 | .1.3.6.1.4.1.2.6.215.2.1.1.1.10 |
| portModuleRelative To map from real port index to the relative port index of the server. | column | Integer32 | .1.3.6.1.4.1.2.6.215.2.1.1.1.11 |
| portModuleLaneCount The value represents the number of lanes supported by the port. | column | Enumeration | .1.3.6.1.4.1.2.6.215.2.1.1.1.12 |
| portModuleCableLength The length (in meters) of the cable supported by this port. | column | Integer32 | .1.3.6.1.4.1.2.6.215.2.1.1.1.13 |
| portModuleCableManufacturer A string that contains the cable manufacturer. The name cannot exceed 64 1028 octets. | column | OctetString | .1.3.6.1.4.1.2.6.215.2.1.1.1.14 |
| portModuleCableCompatiblity Indicates the compatibility of the external cable which is currently plugged into
this port. | column | Enumeration | .1.3.6.1.4.1.2.6.215.2.1.1.1.15 |
| portModuleDataRate The value represents the data rate supported for this port. SDR (single data
rate), DDR (double data rate), QDR (quad data rate), EDR (enhanced data rate),
FDR (fourteen data rat… | column | Enumeration | .1.3.6.1.4.1.2.6.215.2.1.1.1.17 |
| portModuleLicensedState The value represents the port license state. If this port is a base port that does
not require a license key then the state will always indicate notApplicable. If the
port needs t… | column | Enumeration | .1.3.6.1.4.1.2.6.215.2.1.1.1.18 |
| portModuleType Indicates the given port type of the I/O Module. The definitions of port types are:
unUsed: the value of zero indicates the request is for a real port index of the IOM
in the OID.… | column | Enumeration | .1.3.6.1.4.1.2.6.215.2.1.1.1.2 |
| portModuleLinkState The current port link state of the I/O Module.
down: the physical port is down or off.
up: the physical port 817 is up and active
initialized: the physical port has completed init… | column | Enumeration | .1.3.6.1.4.1.2.6.215.2.1.1.1.3 |
| portModuleLabel The port string label of the I/O module. The IOM may allow for the port label to
be configured from the I/O Modules user interface but the default port label must
reflect.port typ… | column | OctetString | .1.3.6.1.4.1.2.6.215.2.1.1.1.4 |
| portModuleSpeed The INTEGER value will indicate the current speed of the port.
The INTEGER values are defined as follows: A signed value is Half duplex, A unsigned value is FULL
Duplex. The value… | column | Enumeration | .1.3.6.1.4.1.2.6.215.2.1.1.1.5 |
| portModuleMedia The port media type of the I/O Module. | column | Enumeration | .1.3.6.1.4.1.2.6.215.2.1.1.1.6 |
| portModuleProtocol The port protocol of the I/O Module. | column | Enumeration | .1.3.6.1.4.1.2.6.215.2.1.1.1.7 |
| portModuleTotal This value must return the the total number of ports supported on the IOM. This
value must be customized | column | Integer32 | .1.3.6.1.4.1.2.6.215.2.1.1.1.8 |
| portModuleSpeedList The string contains all the available speed settings that is applicable to the port.
It is a special format so the application can parse the string to obtain all the
possible spee… | column | OctetString | .1.3.6.1.4.1.2.6.215.2.1.1.1.9 |