hwVOPUPBOConfProfPsdBUs1

HUAWEI-VOP-MIB · .1.3.6.1.4.1.2011.6.144.1.1.8.1.8
Commands MIB view Table view

Object

column r/w 0.01 dBm/HzInteger32 
This configuration parameter defines the 'b' reference parameter of the UPBO reference PSD
used to compute the upstream power back-off for the upstream band US1.
A UPBOPSD defined for each band shall consist of two parameters [a, b].
Parameter 'a' ranges from 40 dBm/Hz (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz;
and parameter 'b' ranges from 0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz.
The UPBO reference PSD at the frequency 'f' expressed in MHz shall be equal to '-a-b(SQRT(f))'.
Setting hwVOPUPBOConfProfPsdAUs1 to 4000 and hwVOPUPBOConfProfPsdBUs1 to 0 is a special
configuration to disable UPBO in the respective upstream band.
Unit: 0.01 dBm/Hz.

Context

MIB
HUAWEI-VOP-MIB
OID
.1.3.6.1.4.1.2011.6.144.1.1.8.1.8
Type
column
Access
readwrite
Status
current
Units
0.01 dBm/Hz
Parent
hwVOPUPBOConfProfEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-VOP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOP-MIB::hwVOPUPBOConfProfPsdBUs1'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'HUAWEI-VOP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-VOP-MIB::hwVOPUPBOConfProfPsdBUs1.<hwVOPUPBOConfProfIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'HUAWEI-VOP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HUAWEI-VOP-MIB::hwVOPUPBOConfProfPsdBUs1'

Syntax

0.01 dBm/HzInteger32

Values & Constraints

Object Constraints
range: 0-4095