iomSnmpv3UserState
IBM-BCCUSTOM-MIB ·
.1.3.6.1.4.1.2.6.215.6.1.9
Object
scalar
r/w
Enumeration
Indicates the state of the user: Enabled or Disabled.
The sequence of creating and enabling a user account or changing various OID<92>s
of the SNMPv3 user account will be as follows:
(1) Set the <91>iomSnmpv3UserState<92> to disabled.
(2) Configure all the appropriate v3 user account information and trap address objects.
(3) Set the <91>snmpv3UserState<92> to enabled. When the IOM receives a set to enable, the IOM is
responsible to validate that all the SNMPv3 user objects are valid to create a functioning v3 user
account. If they are not then the response to this set should fail as described in (4).
(4) If all objects have been set correctly the response to this object will be
<91>success<92> otherwise the response will indicate failure. Note: enforcing disabling
then enabling the user account will ensure no partial account will be configured in
the IOM SNMP agent.
Context
- MIB
- IBM-BCCUSTOM-MIB
- OID
.1.3.6.1.4.1.2.6.215.6.1.9- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- iomSnmpv3Cfg
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | disabled |
1 | enabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| iomSnmpv3UserName String that contains the SNMPv3 userid. Note: this IOM<92>s SNMPv3 user account
configuration must not be allowed to be altered from any of the IOM UI<92>s. | scalar | OctetString | .1.3.6.1.4.1.2.6.215.6.1.1 |
| iomSnmpv3UserStateStatusString This object will be a bit string that contains detailed information about the
SNMPv3 user account status. The intent is that the information string will be
passed to the external … | scalar | OctetString | .1.3.6.1.4.1.2.6.215.6.1.10 |
| iomSnmpv3TestTrap This object provides a mechanism to generate a <91>test trap<92>. A set of this object will only
generate a <91>test trap<92> from the IOM If a valid SNMPv3 user account has been … | scalar | Enumeration | .1.3.6.1.4.1.2.6.215.6.1.11 |
| iomSnmpv3tResetUser This object provides a method to reset all the other objects that make up the SNMPv3 user
account back to default values. This may be used for security reasons by the MM in order… | scalar | Enumeration | .1.3.6.1.4.1.2.6.215.6.1.12 |
| iomSnmpv3UserAuthProtocol SNMPv3 - Authentication Protocol supported by the user. The only allowed
protocol is <91>SHA<92>. | scalar | Enumeration | .1.3.6.1.4.1.2.6.215.6.1.2 |
| iomSnmpv3UserAuthPassword SNMPv3 User - Authentication password string. Notes: (1) The MM does not
validate the contents of the password against any password security rules, the IOM
is responsible for vali… | scalar | OctetString | .1.3.6.1.4.1.2.6.215.6.1.3 |
| iomSnmpv3UserPrivacyProtocol SNMPv3 - Privacy Protocol supported by the user. The only allowed protocol is
<91>AES<92>. | scalar | Enumeration | .1.3.6.1.4.1.2.6.215.6.1.4 |
| iomSnmpv3UserPrivacyPassword SNMPv3 User - Privacy password string. Notes: (1) The MM does not validate the
contents of the password against any password security rules, the IOM is
responsible for validation … | scalar | OctetString | .1.3.6.1.4.1.2.6.215.6.1.5 |
| iomSnmpv3UserAccessType SNMPv3 User Access level (Get, Set, and Traps) of the user. | scalar | Enumeration | .1.3.6.1.4.1.2.6.215.6.1.6 |
| iomSnmpv3UserIPv6TrapAddress Trap destination IPv6 address. Note: This address represents the address that will
be used by an external application for receiving SNMPv3 traps directly from the
IOM<92>s SNMPv3 … | scalar | OctetString | .1.3.6.1.4.1.2.6.215.6.1.7 |
| iomSnmpv3UserIPv4TrapAddress Trap destination IP4 address. Note: This address represents the address that will
be used by an external application for receiving SNMPv3 traps directly from the
IOM<92>s SNMPv3 a… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2.6.215.6.1.8 |