HUAWEI-VOP-MIB Table View

The table hwVOPDataRateConfProfTable contains data rate configuration parameters
for the DSL channel(s).
Entries in this table MUST be maintained in a persistent manner.
          
Two default profiles with index numbers 1 and 2 will always exist and its parameters
will be set to vendor-specific values, unless otherwise specified in this document
The index of this table is hwVOPDataRateConfProfIndex.

hwVOPDataRateConfProfEntry row .1.3.6.1.4.1.2011.6.144.1.1.2.1

The table hwVOPDataRateConfProfTable contains data rate configuration parameters
for the DSL channel(s).
Entries in this table MUST be maintained in a persistent manner.

Two default profiles with index numb…

Indexes

hwVOPDataRateConfProfIndex

Column	Syntax	OID
hwVOPDataRateConfProfIndex The hwVOPDataRateConfProfIndex identifies a row in the hwVOPDataRateConfProfTable.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2011.6.144.1.1.2.1.1
hwVOPDataRateConfProfRowStatus The hwVOPDataRateConfProfRowStatus is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. Before a profile can be deleted or taken ou…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.144.1.1.2.1.2
hwVOPDataRateConfProfDescription The hwVOPDataRateConfProfDescription contains an optional human readable description for the profile.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.2011.6.144.1.1.2.1.3
hwVOPDataRateConfProfMinDataRate If retransmission is not used in a given transmit direction,this parameter specifics minimum data rate for the bearer channel. The rate is coded in steps of 1000 bit/s.	bit/sUnsigned32r/w Constraints: range: 32000-500000000	.1.3.6.1.4.1.2011.6.144.1.1.2.1.4
hwVOPDataRateConfProfMinResDataRate The minimum reserved net data rate for the bearer channel, coded in bit/s. This parameter is only used if the Rate Adaptation Mode in the direction of the bearer channel (i.e., xdsl2LConfProfRaModeDs) is set to dynamicR…	bit/sUnsigned32r/w Constraints: range: 32000-500000000	.1.3.6.1.4.1.2011.6.144.1.1.2.1.5
hwVOPDataRateConfProfMaxDataRate If retransmission is not used in a given transmit direction,this parameter specifics maximum data rate for the bearer channel. The rate is coded in steps of 1000 bit/s.	bit/sUnsigned32r/w Constraints: range: 32000-500000000	.1.3.6.1.4.1.2011.6.144.1.1.2.1.6
hwVOPDataRateConfProfMinDataRateLowPwr This parameter specifies the minimum net data rate for the bearer channel as desired by the operator of the system during the low power state (L1/L2). The power management low power states L1 and L2 are defined in ITU-T…	bit/sUnsigned32r/w Constraints: range: 32000-500000000	.1.3.6.1.4.1.2011.6.144.1.1.2.1.7
hwVOPDataRateConfProfMaxBer Maximum Bit Error Ratio of the bearer channel.	Xdsl2MaxBerr/w Type Values: 1 eminus3 2 eminus5 3 eminus7	.1.3.6.1.4.1.2011.6.144.1.1.2.1.8
hwVOPDataRateConfProfUsDataRate If retransmission is not used in a given transmit direction, This parameter is a threshold on the net data rate upshift achieved over one or more bearer channel data rate adaptations. An upshift rate change alarm (eve…	bit/sUnsigned32r/w Constraints: range: 0-500000000	.1.3.6.1.4.1.2011.6.144.1.1.2.1.9
hwVOPDataRateConfProfDsDataRate If retransmission is not used in a given transmit direction, This parameter is a threshold on the net data rate downshift achieved over one or more bearer channel data rate adaptations. A downshift rate change alarm (…	bit/sUnsigned32r/w Constraints: range: 0-500000000	.1.3.6.1.4.1.2011.6.144.1.1.2.1.10
hwVOPDataRateConfProfDataPathMode The channel data path mode.	Xdsl2DataPathModer/w Type Values: 1 atm 2 ptm 3 both	.1.3.6.1.4.1.2011.6.144.1.1.2.1.11
hwVOPDataRateConfProfMinEtrRtx If retransmission is used in a given transmit direction, this parameter specifies the minimum expected throughput for the bearer channel.The values range in steps of 1000 bit/s. Unit: bit/s	bit/sUnsigned32r/w Constraints: range: 32000-500000000	.1.3.6.1.4.1.2011.6.144.1.1.2.1.12
hwVOPDataRateConfProfMaxEtrRtx If retransmission is used in a given transmit direction, this parameter specifies the maximum expected throughput for the bearer channel.The values range in steps of 1000 bit/s. Unit: bit/s	bit/sUnsigned32r/w Constraints: range: 32000-500000000	.1.3.6.1.4.1.2011.6.144.1.1.2.1.13
hwVOPDataRateConfProfMaxNdrRtx If retransmission is used in a given transmit direction, this parameter specifies the maximum net data rate for the bearer channel. The values range in steps of 1000 bit/s. Unit: bit/s	bit/sUnsigned32r/w Constraints: range: 32000-500000000	.1.3.6.1.4.1.2011.6.144.1.1.2.1.14
hwVOPDataRateConfProfMaxDataRateLowPwr Indicates the maximum Data Rate in Low Power state. Unit: bits/second	bit/sUnsigned32r/w Constraints: range: 32000-500000000	.1.3.6.1.4.1.2011.6.144.1.1.2.1.15
hwVOPDataRateConfProfL2MinDataRateToL0ActDataRate The ratio between data rate in low power state and data rate in normal state.	Unsigned32r/w Constraints: range: 0-99	.1.3.6.1.4.1.2011.6.144.1.1.2.1.16
hwVOPDataRateConfProfMinSosBr This parameter specifies the minimum net data rate required for a valid SOS request. The valid range of values is from 0 to 65535 Kbps. Unit: Kbps	KbpsUnsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2011.6.144.1.1.2.1.17
hwVOPGfastDataRateConfProfMinEtr This parameter specifies the minimum expected throughput for the bearer channel. The values range in steps of 1000 bit/s. Unit: bit/s	bit/sUnsigned32r/w Constraints: range: 32000-2000000000	.1.3.6.1.4.1.2011.6.144.1.1.2.1.18
hwVOPGfastDataRateConfProfMaxEtrobsolete This parameter specifies the G.fast maximum expected throughput for the bearer channel. The values range in steps of 1000 bit/s. Unit: bit/s	bit/sUnsigned32r/w Constraints: range: 32000-2000000000	.1.3.6.1.4.1.2011.6.144.1.1.2.1.19
hwVOPGfastDataRateConfProfMaxNdr This parameter specifies the G.fast maximum net data rate for the bearer channel. The values range in steps of 1000 bit/s. Unit: bit/s	bit/sUnsigned32r/w Constraints: range: 32000-2000000000	.1.3.6.1.4.1.2011.6.144.1.1.2.1.20
hwVOPGfastDataRateConfProfUsDataRate This parameter is a threshold on the G.fast net data rate upshift achieved over one or more bearer channel data rate adaptations. An upshift rate change alarm (event) is triggered when the actual data rate exceeds the…	bit/sUnsigned32r/w Constraints: range: 0-2000000000	.1.3.6.1.4.1.2011.6.144.1.1.2.1.21
hwVOPGfastDataRateConfProfDsDataRate This parameter is a threshold on the G.fast net data rate downshift achieved over one or more bearer channel data rate adaptations. A downshift rate change alarm (event) is triggered when the actual data rate is below…	bit/sUnsigned32r/w Constraints: range: 0-2000000000	.1.3.6.1.4.1.2011.6.144.1.1.2.1.22

The table hwVOPLineSpectrumConfProfTable contains the parameters that are mainly set
during the service delivery phase, independently for upstream and downstream.
Entries in this table MUST be maintained in a persistent manner.
          
A default profile with an index of '1' will always exist and its parameters will be set
to vendor-specific values, unless otherwise specified in this document.
The index of this table is hwVOPLineSpectrumConfProfIndex.

hwVOPLineSpectrumConfProfEntry row .1.3.6.1.4.1.2011.6.144.1.1.4.1

The table hwVOPLineSpectrumConfProfTable contains the parameters that are mainly set
during the service delivery phase, independently for upstream and downstream.
Entries in this table MUST be maintained in a persistent…

Indexes

hwVOPLineSpectrumConfProfIndex

Column	Syntax	OID
hwVOPLineSpectrumConfProfIndex The hwVOPLineSpectrumConfProfIndex identifies a row in the hwVOPLineSpectrumConfProfTable.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2011.6.144.1.1.4.1.1
hwVOPLineSpectrumConfProfRowStatus The hwVOPLineSpectrumConfProfRowStatus is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. Before a profile can be deleted or take…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.144.1.1.4.1.2
hwVOPLineSpectrumConfProfDescription The hwVOPLineSpectrumConfProfDescription contains an optional human readable description for the profile.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.2011.6.144.1.1.4.1.3
hwVOPLineSpectrumConfProfXtuTransSysEna xTU Transmission System Enabling (XTSE). A list of the different coding types enabled in this profile. It is coded in a bit-map representation with 1 or more bits set. A bit set to '1' means that the xTUs may apply the …	Xdsl2TransmissionModeTyper/w Type Values: 0 ansit1413 1 etsi 2 g9921PotsNonOverlapped 3 g9921PotsOverlapped 4 g9921IsdnNonOverlapped 5 g9921isdnOverlapped 6 g9921tcmIsdnNonOverlapped 7 g9921tcmIsdnOverlapped 8 g9922potsNonOverlapped 9 g9922potsOverlapped 10 g9922tcmIsdnNonOverlapped 11 g9922tcmIsdnOverlapped 12 g9921tcmIsdnSymmetric 13 reserved1 14 reserved2 15 reserved3 16 reserved4 17 reserved5 18 g9923PotsNonOverlapped 19 g9923PotsOverlapped 20 g9923IsdnNonOverlapped 21 g9923isdnOverlapped 22 reserved6 23 reserved7 24 g9924potsNonOverlapped 25 g9924potsOverlapped 26 reserved8 27 reserved9 28 g9923AnnexIAllDigNonOverlapped 29 g9923AnnexIAllDigOverlapped 30 g9923AnnexJAllDigNonOverlapped 31 g9923AnnexJAllDigOverlapped 32 g9924AnnexIAllDigNonOverlapped 33 g9924AnnexIAllDigOverlapped 34 g9923AnnexLMode1NonOverlapped 35 g9923AnnexLMode2NonOverlapped 36 g9923AnnexLMode3Overlapped 37 g9923AnnexLMode4Overlapped 38 g9923AnnexMPotsNonOverlapped 39 g9923AnnexMPotsOverlapped 40 g9925PotsNonOverlapped 41 g9925PotsOverlapped 42 g9925IsdnNonOverlapped 43 g9925isdnOverlapped 44 reserved10 45 reserved11 46 g9925AnnexIAllDigNonOverlapped 47 g9925AnnexIAllDigOverlapped 48 g9925AnnexJAllDigNonOverlapped 49 g9925AnnexJAllDigOverlapped 50 g9925AnnexMPotsNonOverlapped 51 g9925AnnexMPotsOverlapped 52 reserved12 53 reserved13 54 reserved14 55 reserved15 56 reserved16 57 reserved17 58 reserved18 59 reserved19 60 reserved20 61 reserved21 62 reserved22 63 reserved23 64 reserved24 65 reserved25 66 reserved26 67 reserved27 68 reserved28 69 reserved29 70 reserved30 71 reserved31 72 g9932AnnexAPots 73 g9932AnnexAIsdn 74 g9932AnnexBPots 75 g9932AnnexBIsdn 76 g9932AnnexCPots 77 g9932AnnexCIsdn 78 reserved32 79 reserved33 80 reserved34 81 g9701 82 reserved35 83 reserved36 84 reserved37 85 reserved38 86 reserved39 87 reserved40 88 reserved41 89 reserved42 90 reserved43 91 reserved44 92 reserved45 93 reserved46 94 reserved47 95 reserved48 96 reserved49 97 reserved50 98 reserved51 99 reserved52 100 reserved53 101 reserved54 102 reserved55 103 reserved56 104 reserved57 105 reserved58 106 reserved59 107 reserved60 108 reserved61 109 reserved62 110 reserved63 111 reserved64 112 reserved65 113 reserved66 114 reserved67 115 reserved68 116 reserved69 117 reserved70 118 reserved71 119 reserved72 120 reserved73 121 reserved74 122 reserved75 123 reserved76 124 reserved77 125 reserved78 126 reserved79 127 reserved80	.1.3.6.1.4.1.2011.6.144.1.1.4.1.4
hwVOPLineSpectrumConfProfPmMode Power management state Enabling (PMMode). Defines the power states the xTU-C or xTU-R may autonomously transition to on this line. This is a set of bits, where any bit with a '1' value means that the xTU is allowed to t…	Xdsl2LinePmModer/w Type Values: 0 allowTransitionsToIdle 1 allowTransitionsToLowPower	.1.3.6.1.4.1.2011.6.144.1.1.4.1.5
hwVOPLineSpectrumConfProfL0Time The minimum time (in seconds) between an Exit from the L2 state and the next Entry into the L2 state. Unit: seconds.	secondsUnsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.6.144.1.1.4.1.6
hwVOPLineSpectrumConfProfL2Time The minimum time (in seconds) between an Entry into the L2 state and the first Power Trim in the L2 state and between two consecutive Power Trims in the L2 State. Unit: seconds	secondsUnsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.6.144.1.1.4.1.7
hwVOPLineSpectrumConfProfL3Time This minimum time (in seconds) between an Entry into the L3 state and the L0 or L2 state. Unit: seconds	secondsUnsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2011.6.144.1.1.4.1.8
hwVOPLineSpectrumConfProfL2Atpr The maximum aggregate transmit power reduction (in dB) that can be performed at transition of L0 to L2 state or through a single Power Trim in the L2 state. Unit: dB.	dBUnsigned32r/w Constraints: range: 0-31	.1.3.6.1.4.1.2011.6.144.1.1.4.1.9
hwVOPLineSpectrumConfProfL2Atprt The total maximum aggregate transmit power reduction (in dB) that can be performed in an L2 state. This is the sum of all reductions of L2 Request (i.e., at transition of L0 to L2 state) and Power Trims. Unit: dB.	dBUnsigned32r/w Constraints: range: 0-31	.1.3.6.1.4.1.2011.6.144.1.1.4.1.10
hwVOPLineSpectrumConfProfReferenceClock This object configures the clock reference for the ATU-C in a VDSL Line.	Xdsl2LineClockReferenceTyper/w Type Values: 1 freeRun 2 system	.1.3.6.1.4.1.2011.6.144.1.1.4.1.11
hwVOPLineSpectrumConfProfBitSwapDs Enable or disable the bit swap downstream of a line.	Xdsl2BitSwapr/w Type Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.144.1.1.4.1.12
hwVOPLineSpectrumConfProfBitSwapUs Enable or disable the bit swap upstream of a line.	Xdsl2BitSwapr/w Type Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.144.1.1.4.1.13
hwVOPLineSpectrumConfProfScMaskDs Downstream subcarriers mask. A bitmap of 512 bits that allows masking up to 512 downstream subcarriers. If bit i (0 <= i < NSCds) is set to '1', the respective downstream subcarrier is masked, and if set to '0', the res…	Xdsl2ScMaskDsr/w Type Constraints: range: 0..64	.1.3.6.1.4.1.2011.6.144.1.1.4.1.14
hwVOPLineSpectrumConfProfScMaskUs Upstream subcarriers mask. A bitmap of 512 bits that allows masking up to 512 downstream subcarriers. If bit i (0 <= i < NSCds) is set to '1', the respective downstream subcarrier is masked, and if set to '0', the respe…	Xdsl2ScMaskUsr/w Type Constraints: range: 0..8	.1.3.6.1.4.1.2011.6.144.1.1.4.1.15
hwVOPLineSpectrumConfProfVdsl2CarMask VDSL2 specific subcarriers mask. This configuration parameter defines the restrictions, additional to the band plan, to determine the set of subcarriers allowed for transmission in both upstream and downstream direction…	Xdsl2CarMaskr/w Type Constraints: range: 0..128	.1.3.6.1.4.1.2011.6.144.1.1.4.1.16
hwVOPLineSpectrumConfProfMsgMinUs Minimum Overhead Rate Upstream. Defines the minimum rate of the message-based overhead that shall be maintained by the xTU in upstream direction. Expressed in bits per second and ranges from 4000 to 248000 bps. Unit: bi…	bits/secondUnsigned32r/w Constraints: range: 4000-248000	.1.3.6.1.4.1.2011.6.144.1.1.4.1.17
hwVOPLineSpectrumConfProfMsgMinDs Minimum Overhead Rate Downstream. Defines the minimum rate of the message-based overhead that shall be maintained by the xTU in downstream direction. Expressed in bits per second and ranges from 4000 to 248000 bps. Unit…	bits/secondUnsigned32r/w Constraints: range: 4000-248000	.1.3.6.1.4.1.2011.6.144.1.1.4.1.18
hwVOPLineSpectrumConfProfProfiles The configuration parameter contains the G.993.2 profiles to be allowed by the near-end xTU on this line. It is coded in a bitmap representation (0 if not allowed, 1 if allowed).	Xdsl2LineProfilesr/w Type Values: 0 profile8a 1 profile8b 2 profile8c 3 profile8d 4 profile12a 5 profile12b 6 profile17a 7 profile30a 8 profile35b 9 reserved1 10 reserved2 11 reserved3 12 reserved4 13 reserved5 14 reserved6 15 reserved7 16 reserved8 17 reserved9 18 reserved10 19 reserved11 20 reserved12 21 reserved13 22 reserved14 23 reserved15 24 reserved16 25 reserved17 26 reserved18 27 reserved19 28 reserved20 29 reserved21 30 reserved22 31 reserved23	.1.3.6.1.4.1.2011.6.144.1.1.4.1.19
hwVOPLineSpectrumConfProfUs0Mask The configuration parameter contains the US0 PSD masks to be allowed by the near-end xTU on the line. This parameter is only defined for G.993.2 Annex A. It is represented as a bitmap (0 if not allowed and 1 if allowed…	Xdsl2LineUs0Maskr/w Type Values: 0 eu32 1 eu36 2 eu40 3 eu44 4 eu48 5 eu52 6 eu56 7 eu60 8 eu64 9 eu128 10 reserved1 11 reserved2 12 reserved3 13 reserved4 14 reserved5 15 reserved6 16 adlu32 17 adlu36 18 adlu40 19 adlu44 20 adlu48 21 adlu52 22 adlu56 23 adlu60 24 adlu64 25 adlu128 26 reserved7 27 reserved8 28 reserved9 29 reserved10 30 reserved11 31 reserved12	.1.3.6.1.4.1.2011.6.144.1.1.4.1.20
hwVOPLineSpectrumConfProfCeFlag This parameter is a bit that enables the use of the optional cyclic extension values.	Xdsl2LineCeFlagr/w Type Values: 0 enableCyclicExtension	.1.3.6.1.4.1.2011.6.144.1.1.4.1.21
hwVOPLineSpectrumConfProfModeSpecificPSDProfilesUsed The value of this object represents a pointer to one or more rows in the hwVOPModeSpecificPSDConfProfTable. The number of pointers equals to the xDSL modes enabled in hwVOPLineSpectrumConfProfXtuTransSysEna. The followi…	OctetStringr/w Constraints: range: 512-512	.1.3.6.1.4.1.2011.6.144.1.1.4.1.22
hwVOPLineSpectrumConfProfForceInpDs If retransmission is not used in a given transmit direction,this parameter indicates that the framer settings of the downstream bearer shall be selected such that the impulse noise protection computed according to the …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.6.144.1.1.4.1.23
hwVOPLineSpectrumConfProfForceInpUs If retransmission is not used in a given transmit direction,this parameter indicates that the framer settings of the upstream bearer shall be selected such that the impulse noise protection computed according to the f…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.6.144.1.1.4.1.24
hwVOPLineSpectrumConfProfRtxModeDs The mode of operation of G.998.4 retransmission in downstream direction. Options: 1. forbidden (0) - G.998.4 retransmission not allowed. 2. preferred (1) - G.998.4 retransmission is preferred. 3. forced…	Enumerationr/w Enumerated Values: 0 forbidden 1 preferred 2 forced 3 testmode	.1.3.6.1.4.1.2011.6.144.1.1.4.1.25
hwVOPLineSpectrumConfProfRtxModeUs The mode of operation of G.998.4 retransmission in upstream direction. Options: 1. forbidden (0) - G.998.4 retransmission not allowed. 2. preferred (1) - G.998.4 retransmission is preferred. 3. forced …	Enumerationr/w Enumerated Values: 0 forbidden 1 preferred 2 forced 3 testmode	.1.3.6.1.4.1.2011.6.144.1.1.4.1.26
hwVOPLineSpectrumConfProfLeftrThreshDs If retransmission is used in downstream direction, this parameter specifies the threshold for declaring a near-end leftr defect. The value is coded as a fraction of the NDR with valid range from 0.01 to 0.99 with incr…	0.01Unsigned32r/w Constraints: range: 0-99	.1.3.6.1.4.1.2011.6.144.1.1.4.1.27
hwVOPLineSpectrumConfProfLeftrThreshUs If retransmission is used in upstream direction, this parameter specifies the threshold for declaring a near-end leftr defect. The value is coded as a fraction of the NDR with valid range from 0.01 to 0.99 with increm…	0.01Unsigned32r/w Constraints: range: 0-99	.1.3.6.1.4.1.2011.6.144.1.1.4.1.28
hwVOPGfastLineSpectrumConfProfGfastProfiles The configuration parameter contains the G.fast profiles to be allowed by the near-end xTU on this line. It is coded in a bitmap representation (0 if not allowed, 1 if allowed). Bit representation: 0 G.fast profile 106…	HWVOPGfastProfilesr/w Type Values: 0 fastProfile106 1 fastProfile212	.1.3.6.1.4.1.2011.6.144.1.1.4.1.29
hwVOPGfastLineSpectrumConfProfLowFreqEdgeValue Low-frequency Edge Stop-band Mask(LESM). If a LESM is used, the LESM shall be specified with breakpoints. These breakpoints are specified starting from ftr1, which is the start of the in-band PSD mask, as specified in […	Unsigned32r/w Constraints: range: 43-1023	.1.3.6.1.4.1.2011.6.144.1.1.4.1.30
hwVOPGfastLineSpectrumConfProfGfastCarMaskDs G.fast specific subcarriers mask. This configuration parameter defines the restrictions, additional to the band plan, to determine the set of subcarriers allowed for transmission in downstream directions. The parameter …	Xdsl2CarMaskr/w Type Constraints: range: 0..128	.1.3.6.1.4.1.2011.6.144.1.1.4.1.31
hwVOPGfastLineSpectrumConfProfGfastCarMaskUs G.fast specific subcarriers mask. This configuration parameter defines the restrictions, additional to the band plan, to determine the set of subcarriers allowed for transmission in upstream directions. The parameter sh…	Xdsl2CarMaskr/w Type Constraints: range: 0..128	.1.3.6.1.4.1.2011.6.144.1.1.4.1.32

The table hwVOPModeSpecificPSDConfProfTable contains the parameters that define the downstream
and upstream PSDs for a specific xDSL mode.
Entries in this table MUST be maintained in a persistent manner.
A default profile with an index of '1' will always exist and its parameters will be set to
vendor-specific values, unless otherwise specified in this document.
The index of this table is hwVOPModeSpecificPSDConfProfIndex.

hwVOPModeSpecificPSDConfProfEntry row .1.3.6.1.4.1.2011.6.144.1.1.6.1

The table hwVOPModeSpecificPSDConfProfTable contains the parameters that define the downstream
and upstream PSDs for a specific xDSL mode.
Entries in this table MUST be maintained in a persistent manner.
A default profi…

Indexes

hwVOPModeSpecificPSDConfProfIndex

Column	Syntax	OID
hwVOPModeSpecificPSDConfProfIndex The hwVOPModeSpecificPSDConfProfIndex identifies a row in the hwVOPModeSpecificPSDConfProfTable.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2011.6.144.1.1.6.1.1
hwVOPModeSpecificPSDConfProfRowStatus This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. Before a profile can be deleted or taken out of service (by settin…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.144.1.1.6.1.2
hwVOPModeSpecificPSDConfProfDescription The hwVOPModeSpecificPSDConfProfDescription contains an optional human readable description for the profile.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.2011.6.144.1.1.6.1.3
hwVOPModeSpecificPSDConfProfXdslModedeprecated A list of the different xDSL modes enabled in this profile. It is coded in a bit-map representation with 1 or more bits set. A bit set to '1' means that the profile applies to the respective xDSL Mode. A bit set to '0' …	Xdsl2TransmissionModeTyper/w Type Values: 0 ansit1413 1 etsi 2 g9921PotsNonOverlapped 3 g9921PotsOverlapped 4 g9921IsdnNonOverlapped 5 g9921isdnOverlapped 6 g9921tcmIsdnNonOverlapped 7 g9921tcmIsdnOverlapped 8 g9922potsNonOverlapped 9 g9922potsOverlapped 10 g9922tcmIsdnNonOverlapped 11 g9922tcmIsdnOverlapped 12 g9921tcmIsdnSymmetric 13 reserved1 14 reserved2 15 reserved3 16 reserved4 17 reserved5 18 g9923PotsNonOverlapped 19 g9923PotsOverlapped 20 g9923IsdnNonOverlapped 21 g9923isdnOverlapped 22 reserved6 23 reserved7 24 g9924potsNonOverlapped 25 g9924potsOverlapped 26 reserved8 27 reserved9 28 g9923AnnexIAllDigNonOverlapped 29 g9923AnnexIAllDigOverlapped 30 g9923AnnexJAllDigNonOverlapped 31 g9923AnnexJAllDigOverlapped 32 g9924AnnexIAllDigNonOverlapped 33 g9924AnnexIAllDigOverlapped 34 g9923AnnexLMode1NonOverlapped 35 g9923AnnexLMode2NonOverlapped 36 g9923AnnexLMode3Overlapped 37 g9923AnnexLMode4Overlapped 38 g9923AnnexMPotsNonOverlapped 39 g9923AnnexMPotsOverlapped 40 g9925PotsNonOverlapped 41 g9925PotsOverlapped 42 g9925IsdnNonOverlapped 43 g9925isdnOverlapped 44 reserved10 45 reserved11 46 g9925AnnexIAllDigNonOverlapped 47 g9925AnnexIAllDigOverlapped 48 g9925AnnexJAllDigNonOverlapped 49 g9925AnnexJAllDigOverlapped 50 g9925AnnexMPotsNonOverlapped 51 g9925AnnexMPotsOverlapped 52 reserved12 53 reserved13 54 reserved14 55 reserved15 56 reserved16 57 reserved17 58 reserved18 59 reserved19 60 reserved20 61 reserved21 62 reserved22 63 reserved23 64 reserved24 65 reserved25 66 reserved26 67 reserved27 68 reserved28 69 reserved29 70 reserved30 71 reserved31 72 g9932AnnexAPots 73 g9932AnnexAIsdn 74 g9932AnnexBPots 75 g9932AnnexBIsdn 76 g9932AnnexCPots 77 g9932AnnexCIsdn 78 reserved32 79 reserved33 80 reserved34 81 g9701 82 reserved35 83 reserved36 84 reserved37 85 reserved38 86 reserved39 87 reserved40 88 reserved41 89 reserved42 90 reserved43 91 reserved44 92 reserved45 93 reserved46 94 reserved47 95 reserved48 96 reserved49 97 reserved50 98 reserved51 99 reserved52 100 reserved53 101 reserved54 102 reserved55 103 reserved56 104 reserved57 105 reserved58 106 reserved59 107 reserved60 108 reserved61 109 reserved62 110 reserved63 111 reserved64 112 reserved65 113 reserved66 114 reserved67 115 reserved68 116 reserved69 117 reserved70 118 reserved71 119 reserved72 120 reserved73 121 reserved74 122 reserved75 123 reserved76 124 reserved77 125 reserved78 126 reserved79 127 reserved80	.1.3.6.1.4.1.2011.6.144.1.1.6.1.4
hwVOPModeSpecificPSDConfProfMaxNomPsdDs The maximum nominal transmit PSD in the downstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz (physical values are -60 to -30 dBm/Hz). Unit: 0.1 dBm/Hz.	0.1 dBm/HzInteger32r/w Constraints: range: -600--300	.1.3.6.1.4.1.2011.6.144.1.1.6.1.5
hwVOPModeSpecificPSDConfProfMaxNomPsdUs The maximum nominal transmit PSD in the upstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz (physical values are -60 to -30 dBm/Hz). Unit: 0.1 dBm/Hz.	0.1 dBm/HzInteger32r/w Constraints: range: -600--300	.1.3.6.1.4.1.2011.6.144.1.1.6.1.6
hwVOPModeSpecificPSDConfProfMaxNomAtpDs The maximum nominal aggregate transmit power in the downstream direction during initialization and Showtime. It ranges from 0 to 510 units of 0.1 dBm (0 to 255 physical values are 0 to 25.5 dBm, 256 to 510 physical valu…	0.1 dBmUnsigned32r/w Constraints: range: 0-510	.1.3.6.1.4.1.2011.6.144.1.1.6.1.7
hwVOPModeSpecificPSDConfProfMaxNomAtpUs The maximum nominal aggregate transmit power in the upstream direction during initialization and Showtime. It ranges from 0 to 510 units of 0.1 dBm (0 to 255 physical values are 0 to 25.5 dBm, 256 to 510 physical values…	0.1 dBmUnsigned32r/w Constraints: range: 0-510	.1.3.6.1.4.1.2011.6.144.1.1.6.1.8
hwVOPModeSpecificPSDConfProfaxAggRxPwrUs The maximum upstream aggregate receive power over the relevant set of subcarriers. The xTU-C should verify that the upstream power cutback is such that this maximum aggregate receive power value is honored. It ranges fr…	0.1 dBmInteger32r/w Constraints: range: -255-255 range: 2147483647-2147483647	.1.3.6.1.4.1.2011.6.144.1.1.6.1.9
hwVOPModeSpecificPSDConfProfPsdMaskDs The downstream PSD mask applicable at the U-R2 reference point. This parameter may impose PSD restrictions (breakpoints) in addition to the Limit PSD mask defined in the relevant Recommendation (e.g., ITU-T Recs G.992.5…	Xdsl2PsdMaskDsr/w Type Constraints: range: 0..96	.1.3.6.1.4.1.2011.6.144.1.1.6.1.10
hwVOPModeSpecificPSDConfProfPsdMaskUs The upstream PSD mask applicable at the U-R2 reference point. This parameter may impose PSD restrictions (breakpoints) in addition to the Limit PSD mask defined in the relevant Recommendation (e.g., ITU-T Recs G.992.5 a…	Xdsl2PsdMaskUsr/w Type Constraints: range: 0..48	.1.3.6.1.4.1.2011.6.144.1.1.6.1.11
hwVOPModeSpecificPSDConfProfPsdMaskSelectUs The selected upstream PSD mask. This parameter is used only for Annexes J and M of G.992.3 and G.992.5, and the same selection is used for all relevant enabled bits in hwVOPLineSpectrumConfProfXtuTransSysEna.	Xdsl2LinePsdMaskSelectUsr/w Type Values: 1 adlu32Eu32 2 adlu36Eu36 3 adlu40Eu40 4 adlu44Eu44 5 adlu48Eu48 6 adlu52Eu52 7 adlu56Eu56 8 adlu60Eu60 9 adlu64Eu64	.1.3.6.1.4.1.2011.6.144.1.1.6.1.12
hwVOPModeSpecificPSDConfProfLimitMask This configuration parameter contains the G.993.2 limit PSD masks of the selected PSD mask class, enabled by the near-end xTU on this line for each class of profiles. This parameter is defined per VDSL2 Annex enabled in…	Xdsl2LineLimitMaskr/w Type Values: 0 profile8Limit1 1 profile8Limit2 2 profile8Limit3 3 profile8Limit4 4 profile8Limit5 5 profile8Limit6 6 profile8Limit7 7 profile8Limit8 8 profile8Limit9 9 profile8Limit10 10 profile8Limit11 11 profile8Limit12 12 profile8Limit13 13 profile8Limit14 14 profile8Limit15 15 profile8Limit16 16 profile12Limit1 17 profile12Limit2 18 profile12Limit3 19 profile12Limit4 20 profile12Limit5 21 profile12Limit6 22 profile12Limit7 23 profile12Limit8 24 profile12Limit9 25 profile12Limit10 26 profile12Limit11 27 profile12Limit12 28 profile12Limit13 29 profile12Limit14 30 profile12Limit15 31 profile12Limit16 32 profile17Limit1 33 profile17Limit2 34 profile17Limit3 35 profile17Limit4 36 profile17Limit5 37 profile17Limit6 38 profile17Limit7 39 profile17Limit8 40 profile17Limit9 41 profile17Limit10 42 profile17Limit11 43 profile17Limit12 44 profile17Limit13 45 profile17Limit14 46 profile17Limit15 47 profile17Limit16 48 profile30Limit1 49 profile30Limit2 50 profile30Limit3 51 profile30Limit4 52 profile30Limit5 53 profile30Limit6 54 profile30Limit7 55 profile30Limit8 56 profile30Limit9 57 profile30Limit10 58 profile30Limit11 59 profile30Limit12 60 profile30Limit13 61 profile30Limit14 62 profile30Limit15 63 profile30Limit16 64 profile35Limit1 65 profile35Limit2 66 profile35Limit3 67 profile35Limit4 68 profile35Limit5 69 profile35Limit6 70 profile35Limit7 71 profile35Limit8 72 profile35Limit9 73 profile35Limit10 74 profile35Limit11 75 profile35Limit12 76 profile35Limit13 77 profile35Limit14 78 profile35Limit15 79 profile35Limit16	.1.3.6.1.4.1.2011.6.144.1.1.6.1.13
hwVOPModeSpecificPSDConfProfUs0Disable This configuration parameter indicates if the use of US0 is disabled for each limit PSD mask enabled in the hwVOPModeSpecificPSDConfProfLimitMask parameter. This parameter is defined per VDSL2 Annex enabled in the hwVOP…	Xdsl2LineUs0Disabler/w Type Values: 0 profile8Us0Disable1 1 profile8Us0Disable2 2 profile8Us0Disable3 3 profile8Us0Disable4 4 profile8Us0Disable5 5 profile8Us0Disable6 6 profile8Us0Disable7 7 profile8Us0Disable8 8 profile8Us0Disable9 9 profile8Us0Disable10 10 profile8Us0Disable11 11 profile8Us0Disable12 12 profile8Us0Disable13 13 profile8Us0Disable14 14 profile8Us0Disable15 15 profile8Us0Disable16 16 profile12Us0Disable1 17 profile12Us0Disable2 18 profile12Us0Disable3 19 profile12Us0Disable4 20 profile12Us0Disable5 21 profile12Us0Disable6 22 profile12Us0Disable7 23 profile12Us0Disable8 24 profile12Us0Disable9 25 profile12Us0Disable10 26 profile12Us0Disable11 27 profile12Us0Disable12 28 profile12Us0Disable13 29 profile12Us0Disable14 30 profile12Us0Disable15 31 profile12Us0Disable16 32 profile17Us0Disable1 33 profile17Us0Disable2 34 profile17Us0Disable3 35 profile17Us0Disable4 36 profile17Us0Disable5 37 profile17Us0Disable6 38 profile17Us0Disable7 39 profile17Us0Disable8 40 profile17Us0Disable9 41 profile17Us0Disable10 42 profile17Us0Disable11 43 profile17Us0Disable12 44 profile17Us0Disable13 45 profile17Us0Disable14 46 profile17Us0Disable15 47 profile17Us0Disable16 48 profile30Us0Disable1 49 profile30Us0Disable2 50 profile30Us0Disable3 51 profile30Us0Disable4 52 profile30Us0Disable5 53 profile30Us0Disable6 54 profile30Us0Disable7 55 profile30Us0Disable8 56 profile30Us0Disable9 57 profile30Us0Disable10 58 profile30Us0Disable11 59 profile30Us0Disable12 60 profile30Us0Disable13 61 profile30Us0Disable14 62 profile30Us0Disable15 63 profile30Us0Disable16 64 profile35Us0Disable1 65 profile35Us0Disable2 66 profile35Us0Disable3 67 profile35Us0Disable4 68 profile35Us0Disable5 69 profile35Us0Disable6 70 profile35Us0Disable7 71 profile35Us0Disable8 72 profile35Us0Disable9 73 profile35Us0Disable10 74 profile35Us0Disable11 75 profile35Us0Disable12 76 profile35Us0Disable13 77 profile35Us0Disable14 78 profile35Us0Disable15 79 profile35Us0Disable16	.1.3.6.1.4.1.2011.6.144.1.1.6.1.14
hwVOPModeSpecificPSDConfProfClassMask In order to reduce the number of configuration possibilities, the limit Power Spectral Density masks (see hwVOPModeSpecificPSDConfProfLimitMask) are grouped in PSD mask classes. Each class is designed such that the PSD …	Xdsl2LineClassMaskr/w Type Values: 1 none 2 a998ORb997M1cORc998B 3 b997M1xOR998co 4 b997M2x 5 b998M1x 6 b998M2x 7 b998AdeM2x 8 bHpeM1 9 b998E35M2x 10 b998Ade35M2x	.1.3.6.1.4.1.2011.6.144.1.1.6.1.15
hwVOPGfastModeSpecificPSDConfProfPsdMaskDs The downstream PSD mask applicable at the U-O2 reference point. This parameter may impose PSD restrictions (breakpoints) in addition to the Limit PSD mask defined in the relevant Recommendation (e.g., ITU-T Recs G.9701)…	HWVOPGfastPsdMaskr/w Type Constraints: range: 0..96	.1.3.6.1.4.1.2011.6.144.1.1.6.1.16
hwVOPGfastModeSpecificPSDConfProfPsdMaskUs The upstream PSD mask applicable at the U-R2 reference point. This parameter may impose PSD restrictions (breakpoints) in addition to the Limit PSD mask defined in the relevant Recommendation (e.g., ITU-T Recs G.9701). …	HWVOPGfastPsdMaskr/w Type Constraints: range: 0..96	.1.3.6.1.4.1.2011.6.144.1.1.6.1.17
hwVOPGfastModeSpecificPSDConfProfMaxNomAtpDs The G.fast maximum nominal aggregate transmit power in the downstream direction during initialization and Showtime. It ranges from 0 to 510 units of 0.1 dBm (0 to 255 physical values are 0 to 25.5 dBm, 256 to 510 physic…	0.1 dBmUnsigned32r/w Constraints: range: 0-510	.1.3.6.1.4.1.2011.6.144.1.1.6.1.18
hwVOPGfastModeSpecificPSDConfProfMaxNomAtpUs The G.fast maximum nominal aggregate transmit power in the upstream direction during initialization and Showtime. It ranges from 0 to 510 units of 0.1 dBm (0 to 255 physical values are 0 to 25.5 dBm, 256 to 510 physical…	0.1 dBmUnsigned32r/w Constraints: range: 0-510	.1.3.6.1.4.1.2011.6.144.1.1.6.1.19

The table hwVOPUPBOConfProfTable contains all the parameters related to upstream power back-off.
Entries in this table MUST be maintained in a persistent manner.
A default profile with an index of '1' will always exist and its parameters will be
set to vendor-specific values, unless otherwise specified in this document.
The index of this table is hwVOPUPBOConfProfIndex.

hwVOPUPBOConfProfEntry row .1.3.6.1.4.1.2011.6.144.1.1.8.1

The table hwVOPUPBOConfProfTable contains all the parameters related to upstream power back-off.
Entries in this table MUST be maintained in a persistent manner.
A default profile with an index of '1' will always exist …

Indexes

hwVOPUPBOConfProfIndex

Column	Syntax	OID
hwVOPUPBOConfProfIndex The hwVOPUPBOConfProfIndex identifies a row in the hwVOPUPBOConfProfTable.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2011.6.144.1.1.8.1.1
hwVOPUPBOConfProfRowStatus This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. Before a profile can be deleted or taken out of service (by settin…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.144.1.1.8.1.2
hwVOPUPBOConfProfDescription The hwVOPUPBOConfProfDescription contains an optional human readable description for the profile.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.2011.6.144.1.1.8.1.3
hwVOPUPBOConfProfUpboKL This configuration parameter defines the electrical length expressed in dB at 1MHz, kl0, configured by the CO-MIB.The value ranges from 0 (coded as 0) to 128 dB (coded as 1280) in steps of 0.1 dB. This parameter is rele…	0.1 dBUnsigned32r/w Constraints: range: 0-1280	.1.3.6.1.4.1.2011.6.144.1.1.8.1.4
hwVOPUPBOConfProfUpboKLF Defines the upstream power backoff force mode.	Xdsl2UpboKLFr/w Type Values: 1 auto 2 override 3 disableUpbo	.1.3.6.1.4.1.2011.6.144.1.1.8.1.5
hwVOPUPBOConfProfKlAuto This parameter defines the mode in which kl0 is computed when hwVOPUPBOConfProfUpboKLF is auto. Options: 1--max(kl0_CO,kl0_CPE) 2--min(kl0_CO,kl0_CPE) 3--kl0_CO 4--kl0_CPE	Unsigned32r/w Constraints: range: 1-4	.1.3.6.1.4.1.2011.6.144.1.1.8.1.6
hwVOPUPBOConfProfPsdAUs1 This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band US1. A UPBOPSD defined for each band shall consist of two para…	0.01 dBm/HzInteger32r/w Constraints: range: 4000-8095	.1.3.6.1.4.1.2011.6.144.1.1.8.1.7
hwVOPUPBOConfProfPsdBUs1 This configuration parameter defines the 'b' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band US1. A UPBOPSD defined for each band shall consist of two para…	0.01 dBm/HzInteger32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.2011.6.144.1.1.8.1.8
hwVOPUPBOConfProfPsdAUs2 This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band US2. A UPBOPSD defined for each band shall consist of two para…	0.01 dBm/HzInteger32r/w Constraints: range: 4000-8095	.1.3.6.1.4.1.2011.6.144.1.1.8.1.9
hwVOPUPBOConfProfPsdBUs2 This configuration parameter defines the 'b' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band US2. A UPBOPSD defined for each band shall consist of two para…	0.01 dBm/HzInteger32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.2011.6.144.1.1.8.1.10
hwVOPUPBOConfProfPsdAUs3 This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band US3. A UPBOPSD defined for each band shall consist of two para…	0.01 dBm/HzInteger32r/w Constraints: range: 4000-8095	.1.3.6.1.4.1.2011.6.144.1.1.8.1.11
hwVOPUPBOConfProfPsdBUs3 This configuration parameter defines the 'b' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band US3. A UPBOPSD defined for each band shall consist of two para…	0.01 dBm/HzInteger32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.2011.6.144.1.1.8.1.12
hwVOPUPBOConfProfPsdAUs4 This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band US4. A UPBOPSD defined for each band shall consist of two para…	0.01 dBm/HzInteger32r/w Constraints: range: 4000-8095	.1.3.6.1.4.1.2011.6.144.1.1.8.1.13
hwVOPUPBOConfProfPsdBUs4 This configuration parameter defines the 'b' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band US4. A UPBOPSD defined for each band shall consist of two para…	0.01 dBm/HzInteger32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.2011.6.144.1.1.8.1.14
hwVOPUPBOConfProfBoostMode The Equalized FEXT UPBO method. Options: 1. disable(1) - The Equalized FEXT UPBO method is not supported. 2. enable(2) - The Equalized FEXT UPBO method is supported.	Xdsl2UpboBoostModer/w Type Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.144.1.1.8.1.15
hwVOPUPBOConfProfUpboKLREFUs1 This parameter defines the UPBO reference electrical length used to compute the upstream power back-off for the upstream band US1, for the optional Equalized FEXT UPBO method. The value ranges from 1.8 to 63.5 dB in ste…	0.1 dBInteger32r/w Constraints: range: 0-0 range: 18-635	.1.3.6.1.4.1.2011.6.144.1.1.8.1.16
hwVOPUPBOConfProfUpboKLREFUs2 This parameter defines the UPBO reference electrical length used to compute the upstream power back-off for the upstream band US2, for the optional Equalized FEXT UPBO method. The value ranges from 1.8 to 63.5 dB in ste…	0.1 dBInteger32r/w Constraints: range: 0-0 range: 18-635	.1.3.6.1.4.1.2011.6.144.1.1.8.1.17
hwVOPUPBOConfProfUpboKLREFUs3 This parameter defines the UPBO reference electrical length used to compute the upstream power back-off for the upstream band US3, for the optional Equalized FEXT UPBO method. The value ranges from 1.8 to 63.5 dB in ste…	0.1 dBInteger32r/w Constraints: range: 0-0 range: 18-635	.1.3.6.1.4.1.2011.6.144.1.1.8.1.18
hwVOPUPBOConfProfUpboKLREFUs4 This parameter defines the UPBO reference electrical length used to compute the upstream power back-off for the upstream band US4, for the optional Equalized FEXT UPBO method. The value ranges from 1.8 to 63.5 dB in ste…	0.1 dBInteger32r/w Constraints: range: 0-0 range: 18-635	.1.3.6.1.4.1.2011.6.144.1.1.8.1.19
hwVOPUPBOConfProfAeleMode This parameter defines the UPBO electrical length estimation mode to be used in the Alternative Electrical Length Estimation method (ELE-M1) in 7.2.1.3.2.2/G.993.2. The value of this parameter is 0, 1, 2 or 3. 0-ELE_M…	Unsigned32r/w Constraints: range: 0-3	.1.3.6.1.4.1.2011.6.144.1.1.8.1.20
hwVOPUPBOConfProfUpboElmt This parameter defines the UPBO electrical length minimum threshold percentile in percent used in the Alternative Electrical Length Estimation method (ELE-M1) in clause 7.2.1.3.2.2/G.993.2. It is set by network manag…	Unsigned32r/w Constraints: range: 0-15	.1.3.6.1.4.1.2011.6.144.1.1.8.1.21
hwVOPGfastUPBOConfProfUpboKL This configuration parameter defines the G.fast electrical length expressed in dB at 1MHz, kl0, configured by the DPU-MIB.The value ranges from 0 (coded as 0) to 128 dB (coded as 1280) in steps of 0.1 dB. This parameter…	0.1 dBUnsigned32r/w Constraints: range: 0-1280	.1.3.6.1.4.1.2011.6.144.1.1.8.1.22
hwVOPGfastUPBOConfProfUpboKLF Defines the G.fast upstream power backoff force mode.	Xdsl2UpboKLFr/w Type Values: 1 auto 2 override 3 disableUpbo	.1.3.6.1.4.1.2011.6.144.1.1.8.1.23
hwVOPGfastUPBOConfProfKlAuto This parameter defines the mode in which kl0 is computed when hwVOPGfastUPBOConfProfUpboKLF is auto. Options: 1--max(kl0_CO,kl0_CPE) 2--min(kl0_CO,kl0_CPE) 3--kl0_CO 4--kl0_CPE	Unsigned32r/w Constraints: range: 1-4	.1.3.6.1.4.1.2011.6.144.1.1.8.1.24
hwVOPGfastUPBOConfProfPsdA This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off.A UPBOPSD shall consist of two parameters [a, b]. Parameter 'a' ranges from 40 dBm/H…	0.01 dBm/HzInteger32r/w Constraints: range: 4000-8095	.1.3.6.1.4.1.2011.6.144.1.1.8.1.25
hwVOPGfastUPBOConfProfPsdB This configuration parameter defines the 'b' reference parameter of the UPBO reference PSD used to compute the upstream power back-off.A UPBOPSD shall consist of two parameters [a, b]. Parameter 'a' ranges from 40 dBm/H…	0.01 dBm/HzInteger32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.2011.6.144.1.1.8.1.26
hwVOPGfastUPBOConfProfUpboKLREF This parameter defines the UPBO reference electrical length used to compute the upstream power back-off, for the optional Equalized FEXT UPBO method. The value ranges from 1.8 to 63.5 dB in steps of 0.1 dB with special …	0.1 dBInteger32r/w Constraints: range: 0-0 range: 18-635	.1.3.6.1.4.1.2011.6.144.1.1.8.1.27

The table hwVOPDPBOConfProfTable contains all the parameters related to downstream power back-off.
Entries in this table MUST be maintained in a persistent manner.
A default profile with an index of '1' will always exist and its parameters will be set to
vendor-specific values, unless otherwise specified in this document.
The index of this table is hwVOPDPBOConfProfIndex.

hwVOPDPBOConfProfEntry row .1.3.6.1.4.1.2011.6.144.1.1.10.1

The table hwVOPDPBOConfProfTable contains all the parameters related to downstream power back-off.
Entries in this table MUST be maintained in a persistent manner.
A default profile with an index of '1' will always exis…

Indexes

hwVOPDPBOConfProfIndex

Column	Syntax	OID
hwVOPDPBOConfProfIndex The hwVOPDPBOConfProfIndex identifies a row in the hwVOPDPBOConfProfTable.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2011.6.144.1.1.10.1.1
hwVOPDPBOConfProfRowStatus This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. Before a profile can be deleted or taken out of service (by settin…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.144.1.1.10.1.2
hwVOPDPBOConfProfProfDescription The hwVOPDPBOConfProfProfDescription contains an optional human readable description for the profile.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.2011.6.144.1.1.10.1.3
hwVOPDPBOConfProfWkMdMask This configuration parameter defines the current enabled DPBO working mode mask. DPBO working mode enabling:1-ADSL, 2-ADSL2+ 3-VDSL2. Options : 1--current enabled dpbo work mode:ADSL 2--current enabled dpbo work mode:AD…	Unsigned32r/w Constraints: range: 0-511	.1.3.6.1.4.1.2011.6.144.1.1.10.1.4
hwVOPDPBOConfProfEsEL This configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts the xTU-C that is subject to spectr…	0.5 dBUnsigned32r/w Constraints: range: 0-511	.1.3.6.1.4.1.2011.6.144.1.1.10.1.5
hwVOPDPBOConfProfEselMin DPBOESELMIN in dB is the minimum of all main cable losses for the KVz supplied when using the SOL model (expansion of a KVz and VDSL2 provision of additional KVz areas from this KVz using cross-cables to additional KVz)…	0.5dBUnsigned32r/w Constraints: range: 0-511	.1.3.6.1.4.1.2011.6.144.1.1.10.1.6
hwVOPDPBOConfProfEPsd This configuration parameter defines the PSD mask that is assumed to be permitted at the exchange. This parameter shall use the same format as xdsl2LConfProfPsdMaskDs (PSDMASKds). The maximum number of breakpoints for x…	Xdsl2PsdMaskDsr/w Type Constraints: range: 0..96	.1.3.6.1.4.1.2011.6.144.1.1.10.1.7
hwVOPDPBOConfProfCableModelA The E-side Cable Model parameter A (DPBOESCMA) of the cable model (DPBOESCM) for cables connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts the xTU-C that is subject to spectrally …	2^-8Unsigned32r/w Constraints: range: 0-640	.1.3.6.1.4.1.2011.6.144.1.1.10.1.8
hwVOPDPBOConfProfCableModelB The E-side Cable Model parameter B (DPBOESCMB) of the cable model (DPBOESCM) for cables connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts the xTU-C that is subject to spectrally …	2^-8Unsigned32r/w Constraints: range: 0-640	.1.3.6.1.4.1.2011.6.144.1.1.10.1.9
hwVOPDPBOConfProfCableModelC The E-side Cable Model parameter C (DPBOESCMC) of the cable model (DPBOESCM) for cables connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts the xTU-C that is subject to spectrally …	2^-8Unsigned32r/w Constraints: range: 0-640	.1.3.6.1.4.1.2011.6.144.1.1.10.1.10
hwVOPDPBOConfProfMus This configuration parameter defines the assumed Minimum Usable receive PSD mask (in dBm/Hz) for exchange based services, used to modify parameter xdsl2LConfProfDpboFMax (DPBOFMAX) defined below [to determine the DPBO].…	-0.5 dBm/HzUnsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.6.144.1.1.10.1.11
hwVOPDPBOConfProfFMin This configuration parameter defines the minimum frequency from which the DPBO shall be applied. It ranges from 0 kHz (coded as 0) to 8832 kHz (coded as 2048) in steps of 4.3125 kHz. This parameter is used only for G.99…	4.3125 kHzUnsigned32r/w Constraints: range: 0-2048	.1.3.6.1.4.1.2011.6.144.1.1.10.1.12
hwVOPDPBOConfProfFMax This configuration parameter defines the maximum frequency at which DPBO may be applied. It ranges from 138 kHz (coded as 32) to 35323.6875 kHz (coded as 8191) in steps of 4.3125 kHz. This parameter is used only for G.9…	4.3125 kHzUnsigned32r/w Constraints: range: 32-8191	.1.3.6.1.4.1.2011.6.144.1.1.10.1.13
hwVOPDPBOConfFEXTFactor This configuration parameter defines the switch of the delta FEXT-factor. Options: 1. disable(1) - The switch of the delta FEXT-factor is disabled 2. enable(2) - The switch of the delta FEXT-factor is enabled	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.144.1.1.10.1.14

RFI notches are necessary only when radio services may be disturbed during operation,
therefore this parameter should be separated from all other profiles.
Entries in this table MUST be maintained in a persistent manner.
A default profile with an index of '1' will always exist and its parameters will be set to
vendor-specific values, unless otherwise specified in this document.
The index of this table is hwVOPRFIConfProfIndex.

hwVOPRFIConfProfEntry row .1.3.6.1.4.1.2011.6.144.1.1.12.1

RFI notches are necessary only when radio services may be disturbed during operation,
therefore this parameter should be separated from all other profiles.
Entries in this table MUST be maintained in a persistent manner…

Indexes

hwVOPRFIConfProfIndex

Column	Syntax	OID
hwVOPRFIConfProfIndex The hwVOPRFIConfProfIndex identifies a row in the hwVOPRFIConfProfTable.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2011.6.144.1.1.12.1.1
hwVOPRFIConfProfRowStatus This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. Before a profile can be deleted or taken out of service (by settin…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.144.1.1.12.1.2
hwVOPRFIConfProfDescription The hwVOPRFIConfProfDescription contains an optional human readable description for the profile.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.2011.6.144.1.1.12.1.3
hwVOPRFIConfProfRfiBands For ADSL2plus operation mode, this configuration parameter defines the subset of downstream PSD mask breakpoints, as specified in hwVOPModeSpecificPSDConfProfPsdMaskDs (PSDMASKds), that shall be used to notch an RFI ban…	Xdsl2RfiBandsr/w Type Constraints: range: 0..256	.1.3.6.1.4.1.2011.6.144.1.1.12.1.4
hwVOPGfastRFIConfProfRfiBands This configuration parameter defines the bands where the PSD shall be reduced as specified in ITU-T G.9701 #7.3.1.2. Each band shall be represented by a start and stop subcarrier indices with a subcarrier spacing of 51…	Xdsl2RfiBandsr/w Type Constraints: range: 0..256	.1.3.6.1.4.1.2011.6.144.1.1.12.1.5
hwVOPGfastRFIConfProfIarBands Defines for each International Amateur Radio (IAR) band whether transmit PSD reduction is enabled or disabled in that band. It is represented as a bitmap (0 if not allowed and 1 if allowed)with the following definitions…	HWVOPGfastIarBandsr/w Type Values: 0 iarBand1800To2000 1 iarBand3500To4000 2 iarBand7000To7300 3 iarBand10100To10150 4 iarBand14000To14350 5 iarBand18068To18168 6 iarBand21000To21450 7 iarBand24890To24990 8 iarBand28000To29700 9 iarBand50000To54000 10 iarBand70000To70500 11 iarBand144000To148000	.1.3.6.1.4.1.2011.6.144.1.1.12.1.6

Noise margins are important for line robustness and need to be configured independently
from other spectrum related parameters to reduce the amount of combinations.
These parameters may be adjusted because of the changed disturber's impact while data rates aren't changed.
Entries in this table MUST be maintained in a persistent manner.
A default profile with an index of '1' will always exist and its parameters will be set to
vendor-specific values, unless otherwise specified in this document.
The index of this table is hwVOPSNRMarginConfProfIndex.

hwVOPSNRMarginConfProfEntry row .1.3.6.1.4.1.2011.6.144.1.1.14.1

Noise margins are important for line robustness and need to be configured independently
from other spectrum related parameters to reduce the amount of combinations.
These parameters may be adjusted because of the change…

Indexes

hwVOPSNRMarginConfProfIndex

Column	Syntax	OID
hwVOPSNRMarginConfProfIndex The hwVOPSNRMarginConfProfIndex identifies a row in the hwVOPSNRMarginConfProfTable.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2011.6.144.1.1.14.1.1
hwVOPSNRMarginConfProfRowStatus This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. Before a profile can be deleted or taken out of service (by settin…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.144.1.1.14.1.2
hwVOPSNRMarginConfProfDescription The hwVOPSNRMarginConfProfDescription contains an optional human readable description for the profile.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.2011.6.144.1.1.14.1.3
hwVOPSNRMarginConfProfMinSnrmDs The minimum Noise Margin the xTU-R receiver shall tolerate. If the noise margin falls below this level, the xTU-R shall request that the xTU-C increase the xTU-C transmit power. If an increase of xTU-C transmit power is…	0.1 dBUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.2011.6.144.1.1.14.1.4
hwVOPSNRMarginConfProfMinSnrmUs The minimum Noise Margin the xTU-C receiver shall tolerate. If the noise margin falls below this level, the xTU-C shall request that the xTU-R increase the xTU-R transmit power. If an increase of xTU-R transmit power is…	0.1 dBUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.2011.6.144.1.1.14.1.5
hwVOPSNRMarginConfProfTargetSnrmDs The minimum Noise Margin the xTU-R receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete initialization. The target noise margin ranges from 0 to 31…	0.1 dBUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.2011.6.144.1.1.14.1.6
hwVOPSNRMarginConfProfTargetSnrmUs The minimum Noise Margin the xTU-C receiver shall achieve, relative to the BER requirement for each of the upstream bearer channels, to successfully complete initialization. The target noise margin ranges from 0 to 310 …	0.1 dBUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.2011.6.144.1.1.14.1.7
hwVOPSNRMarginConfProfMaxSnrmDs The maximum Noise Margin the xTU-R receiver shall try to sustain. If the Noise Margin is above this level, the xTU-R shall request that the xTU-C reduce the xTU-C transmit power to get a noise margin below this limit (i…	0.1 dBUnsigned32r/w Constraints: range: 0-310 range: 2147483647-2147483647	.1.3.6.1.4.1.2011.6.144.1.1.14.1.8
hwVOPSNRMarginConfProfMaxSnrmUs The maximum Noise Margin the xTU-C receiver shall try to sustain. If the Noise Margin is above this level, the xTU-C shall request that the xTU-R reduce the xTU-R transmit power to get a noise margin below this limit (i…	0.1 dBUnsigned32r/w Constraints: range: 0-310 range: 2147483647-2147483647	.1.3.6.1.4.1.2011.6.144.1.1.14.1.9
hwVOPSNRMarginConfProfSnrModeDs This parameter enables the transmitter referred virtual noise in the downstream direction. The configuration parameters for virtual noise are in the hwVOPVirtualNoiseConfProfTable.	Xdsl2LineSnrModer/w Type Values: 1 virtualNoiseDisabled 2 virtualNoiseEnabled	.1.3.6.1.4.1.2011.6.144.1.1.14.1.10
hwVOPSNRMarginConfProfSnrModeUs This parameter enables the transmitter referred virtual noise in the upstream direction. The configuration parameters for virtual noise are in the hwVOPVirtualNoiseConfProfTable.	Xdsl2LineSnrModer/w Type Values: 1 virtualNoiseDisabled 2 virtualNoiseEnabled	.1.3.6.1.4.1.2011.6.144.1.1.14.1.11
hwVOPSNRMarginConfProfRaModeDs The mode of operation of a rate-adaptive xTU-C in the transmit direction.	Xdsl2RaModer/w Type Values: 1 manual 2 raInit 3 dynamicRa 4 dynamicwithsos	.1.3.6.1.4.1.2011.6.144.1.1.14.1.12
hwVOPSNRMarginConfProfRaModeUs The mode of operation of a rate-adaptive xTU-R in the transmit direction.	Xdsl2RaModer/w Type Values: 1 manual 2 raInit 3 dynamicRa 4 dynamicwithsos	.1.3.6.1.4.1.2011.6.144.1.1.14.1.13
hwVOPSNRMarginConfProfRaUsNrmDs The Downstream Up-Shift Noise Margin value, to be used when hwVOPSNRMarginConfProfRaModeDs is set to dynamicRa. If the downstream noise margin is above this value, and stays above it for more than the time specified by …	0.1 dBUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.2011.6.144.1.1.14.1.14
hwVOPSNRMarginConfProfRaUsNrmUs The Upstream Up-Shift Noise Margin value, to be used when hwVOPSNRMarginConfProfRaModeUs is set to dynamicRa. If the upstream noise margin is above this value, and stays above it for more than the time specified by the …	0.1 dBUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.2011.6.144.1.1.14.1.15
hwVOPSNRMarginConfProfRaDsNrmDs The Downstream Down-Shift Noise Margin value, to be used when hwVOPSNRMarginConfProfRaModeDs is set to dynamicRa. If the downstream noise margin is below this value, and stays below it for more than the time specified b…	0.1 dBUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.2011.6.144.1.1.14.1.16
hwVOPSNRMarginConfProfRaDsNrmUs The Upstream Down-Shift Noise Margin value, to be used when hwVOPSNRMarginConfProfRaModeUs is set to dynamicRa. If the upstream noise margin is below this value, and stays below it for more than the time specified by th…	0.1 dBUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.2011.6.144.1.1.14.1.17
hwVOPSNRMarginConfProfUsTimeDs The Downstream Up-Shift Time Interval, to be used when hwVOPSNRMarginConfProfRaModeDs is set to dynamicRa. The interval of time that the downstream noise margin should stay above the Downstream Up-Shift Noise Margin bef…	secondsUnsigned32r/w Constraints: range: 0-16383	.1.3.6.1.4.1.2011.6.144.1.1.14.1.18
hwVOPSNRMarginConfProfUsTimeUs The Upstream Up-Shift Time Interval, to be used when hwVOPSNRMarginConfProfRaModeUs is set to dynamicRa. The interval of time the upstream noise margin should stay above the Upstream Up-Shift Noise Margin before the xTU…	secondsUnsigned32r/w Constraints: range: 0-16383	.1.3.6.1.4.1.2011.6.144.1.1.14.1.19
hwVOPSNRMarginConfProfDsTimeDs The Downstream Downshift Time Interval, to be used when hwVOPSNRMarginConfProfRaModeDs is set to dynamicRa. The interval of time the downstream noise margin should stay below the Downstream Down-Shift Noise Margin befor…	secondsUnsigned32r/w Constraints: range: 0-16383	.1.3.6.1.4.1.2011.6.144.1.1.14.1.20
hwVOPSNRMarginConfProfDsTimeUs The Upstream Down-Shift Time Interval, to be used when hwVOPSNRMarginConfProfUsTimeUs is set to dynamicRa. The interval of time the upstream noise margin should stay below the Upstream Down-Shift Noise Margin before the…	secondsUnsigned32r/w Constraints: range: 0-16383	.1.3.6.1.4.1.2011.6.144.1.1.14.1.21
hwVOPGfastSNRMarginConfProfMinSnrmDs The G.fast minimum Noise Margin the xTU-R receiver shall tolerate. If the noise margin falls below this level, the xTU-R shall request that the xTU-C increase the xTU-C transmit power. If an increase of xTU-C transmit p…	0.1 dBUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.2011.6.144.1.1.14.1.22
hwVOPGfastSNRMarginConfProfMinSnrmUs The G.fast minimum Noise Margin the xTU-C receiver shall tolerate. If the noise margin falls below this level, the xTU-C shall request that the xTU-R increase the xTU-R transmit power. If an increase of xTU-R transmit p…	0.1 dBUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.2011.6.144.1.1.14.1.23
hwVOPGfastSNRMarginConfProfTargetSnrmDs The G.fast minimum Noise Margin the xTU-R receiver shall achieve, relative to the BER requirement, to successfully complete initialization. The target noise margin ranges from 0 to 310 units of 0.1 dB (Physical values …	0.1 dBUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.2011.6.144.1.1.14.1.24
hwVOPGfastSNRMarginConfProfTargetSnrmUs The G.fast minimum Noise Margin the xTU-C receiver shall achieve, relative to the BER requirement, to successfully complete initialization. The target noise margin ranges from 0 to 310 units of 0.1 dB (Physical values …	0.1 dBUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.2011.6.144.1.1.14.1.25
hwVOPGfastSNRMarginConfProfMaxSnrmDs The G.fast maximum Noise Margin the xTU-R receiver shall try to sustain. If the Noise Margin is above this level, the xTU-R shall request that the xTU-C reduce the xTU-C transmit power to get a noise margin below this l…	0.1 dBUnsigned32r/w Constraints: range: 0-310 range: 2147483647-2147483647	.1.3.6.1.4.1.2011.6.144.1.1.14.1.26
hwVOPGfastSNRMarginConfProfMaxSnrmUs The G.fast maximum Noise Margin the xTU-C receiver shall try to sustain. If the Noise Margin is above this level, the xTU-C shall request that the xTU-R reduce the xTU-R transmit power to get a noise margin below this l…	0.1 dBUnsigned32r/w Constraints: range: 0-310 range: 2147483647-2147483647	.1.3.6.1.4.1.2011.6.144.1.1.14.1.27
hwVOPGfastSNRMarginConfProfSnrModeDsobsolete This parameter enables the G.fast transmitter referred virtual noise in the downstream direction. The configuration parameters for virtual noise are in the hwVOPVirtualNoiseConfProfTable.	Xdsl2LineSnrModer/w Type Values: 1 virtualNoiseDisabled 2 virtualNoiseEnabled	.1.3.6.1.4.1.2011.6.144.1.1.14.1.28
hwVOPGfastSNRMarginConfProfSnrModeUsobsolete This parameter enables the G.fast transmitter referred virtual noise in the upstream direction. The configuration parameters for virtual noise are in the hwVOPVirtualNoiseConfProfTable.	Xdsl2LineSnrModer/w Type Values: 1 virtualNoiseDisabled 2 virtualNoiseEnabled	.1.3.6.1.4.1.2011.6.144.1.1.14.1.29
hwVOPGfastSNRMarginConfProfRaModeDsobsolete The mode of operation of a rate-adaptive xTU-C in the transmit direction. Options: 1. manual (1) - No Rate-Adaptation. The initialization process attempts to synchronize to a specified rate. …	HWVOPGfastRaModer/w Type Values: 1 manual 2 raInit 3 dynamicRa 4 dynamicwithfra	.1.3.6.1.4.1.2011.6.144.1.1.14.1.30
hwVOPGfastSNRMarginConfProfRaModeUsobsolete The mode of operation of a rate-adaptive xTU-R in the transmit direction. Options: 1. manual (1) - No Rate-Adaptation. The initialization process attempts to synchronize to a specified rate. …	HWVOPGfastRaModer/w Type Values: 1 manual 2 raInit 3 dynamicRa 4 dynamicwithfra	.1.3.6.1.4.1.2011.6.144.1.1.14.1.31
hwVOPGfastSNRMarginConfProfRaUsNrmDs The G.fast Downstream Up-Shift Noise Margin value, to be used when hwVOPGfastSNRMarginConfProfRaModeDs is set to dynamicRa. If the downstream noise margin is above this value, and stays above it for more than the time s…	0.1 dBUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.2011.6.144.1.1.14.1.32
hwVOPGfastSNRMarginConfProfRaUsNrmUs The G.fast Upstream Up-Shift Noise Margin value, to be used when hwVOPGfastSNRMarginConfProfRaModeUs is set to dynamicRa. If the upstream noise margin is above this value, and stays above it for more than the time speci…	0.1 dBUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.2011.6.144.1.1.14.1.33
hwVOPGfastSNRMarginConfProfRaDsNrmDs The G.fast Downstream Down-Shift Noise Margin value, to be used when hwVOPGfastSNRMarginConfProfRaModeDs is set to dynamicRa. If the downstream noise margin is below this value, and stays below it for more than the time…	0.1 dBUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.2011.6.144.1.1.14.1.34
hwVOPGfastSNRMarginConfProfRaDsNrmUs The G.fast Upstream Down-Shift Noise Margin value, to be used when hwVOPGfastSNRMarginConfProfRaModeUs is set to dynamicRa. If the upstream noise margin is below this value, and stays below it for more than the time spe…	0.1 dBUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.2011.6.144.1.1.14.1.35
hwVOPGfastSNRMarginConfProfUsTimeDs The G.fast Downstream Up-Shift Time Interval, to be used when hwVOPGfastSNRMarginConfProfRaModeDs is set to dynamicRa. The interval of time that the downstream noise margin should stay above the Downstream Up-Shift Nois…	secondsUnsigned32r/w Constraints: range: 0-16383	.1.3.6.1.4.1.2011.6.144.1.1.14.1.36
hwVOPGfastSNRMarginConfProfUsTimeUs The G.fast Upstream Up-Shift Time Interval, to be used when hwVOPGfastSNRMarginConfProfRaModeUs is set to dynamicRa. The interval of time the upstream noise margin should stay above the Upstream Up-Shift Noise Margin be…	secondsUnsigned32r/w Constraints: range: 0-16383	.1.3.6.1.4.1.2011.6.144.1.1.14.1.37
hwVOPGfastSNRMarginConfProfDsTimeDs The G.fast Downstream Downshift Time Interval, to be used when hwVOPGfastSNRMarginConfProfRaModeDs is set to dynamicRa. The interval of time the downstream noise margin should stay below the Downstream Down-Shift Noise …	secondsUnsigned32r/w Constraints: range: 0-16383	.1.3.6.1.4.1.2011.6.144.1.1.14.1.38
hwVOPGfastSNRMarginConfProfDsTimeUs The Upstream Down-Shift Time Interval, to be used when hwVOPGfastSNRMarginConfProfRaModeUs is set to dynamicRa. The interval of time the upstream noise margin should stay below the Upstream Down-Shift Noise Margin befor…	secondsUnsigned32r/w Constraints: range: 0-16383	.1.3.6.1.4.1.2011.6.144.1.1.14.1.39
hwVOPGfastSNRMarginConfProfTaretSnrmRmcDs Defines the downstream RMC noise margin that the FTU-R receiver shall achieve, relative to the BER requirement, or better, to successfully complete initialization. The target noise margin ranges from 0 to 310 units of …	0.1 dBUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.2011.6.144.1.1.14.1.40
hwVOPGfastSNRMarginConfProfTaretSnrmRmcUs Defines the upstream RMC noise margin that the FTU-O receiver shall achieve, relative to the BER requirement, or better, to successfully complete initialization. The target noise margin ranges from 0 to 310 units of 0.…	0.1 dBUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.2011.6.144.1.1.14.1.41
hwVOPGfastSNRMarginConfProfMinSnrmRmcDs Defines the downstream minimum noise margin the FTU-R receiver tolerates for the RMC. If the downstream RMC noise margin falls below this level, the FTU-R initiates the RPA procedure. The minimum noise margin ranges fr…	0.1 dBUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.2011.6.144.1.1.14.1.42
hwVOPGfastSNRMarginConfProfMinSnrmRmcUs Defines the upstream minimum noise margin the FTU-O receiver tolerates for the RMC. If the downstream RMC noise margin falls below this level, the FTU-O initiates the RPA procedure. The minimum noise margin ranges from…	0.1 dBUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.2011.6.144.1.1.14.1.43
hwVOPGfastSNRMarginConfProfMaxBLRmcDs Defines the maximum allowed bit-loading for the downstream RMC sub-carriers.	Unsigned32r/w Constraints: range: 2-6	.1.3.6.1.4.1.2011.6.144.1.1.14.1.44
hwVOPGfastSNRMarginConfProfMaxBLRmcUs Defines the maximum allowed bit-loading for the upstream RMC sub-carriers.	Unsigned32r/w Constraints: range: 2-6	.1.3.6.1.4.1.2011.6.144.1.1.14.1.45

The INP-Delay parameters for each pair of upstream and downstream channels will be in
an INP-Delay Profile. To cover all possibilities there will be 4 indices in the vector for
INP-Delay Profiles. If less than the maximum number of channels is to be used then the
scalars corresponding to non-required channels MUST be set to a null value (0).
Entries in this table MUST be maintained in a persistent manner.
A default profile with an index of '1' will always exist and its parameters will be set to
vendor-specific values, unless otherwise specified in this document.
The index of this table is hwVOPINPDelayConfProfIndex.

hwVOPINPDelayConfProfEntry row .1.3.6.1.4.1.2011.6.144.1.1.16.1

The INP-Delay parameters for each pair of upstream and downstream channels will be in
an INP-Delay Profile. To cover all possibilities there will be 4 indices in the vector for
INP-Delay Profiles. If less than the maxim…

Indexes

hwVOPINPDelayConfProfIndex

Column	Syntax	OID
hwVOPINPDelayConfProfIndex The hwVOPINPDelayConfProfIndex identifies a row in the hwVOPINPDelayConfProfTable.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2011.6.144.1.1.16.1.1
hwVOPINPDelayConfProfRowStatus This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. Before a profile can be deleted or taken out of service (by settin…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.144.1.1.16.1.2
hwVOPINPDelayConfProfDescription The hwVOPINPDelayConfProfDescription contains an optional human readable description for the profile.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.2011.6.144.1.1.16.1.3
hwVOPINPDelayConfProfMinProtectionDs If retransmission is not used in downstream direction, this parameter specifies the minimum impulse noise protection for the downstream bearer channel if it is transported over DMT symbols with a subcarrier spacing of…	symbolsXdsl2SymbolProtectionr/w Type Values: 1 noProtection 2 halfSymbol 3 singleSymbol 4 twoSymbols 5 threeSymbols 6 fourSymbols 7 fiveSymbols 8 sixSymbols 9 sevenSymbols 10 eightSymbols 11 nineSymbols 12 tenSymbols 13 elevenSymbols 14 twelveSymbols 15 thirteeSymbols 16 fourteenSymbols 17 fifteenSymbols 18 sixteenSymbols	.1.3.6.1.4.1.2011.6.144.1.1.16.1.4
hwVOPINPDelayConfProfMinProtection8Ds If retransmission is not used in downstream direction, this parameter specifies the minimum impulse noise protection for the downstream bearer channel if it is transported over DMT symbols with a subcarrier spacing of…	symbolsXdsl2SymbolProtection8r/w Type Values: 1 noProtection 2 singleSymbol 3 twoSymbols 4 threeSymbols 5 fourSymbols 6 fiveSymbols 7 sixSymbols 8 sevenSymbols 9 eightSymbols 10 nineSymbols 11 tenSymbols 12 elevenSymbols 13 twelveSymbols 14 thirteeSymbols 15 fourteenSymbols 16 fifteenSymbols 17 sixteenSymbols	.1.3.6.1.4.1.2011.6.144.1.1.16.1.5
hwVOPINPDelayConfProfMaxDelayDs If retransmission is not used in downstream direction, this parameter is the maximum one-way interleaving delay introduced by the PMS-TC on downstream direction. The xTUs shall choose the S (factor) and D(depth) values…	millisecondsUnsigned32r/w Constraints: range: 0-63 range: 255-255	.1.3.6.1.4.1.2011.6.144.1.1.16.1.6
hwVOPINPDelayConfProfMinProtectionUs If retransmission is not used in upstream direction, this parameter specifies the minimum impulse noise protection for the upstream bearer channel if it is transported over DMT symbols with a subcarrier spacing of 4.3…	symbolsXdsl2SymbolProtectionr/w Type Values: 1 noProtection 2 halfSymbol 3 singleSymbol 4 twoSymbols 5 threeSymbols 6 fourSymbols 7 fiveSymbols 8 sixSymbols 9 sevenSymbols 10 eightSymbols 11 nineSymbols 12 tenSymbols 13 elevenSymbols 14 twelveSymbols 15 thirteeSymbols 16 fourteenSymbols 17 fifteenSymbols 18 sixteenSymbols	.1.3.6.1.4.1.2011.6.144.1.1.16.1.7
hwVOPINPDelayConfProfMinProtection8Us If retransmission is not used in upstream direction, this parameter specifies the minimum impulse noise protection for the upstream bearer channel if it is transported over DMT symbols with a subcarrier spacing of 8.6…	symbolsXdsl2SymbolProtection8r/w Type Values: 1 noProtection 2 singleSymbol 3 twoSymbols 4 threeSymbols 5 fourSymbols 6 fiveSymbols 7 sixSymbols 8 sevenSymbols 9 eightSymbols 10 nineSymbols 11 tenSymbols 12 elevenSymbols 13 twelveSymbols 14 thirteeSymbols 15 fourteenSymbols 16 fifteenSymbols 17 sixteenSymbols	.1.3.6.1.4.1.2011.6.144.1.1.16.1.8
hwVOPINPDelayConfProfMaxDelayUs If retransmission is not used in upstream direction, this parameter is the maximum one-way interleaving delay introduced by the PMS-TC on upstream direction. The xTUs shall choose the S (factor) and D(depth) values suc…	millisecondsUnsigned32r/w Constraints: range: 0-63 range: 255-255	.1.3.6.1.4.1.2011.6.144.1.1.16.1.9
hwVOPINPDelayConfProfMaxDelayVar This optional VDSL2 specific parameter specifies the maximum value for the delay variation allowed in an OLR procedure. It is ranges from 1 to 254 units of 0.1 milliseconds (i.e., 0.1 to 25.4 milliseconds) with the spec…	0.1 millisecondsUnsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.2011.6.144.1.1.16.1.10
hwVOPINPDelayConfProfInitPolicy If retransmission is not used in a given transmit direction, this parameter indicates which policy shall be applied to determine the transceiver configuration parameters at initialization. The valid values for CIPOLICY…	Xdsl2ChInitPolicyr/w Type Values: 1 policy0 2 policy1 3 policy2	.1.3.6.1.4.1.2011.6.144.1.1.16.1.11
hwVOPINPDelayConfProfMaxDelayRtxDs If retransmission is used in downstream direction, this parameter specifies the maximum for the instantaneous delay due to the effect of retransmission only (see G.998.4 for detailed specification). The delay ranges f…	millisecondsUnsigned32r/w Constraints: range: 1-63	.1.3.6.1.4.1.2011.6.144.1.1.16.1.12
hwVOPINPDelayConfProfMaxDelayRtxUs If retransmission is used in upstream direction, this parameter specifies the maximum for the instantaneous delay due to the effect of retransmission only (see G.998.4 for detailed specification). The delay ranges fro…	millisecondsUnsigned32r/w Constraints: range: 1-63	.1.3.6.1.4.1.2011.6.144.1.1.16.1.13
hwVOPINPDelayConfProfMinDelayRtxDs If retransmission is used in downstream direction, this parameter specifies the minimum for the instantaneous delay due to the effect of retransmission only (see G.998.4 for detailed specification). The delay ranges f…	millisecondsUnsigned32r/w Constraints: range: 0-63	.1.3.6.1.4.1.2011.6.144.1.1.16.1.14
hwVOPINPDelayConfProfMinDelayRtxUs If retransmission is used in upstream direction, this parameter specifies the minimum for the instantaneous delay due to the effect of retransmission only (see G.998.4 for detailed specification). The delay ranges fro…	millisecondsUnsigned32r/w Constraints: range: 0-63	.1.3.6.1.4.1.2011.6.144.1.1.16.1.15
hwVOPINPDelayConfProfMinInpShineRtxDs If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of …	symbolsUnsigned32r/w Constraints: range: 0-63	.1.3.6.1.4.1.2011.6.144.1.1.16.1.16
hwVOPINPDelayConfProfMinInpShineRtxUs If retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 4.…	symbolsUnsigned32r/w Constraints: range: 0-63	.1.3.6.1.4.1.2011.6.144.1.1.16.1.17
hwVOPINPDelayConfProfMinInp8ShineRtxDs If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of …	symbolsUnsigned32r/w Constraints: range: 0-127	.1.3.6.1.4.1.2011.6.144.1.1.16.1.18
hwVOPINPDelayConfProfMinInp8ShineRtxUs If retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 8.…	symbolsUnsigned32r/w Constraints: range: 0-127	.1.3.6.1.4.1.2011.6.144.1.1.16.1.19
hwVOPINPDelayConfProfShineRatioRtxDs If retransmission is used in downstream direction, this parameter specifies the SHINE ratio (detailed definition see G.998.4). The values range from 0 to 0.100 in increments of 0.001.	Unsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.6.144.1.1.16.1.20
hwVOPINPDelayConfProfShineRatioRtxUs If retransmission is used in upstream direction, this parameter specifies the SHINE ratio (detailed definition see G.998.4). The values range from 0 to 0.100 in increments of 0.001.	Unsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.6.144.1.1.16.1.21
hwVOPINPDelayConfProfMinInpReinRtxDs If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 4…	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.6.144.1.1.16.1.22
hwVOPINPDelayConfProfMinInpReinRtxUs If retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 4.3…	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.6.144.1.1.16.1.23
hwVOPINPDelayConfProfMinInp8ReinRtxDs If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 8…	Unsigned32r/w Constraints: range: 0-13	.1.3.6.1.4.1.2011.6.144.1.1.16.1.24
hwVOPINPDelayConfProfMinInp8ReinRtxUs If retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 8.6…	Unsigned32r/w Constraints: range: 0-13	.1.3.6.1.4.1.2011.6.144.1.1.16.1.25
hwVOPINPDelayConfProfIatReinRtxDs If retransmission is used in downstream direction, this parameter specifies the inter-arrival time that shall be assumed for REIN protection. Options: 1. frequency100Hz(0) - an inter-arrival time derived from a REIN …	Enumerationr/w Enumerated Values: 0 frequency100Hz 1 frequency120Hz	.1.3.6.1.4.1.2011.6.144.1.1.16.1.26
hwVOPINPDelayConfProfIatReinRtxUs If retransmission is used in upstream direction, this parameter specifies the inter-arrival time that shall be assumed for REIN protection. Options: 1. frequency100Hz(0) - an inter-arrival time derived from a REIN a…	Enumerationr/w Enumerated Values: 0 frequency100Hz 1 frequency120Hz	.1.3.6.1.4.1.2011.6.144.1.1.16.1.27
hwVOPINPDelayConfProfMaxDelayOctetSplit The line configuration parameter MAXDELAYOCTET-split (MDOSPLIT) defines the percentage of the MAXDELAYOCTET_ext if operating in ITU-T G.998.4 or MAXDELAYOCTET in other cases allocated to the downstream direction. All o…	percentsUnsigned32r/w Constraints: range: 0-100 range: 255-255	.1.3.6.1.4.1.2011.6.144.1.1.16.1.28
hwVOPGfastINPDelayConfProfMaxDelayRtxDs This parameter specifies the G.fast downstream maximum allowed delay for retransmission. The delay values range from 1 to 63 ms in steps of 0.25 ms. Unit: 0.25 milliseconds.	0.25 millisecondsUnsigned32r/w Constraints: range: 4-252	.1.3.6.1.4.1.2011.6.144.1.1.16.1.29
hwVOPGfastINPDelayConfProfMaxDelayRtxUs This parameter specifies the G.fast upstream maximum allowed delay for retransmission. The delay values range from 1 to 63 ms in steps of 0.25 ms. Unit: 0.25 milliseconds.	0.25 millisecondsUnsigned32r/w Constraints: range: 4-252	.1.3.6.1.4.1.2011.6.144.1.1.16.1.30
hwVOPGfastINPDelayConfProfMinInpShineRtxDs This parameter specifies the G.fast downstream minimum impulse noise protection against SHINE for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 51.75 kHz. The impulse noise prot…	symbolsUnsigned32r/w Constraints: range: 0-520	.1.3.6.1.4.1.2011.6.144.1.1.16.1.31
hwVOPGfastINPDelayConfProfMinInpShineRtxUs This parameter specifies the G.fast upstream minimum impulse noise protection against SHINE for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 51.75 kHz. The impulse noise protec…	symbolsUnsigned32r/w Constraints: range: 0-520	.1.3.6.1.4.1.2011.6.144.1.1.16.1.32
hwVOPGfastINPDelayConfProfShineRatioRtxDs This parameter specifies the G.fast downstream SHINE ratio. The values range from 0 to 0.1 in increments of 0.001.	Unsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.6.144.1.1.16.1.33
hwVOPGfastINPDelayConfProfShineRatioRtxUs This parameter specifies the G.fast upstream SHINE ratio. The values range from 0 to 0.1 in increments of 0.001.	Unsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.6.144.1.1.16.1.34
hwVOPGfastINPDelayConfProfMinInpReinRtxDs This parameter specifies the G.fast downstream minimum impulse noise protection against REIN for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 51.75 kHz. The impulse noise prote…	Unsigned32r/w Constraints: range: 0-63	.1.3.6.1.4.1.2011.6.144.1.1.16.1.35
hwVOPGfastINPDelayConfProfMinInpReinRtxUs This parameter specifies the G.fast upstream minimum impulse noise protection against REIN for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 51.75 kHz. The impulse noise protect…	Unsigned32r/w Constraints: range: 0-63	.1.3.6.1.4.1.2011.6.144.1.1.16.1.36
hwVOPGfastINPDelayConfProfIatReinRtxDs This parameter specifies the G.fast downstream inter-arrival time that shall be assumed for REIN protection. Options: 1. frequency100Hz(0) - an inter-arrival time derived from a REIN at 100 Hz 2. frequency120Hz(1) -…	Enumerationr/w Enumerated Values: 0 frequency100Hz 1 frequency120Hz 2 frequency300Hz 3 frequency360Hz	.1.3.6.1.4.1.2011.6.144.1.1.16.1.37
hwVOPGfastINPDelayConfProfIatReinRtxUs This parameter specifies the G.fast upstream inter-arrival time that shall be assumed for REIN protection. Options: 1. frequency100Hz(0) - an inter-arrival time derived from a REIN at 100 Hz 2. frequency120Hz(1) - a…	Enumerationr/w Enumerated Values: 0 frequency100Hz 1 frequency120Hz 2 frequency300Hz 3 frequency360Hz	.1.3.6.1.4.1.2011.6.144.1.1.16.1.38
hwVOPGfastINPDelayConfProfMinRNRatioRtxDs This parameter specifies the G.fast downstream minimum Reed-Solomon RFEC/NFEC ratio. The ratio is computed as the number of redundancy bytes (RFEC) divided by the total number of bytes (NFEC) in each Reed-Solomon code…	Unsigned32r/w Constraints: range: 0-8	.1.3.6.1.4.1.2011.6.144.1.1.16.1.39
hwVOPGfastINPDelayConfProfMinRNRatioRtxUs This parameter specifies the G.fast upstream minimum Reed-Solomon RFEC/NFEC ratio. The ratio is computed as the number of redundancy bytes (RFEC) divided by the total number of bytes (NFEC) in each Reed-Solomon codewor…	Unsigned32r/w Constraints: range: 0-8	.1.3.6.1.4.1.2011.6.144.1.1.16.1.40

The Virtual Noise Profile MUST contain the virtual noise PSDs.
A Virtual Noise PSD is not used if the corresponding SNRMODE parameters (hwVOPSNRMarginConfProfMaxSnrmDs,
hwVOPSNRMarginConfProfRaModeUs) are set to 0.
The SNRMODE parameters for upstream and downstream are in the hwVOPSNRMarginConfProfTable.
Entries in this table MUST be maintained in a persistent manner.
A default profile with an index of '1' will always exist and its parameters will be set to
vendor-specific values, unless otherwise specified in this document.
The index of this table is hwVOPVirtualNoiseConfProfIndex.

hwVOPVirtualNoiseConfProfEntry row .1.3.6.1.4.1.2011.6.144.1.1.18.1

The Virtual Noise Profile MUST contain the virtual noise PSDs.
A Virtual Noise PSD is not used if the corresponding SNRMODE parameters (hwVOPSNRMarginConfProfMaxSnrmDs,
hwVOPSNRMarginConfProfRaModeUs) are set to 0.
The …

Indexes

hwVOPVirtualNoiseConfProfIndex

Column	Syntax	OID
hwVOPVirtualNoiseConfProfIndex The hwVOPVirtualNoiseConfProfIndex identifies a row in the hwVOPVirtualNoiseConfProfTable.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2011.6.144.1.1.18.1.1
hwVOPVirtualNoiseConfProfRowStatus This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. Before a profile can be deleted or taken out of service (by settin…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.144.1.1.18.1.2
hwVOPVirtualNoiseConfProfDescription The hwVOPVirtualNoiseConfProfDescription contains an optional human readable description for the profile.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.2011.6.144.1.1.18.1.3
hwVOPVirtualNoiseConfProfTxRefVnDs This configuration parameter defines the downstream transmitter referred virtual noise. The TXREFVNds shall be specified through a set of breakpoints. Each breakpoint shall consist of a subcarrier index t, with a subcar…	Xdsl2LineTxRefVnDsr/w Type Constraints: range: 0..96	.1.3.6.1.4.1.2011.6.144.1.1.18.1.4
hwVOPVirtualNoiseConfProfTxRefVnUs This configuration parameter defines the upstream transmitter referred virtual noise. The TXREFVNus shall be specified through a set of breakpoints. Each breakpoint shall consist of a subcarrier index t, with a subcarri…	Xdsl2LineTxRefVnUsr/w Type Constraints: range: 0..48	.1.3.6.1.4.1.2011.6.144.1.1.18.1.5

Impulse Noise Monitoring(INM) is not required for modem operation but is a capability for
the measurement of Impulse Noise. The INM Profile includes the option to control an INM
function on the receive direction in the xTU. A downstream Impulse Noise Monitor applies
to the xTU-R; an upstream Impulse Noise Monitor applies to the xTU-C.
If INM is not implemented, the relevant profile pointer within the xDSL Line Configuration
Vector instance MUST be set to a null value(0).
A default profile with an index of '1' will always exist and its parameters will be set to
vendor-specific values, unless otherwise specified in this document.
The index of this table is hwVOPINMConfProfIndex.

hwVOPINMConfProfEntry row .1.3.6.1.4.1.2011.6.144.1.1.20.1

Impulse Noise Monitoring(INM) is not required for modem operation but is a capability for
the measurement of Impulse Noise. The INM Profile includes the option to control an INM
function on the receive direction in the …

Indexes

hwVOPINMConfProfIndex

Column	Syntax	OID
hwVOPINMConfProfIndex The hwVOPINMConfProfIndex identifies a row in the hwVOPINMConfProfTable.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2011.6.144.1.1.20.1.1
hwVOPINMConfProfRowStatus This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. Before a profile can be deleted or taken out of service (by settin…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.144.1.1.20.1.2
hwVOPINMConfProfDescription The hwVOPINMConfProfDescription contains an optional human readable description for the profile.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.2011.6.144.1.1.20.1.3
hwVOPINMConfProfInmIatoDs The parameter of downstream impulse noise monitoring inter arrival time offset. This is the Inter Arrival Time Offset that the xTU receiver shall use to determine in which bin of the Inter Arrival Time histogram the IA…	Unsigned32r/w Constraints: range: 3-511	.1.3.6.1.4.1.2011.6.144.1.1.20.1.4
hwVOPINMConfProfInmIatsDs The parameter of downstream impulse noise monitoring inter arrival time step. This is the Inter Arrival Time Step that the xTU receiver shall use to determine in which bin of the Inter Arrival Time histogram the IAT is…	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.6.144.1.1.20.1.5
hwVOPINMConfProfInmCcDs The parameter of Downstream impulse noise monitoring cluster continuation value. This is the Cluster Continuation value that the xTU receiver shall use in the cluster indication process described in the relevant ITU-T …	Unsigned32r/w Constraints: range: 0-64	.1.3.6.1.4.1.2011.6.144.1.1.20.1.6
hwVOPINMConfProfInmInpeqModeDs The parameter of Downstream impulse noise monitoring equivalent impulse noise protect mode. This is the INM Equivalent INP Mode that the xTU receiver shall use in the computation of the Equivalent INP, as defined in th…	Unsigned32r/w Constraints: range: 0-4	.1.3.6.1.4.1.2011.6.144.1.1.20.1.7
hwVOPINMConfProfInmIatoUs The parameter of upstream impulse noise monitoring inter arrival time offset. This is the Inter Arrival Time Offset that the xTU receiver shall use to determine in which bin of the Inter Arrival Time histogram the IAT …	Unsigned32r/w Constraints: range: 3-511	.1.3.6.1.4.1.2011.6.144.1.1.20.1.8
hwVOPINMConfProfInmIatsUs The parameter of upstream impulse noise monitoring inter arrival time step. This is the Inter Arrival Time Step that the xTU receiver shall use to determine in which bin of the Inter Arrival Time histogram the IAT is r…	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.6.144.1.1.20.1.9
hwVOPINMConfProfInmCcUs The parameter of upstream impulse noise monitoring cluster continuation value. This is the Cluster Continuation value that the xTU receiver shall use in the cluster indication process described in the relevant ITU-T Re…	Unsigned32r/w Constraints: range: 0-64	.1.3.6.1.4.1.2011.6.144.1.1.20.1.10
hwVOPINMConfProfInmInpeqModeUs The parameter of upstream impulse noise monitoring equivalent impulse noise protect mode. This is the INM Equivalent INP Mode that the xTU receiver shall use in the computation of the Equivalent INP, as defined in the …	Unsigned32r/w Constraints: range: 0-4	.1.3.6.1.4.1.2011.6.144.1.1.20.1.11

Save our Showtime (SOS) provides the receiver with a means to rapidly perform a bit loading
reduction in a specified part of the frequency spectrum. This can be used in case of sudden 
noise increases. The SOS Profile provides the parameters to configure the optional procedure
for on-line reconfiguration of the Physical Media Dependent (PMD) sub-layer in VDSL2 operation 
mode. If the SOS procedure is not utilized the relevant profile pointer within the xDSL Line 
Configuration Vector instance MUST be set to a null value (0).
A default profile with an index of '1' will always exist and its parameters will be set to
vendor-specific values, unless otherwise specified in this document.
The index of this table is hwVOPSosConfProfIndex.

hwVOPSosConfProfEntry row .1.3.6.1.4.1.2011.6.144.1.1.22.1

Save our Showtime (SOS) provides the receiver with a means to rapidly perform a bit loading
reduction in a specified part of the frequency spectrum. This can be used in case of sudden
noise increases. The SOS Profile p…

Indexes

hwVOPSosConfProfIndex

Column	Syntax	OID
hwVOPSosConfProfIndex The hwVOPSosConfProfIndex identifies a row in the hwVOPSosConfProfTable.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2011.6.144.1.1.22.1.1
hwVOPSosConfProfRowStatus This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. Before a profile can be deleted or taken out of service (by settin…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.144.1.1.22.1.2
hwVOPSosConfProfDescription The hwVOPSosConfProfDescription contains an optional human readable description for the profile.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.2011.6.144.1.1.22.1.3
hwVOPSosConfProfSosTimeDs The parameter is used in the specification of the receiver initiated SOS. If the value of this parameter is not zero, the standard SOS triggering criteria are enabled, and the value corresponds with duration of the ti…	64msUnsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.6.144.1.1.22.1.4
hwVOPSosConfProfSosTimeUs The parameter is used in the specification of the receiver initiated SOS. If the value of this parameter is not zero, the standard SOS triggering criteria are enabled, and the value corresponds with duration of the ti…	64msUnsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.6.144.1.1.22.1.5
hwVOPSosConfProfSosNtonesDs This parameter is defined as the minimum percentage of tones in the downstream MEDLEY SET that must be degraded in order to arm the first sub-condition of the standard SOS triggering criteria in the downstream directi…	Unsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.6.144.1.1.22.1.6
hwVOPSosConfProfSosNtonesUs This parameter is defined as the minimum percentage of tones in the upstream MEDLEY SET that must be degraded in order to arm the first sub-condition of the standard SOS triggering criteria in the downstream direction…	Unsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.6.144.1.1.22.1.7
hwVOPSosConfProfSosCrcDs This parameter is defined as the minimum number of normalized CRC anomalies received in SOS-TIME-ds seconds in order to arm the second sub-condition of the standard SOS triggering criteria in the downstream direction…	0.02Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2011.6.144.1.1.22.1.8
hwVOPSosConfProfSosCrcUs This parameter is defined as the minimum number of normalized CRC anomalies received in SOS-TIME-ds seconds in order to arm the second sub-condition of the standard SOS triggering criteria in the upstream direction. …	0.02Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2011.6.144.1.1.22.1.9
hwVOPSosConfProfMaxSosDs This parameter is used in G.993.2 de-activation. If the number of successful SOS procedures in the downstream direction performed within a 120-second interval exceeds MAX-SOS-ds, the modem shall transition to the L3 s…	Unsigned32r/w Constraints: range: 0-15	.1.3.6.1.4.1.2011.6.144.1.1.22.1.10
hwVOPSosConfProfMaxSosUs This parameter is used in G.993.2 de-activation. If the number of successful SOS procedures in the upstream direction performed within a 120-second interval exceeds MAX-SOS-ds, the modem shall transition to the L3 sta…	Unsigned32r/w Constraints: range: 0-15	.1.3.6.1.4.1.2011.6.144.1.1.22.1.11
hwVOPSosConfProfSnrmoffsetRocDs The parameter is defined as the SNR Margin offset for the ROC channel in the downstream direction. The parameter is used in the specification of the Channel Initialization Policy (see 12.3.7.1/G.993.2). The valid range …	0.1dBUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.2011.6.144.1.1.22.1.12
hwVOPSosConfProfSnrmoffsetRocUs The parameter is defined as the SNR Margin offset for the ROC channel in the upstream direction. The parameter is used in the specification of the Channel Initialization Policy (see 12.3.7.1/G.993.2). The valid range of…	0.1dBUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.2011.6.144.1.1.22.1.13
hwVOPSosConfProfInpminRocDs This parameter contains the minimum impulse noise protection to apply on the ROC in the downstream direction. The minimum impulse noise protection is an integer ranging from 0 to 16.	Unsigned32r/w Constraints: range: 0-16	.1.3.6.1.4.1.2011.6.144.1.1.22.1.14
hwVOPSosConfProfInpminRocUs This parameter contains the minimum impulse noise protection to apply on the robust ROC in the upstream direction. The minimum impulse noise protection is an integer ranging from 0 to 16.	Unsigned32r/w Constraints: range: 0-16	.1.3.6.1.4.1.2011.6.144.1.1.22.1.15
hwVOPGfastSosConfProfFraTimeDs The parameter is used in the specification of the receiver initiated FRA. If the value of this parameter is not zero, the standard FRA triggering criteria are enabled, and the value corresponds with duration of the ti…	1 logical frame lengthUnsigned32r/w Constraints: range: 0-12	.1.3.6.1.4.1.2011.6.144.1.1.22.1.16
hwVOPGfastSosConfProfFraTimeUs The parameter is used in the specification of the receiver initiated FRA. If the value of this parameter is not zero, the standard FRA triggering criteria are enabled, and the value corresponds with duration of the ti…	1 logical frame lengthUnsigned32r/w Constraints: range: 0-12	.1.3.6.1.4.1.2011.6.144.1.1.22.1.17
hwVOPGfastSosConfProfFraNtonesDs This parameter is defined as the minimum percentage of tones that must be degraded in order to arm the first sub-condition of the standard FRA triggering criteria in the downstream direction. The parameter FRA-NTONES-…	Unsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.6.144.1.1.22.1.18
hwVOPGfastSosConfProfFraNtonesUs This parameter is defined as the minimum percentage of tones that must be degraded in order to arm the first sub-condition of the standard FRA triggering criteria in the downstream direction. The parameter FRA-NTONES-…	Unsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.6.144.1.1.22.1.19
hwVOPGfastSosConfProfFraMinRtxUcDs This parameter is defined as minimum number of rtx uc anomalies received throughout a time window equal to FRA-TIME-ds in order to arm the second FRA triggering criteria in the downstream direction. The special value …	Unsigned32r/w Constraints: range: 0-1023	.1.3.6.1.4.1.2011.6.144.1.1.22.1.20
hwVOPGfastSosConfProfFraMinRtxUcUs This parameter is defined as the minimum number of rtx uc anomalies received throughout a time window equal to FRA-TIME-us in order to arm the second FRA triggering criteria in the upstream direction. The special valu…	Unsigned32r/w Constraints: range: 0-1023	.1.3.6.1.4.1.2011.6.144.1.1.22.1.21
hwVOPGfastSosConfProfFraVenDiscDs Enable or disable vendor discretionary FRA triggering criteria in the downstream direction. Options: 1. disable (1) - Disable vendor discretionary FRA triggering criteria in the downstream direction. 2. enable (2) - …	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.144.1.1.22.1.22
hwVOPGfastSosConfProfFraVenDiscUs Enable or disable vendor discretionary FRA triggering criteria in the upstream direction. Options: 1. disable (1) - Disable vendor discretionary FRA triggering criteria in the upstream direction. 2. enable (2) - Enab…	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.144.1.1.22.1.23