IBM-BCCUSTOM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
4
Rows
4
Columns
29
.1.3.6.1.4.1.2.6.215.2.1.1 · 1 row entry · 18 columns
Table that contains port information for the I/O Module.
portInformationEntry entry .1.3.6.1.4.1.2.6.215.2.1.1.1
I/O Module port entry
Indexes
portModuleIndex portModuleType
Column Syntax OID
portModuleIndex
I/O Module port sequence index.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.2.6.215.2.1.1.1.1
portModuleType
Indicates the given port type of the I/O Module. The definitions of port types are:
unUsed: the value of zero indicates the request is for a real port index of the IOM
in the OID. In the port type GET operation, the ret…
Enumeration
Enumerated Values:
0unUsed
1externalPort
2externalManagementPort
3externalDualPort
4bladePort
5mmManagementPort
6uplinkPort
7interModulePort
8interModuleManagementPort
9interModuleDualPort
10interModuleExternalBridgePort
11interModuleInternalBridgePort
.1.3.6.1.4.1.2.6.215.2.1.1.1.2
portModuleLinkState
The current port link state of the I/O Module.
down: the physical port is down or off.
up: the physical port 817 is up and active
initialized: the physical port has completed initializion but is not active yet.
Enumerationr/w
Enumerated Values:
0down
1up
2initialized
.1.3.6.1.4.1.2.6.215.2.1.1.1.3
portModuleLabel
The port string label of the I/O module. The IOM may allow for the port label to
be configured from the I/O Modules user interface but the default port label must
reflect.port type description as defined below:
Unu…
OctetStringr/w
Constraints:
range: 0-128
.1.3.6.1.4.1.2.6.215.2.1.1.1.4
portModuleSpeed
The INTEGER value will indicate the current speed of the port.
The INTEGER values are defined as follows: A signed value is Half duplex, A unsigned value is FULL
Duplex. The value is the speed in multiple of 100 Mbps. T…
Enumerationr/w
Enumerated Values:
0autoduplex
1hundred-Mbpsfullduplex
10one-Gbpsfullduplex
20two-Gbpsfullduplex
40four-Gbpsfullduplex
60six-Gbpsfullduplex
80eight-Gbpsfullduplex
100ten-Gbpsfullduplex
140fourteen-Gbpsfullduplex
160sixteen-Gbpsfullduplex
200twenty-Gbpsfullduplex
400fourty-Gbpsfullduplex
560fivtysix-Gbpsfullduplex
600sixty-Gbpsfullduplex
800eighty-Gbpsfullduplex
1000hundred-Gbpsfullduplex
1120hundredandtwelve-Gbpsfullduplex
1680hundredandsixtyeight-Gbpsfullduplex
.1.3.6.1.4.1.2.6.215.2.1.1.1.5
portModuleMedia
The port media type of the I/O Module.
Enumeration
Enumerated Values:
0copper
1serdes
32opticalShortHaul
40opticalInterHaul
48opticalLongHaul
255other
.1.3.6.1.4.1.2.6.215.2.1.1.1.6
portModuleProtocol
The port protocol of the I/O Module.
Enumeration
Enumerated Values:
16ethernet
32fibreChannel
48scalability
64infiniband
80pciExpress
112myrinet
120serial
.1.3.6.1.4.1.2.6.215.2.1.1.1.7
portModuleTotal
This value must return the the total number of ports supported on the IOM. This
value must be customized
Note: When an IOM supports the ability to activate additional ports supported by the
IOM hardware by installing a…
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.2.6.215.2.1.1.1.8
portModuleSpeedList
The string contains all the available speed settings that is applicable to the port.
It is a special format so the application can parse the string to obtain all the
possible speed settings. The speeds supported are def…
OctetString
Constraints:
range: 0-128
.1.3.6.1.4.1.2.6.215.2.1.1.1.9
portModuleReal
To map from relative port index based on port type to the real port index of the
server.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.2.6.215.2.1.1.1.10
portModuleRelative
To map from real port index to the relative port index of the server.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.2.6.215.2.1.1.1.11
portModuleLaneCount
The value represents the number of lanes supported by the port.
Enumeration
Enumerated Values:
1onex
2twox
4fourx
8eightx
12twelvex
16sixteenx
.1.3.6.1.4.1.2.6.215.2.1.1.1.12
portModuleCableLength
The length (in meters) of the cable supported by this port.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.2.6.215.2.1.1.1.13
portModuleCableManufacturer
A string that contains the cable manufacturer. The name cannot exceed 64 1028 octets.
OctetString
Constraints:
range: 0-128
.1.3.6.1.4.1.2.6.215.2.1.1.1.14
portModuleCableCompatiblity
Indicates the compatibility of the external cable which is currently plugged into
this port.
Enumeration
Enumerated Values:
0incompatible
1compatible
2compatibleButNotRecommnded
.1.3.6.1.4.1.2.6.215.2.1.1.1.15
portModuleCableType
A string that designates the external cable type for this port. The name cannot
exceed 64 octets. For example, Active Copper, Passive Copper, Active Fibre,
Passive Fibre.
OctetString
Constraints:
range: 0-128
.1.3.6.1.4.1.2.6.215.2.1.1.1.16
portModuleDataRate
The value represents the data rate supported for this port. SDR (single data
rate), DDR (double data rate), QDR (quad data rate), EDR (enhanced data rate),
FDR (fourteen data rate).
Enumeration
Enumerated Values:
0sdr
1ddr
2qdr
3edr
4fdr
.1.3.6.1.4.1.2.6.215.2.1.1.1.17
portModuleLicensedState
The value represents the port license state. If this port is a base port that does
not require a license key then the state will always indicate notApplicable. If the
port needs to be enabled by a license key then the s…
Enumeration
Enumerated Values:
0notApplicable
1notLicensed
2licensed
.1.3.6.1.4.1.2.6.215.2.1.1.1.18
.1.3.6.1.4.1.2.6.215.3.1.1 · 1 row entry · 5 columns
Table of Firmware Image information.
fwInformationEntry entry .1.3.6.1.4.1.2.6.215.3.1.1.1
I/O Module Firmware Image entry
Indexes
fwImageIndex
Column Syntax OID
fwImageIndex
Firmware Image index.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.2.6.215.3.1.1.1.1
fwImageInformation
Information about the image - This string must follow the format below:
Version: %s\n, Rel-Date: %s\n, Status: %s\n, Type: %s\n, Size: %s\n, Other-Info: %s\n\

Version: The version of the image and should …
OctetString
Constraints:
range: 0-1024
.1.3.6.1.4.1.2.6.215.3.1.1.1.2
fwImageFileLocation
This object indicates whether the IOM implementation of firmware updates has
requirements on the server that would prevent the MM acting as the server for
the image file(s). If there are no unique requirements then mmIs…
Enumeration
Enumerated Values:
0mmServer
1externalServerRequired
.1.3.6.1.4.1.2.6.215.3.1.1.1.3
fwImageProtocols
The CMM will use this command to read the current supported and enabled IOM file transfer protocols. The bit mask is treated as 32 bits in network byte order. 1310 That is the bit 0 will be the left most bit and bit…
OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.2.6.215.3.1.1.1.4
fwImageIsUpdateable
This object indicates whether the firmware image index can be updated
separately using one of the indicated file transfer mechanisms from
'fwImageProtocol'. If this specific image cannot be updated then IOM must return
Enumeration
Enumerated Values:
0updateable
1notupdateable
.1.3.6.1.4.1.2.6.215.3.1.1.1.5
.1.3.6.1.4.1.2.6.215.4.1.1 · 1 row entry · 3 columns
Table of System File information.
systemFileInformationEntry entry .1.3.6.1.4.1.2.6.215.4.1.1.1
I/O Module System File entry
Indexes
systemFileIndex
Column Syntax OID
systemFileIndex
System File index.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.2.6.215.4.1.1.1.1
systemFileInformation
Information about the system file(s) that are supported by the IOM, on which the
CMM can perform a get or put operation from/to the IOM. Two types of files are
mandatory for the IOM, service file and configuration file.…
OctetString
Constraints:
range: 0-128
.1.3.6.1.4.1.2.6.215.4.1.1.1.2
systemFileInformationProtocols
The CMM will use this command to read the current supported and enabled IOM file transfer protocols. The bit mask is treated as 32 bits in network byte order. That is the bit 0 will be the left most bit and bit 31 …
OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.2.6.215.4.1.1.1.3
.1.3.6.1.4.1.2.6.215.7.1 · 1 row entry · 3 columns
Table of License key information.
licenseKeyInformationEntry entry .1.3.6.1.4.1.2.6.215.7.1.1
License Key entry
Indexes
licenseKeyIndex
Column Syntax OID
licenseKeyIndex
License Key index.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.2.6.215.7.1.1.1
licenseKeyDescStringInformation
Information about the system file - This string must follow the format below:
Description: %s\n, Date-Time: %s\n, License-ID: %s\n, Other-Info: %s\n\0

Description: Description of the license key feature, …
OctetString
Constraints:
range: 0-1024
.1.3.6.1.4.1.2.6.215.7.1.1.2
licenseKeyCurrentState
Provides information on the current state of the license
Enumeration
Enumerated Values:
0unknown
1valid
2notValid
3expired
4usageExceeded
.1.3.6.1.4.1.2.6.215.7.1.1.3