vdsl2LConfProfUpboPsdBand

This parameter defines the UPBO reference PSD used to compute the upstream power back-off
for each upstream band except US0. A UPBOPSD defined for each band shall consist of two 
parameters [a, b]. Parameter a shall be coded as an unsigned 12-bit number from 40 dBm/Hz
(coded as 0) to 80.95 dBm/Hz (coded as 4095) in steps of 0.01 dBm/Hz; and b shall be coded
as an unsigned 12 bit number from 0 (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps 
of 0.01 dBm/Hz. The UPBO reference PSD at the frequency f expressed in MHz shall be equal 
to '-a-b(SQRT(f))'. The set of parameter values a = 40 dBm/Hz, b = 0 dBm/Hz is a special configuration
to disable UPBO in the respective upstream band.
Octets 0+1 -   a[0]
Octets 2+3 -   b[0]
Octets 4+5 -   a[1]
Octets 6+7 -   b[1]
Octets 8+9 -   a[2]
Octets 10+11 - b[2]
 Octets 12+13 - a[3]
Octets 14+15 - b[3]

MIB

HUAWEI-VDSL2-LINE-MIB

OID

.1.3.6.1.4.1.2011.6.115.1.5.1.2.1.36

Type

column

Access

readwrite

Status

current

Parent

vdsl2LineConfProfEntry

Groups

1