hwPstnLoopTestResult
HUAWEI-NTEST-MIB ·
.1.3.6.1.4.1.2011.6.21.2.1.1.33.1.5
Object
column SNMPv2-SMIInteger32
Test status: 1. Succeed; 2. Offhook on the target subscriber port fails; 3. Offhook on the assistant subscriber port fails; 4. Onhook on the target subscriber port fails; 5. Onhook on the assistant subscriber port fails; 6. Ringing on the target subscriber port fails; 7. Stopping ringing on the target subscriber port fails; 8. Channel test 1 fails. The target subscriber port transmits the DTMF signal to the TDM side. The assistant subscriber port does not detect any corresponding DTMF signal; 9. Channel test 2 fails. The assistant subscriber port transmits the DTMF signal to the TDM side. The target subscriber port does not detect any corresponding DTMF signal; 10. Channel test 3 fails. The target subscriber port transmits the DTMF signal to the IP side. The target subscriber port does not detect any corresponding DTMF signal on the TDM side; 11. Channel 4 test 4 fails. The assistant subscriber port transmits the DTMF signal to the IP side. The assistant subscriber port does not detect any corresponding DTMF signal on the TDM side; 12. Waiting for the dialing tone on the assistant subscriber port fails; 13. Waiting for the ringing on the target subscriber port fails; 14. The system fails due to abnormity; 15. The test stops because the tested subscriber port is busy; 16. The test stops because the user of the tested subscriber port hooks off; 17. The voice channel test fails because of insufficient DSP resources; 18. The DSP network function test fails (the turn around function is enabled); 19. The DSP network function test fails; 20. The codec loopback is successful, the SLIC loopback fails, and the SLIC chip is faulty; 21. The TDM loopback is successful, the codec loopback and SLIC loopback fail, and the codec chip, the SLIC chip, or the HighWay bus is faulty; 22. The DSP is faulty and the DSP TDM loopback fails; 23. The codec loopback fails and the codec chip is faulty.
Context
- MIB
- HUAWEI-NTEST-MIB
- OID
.1.3.6.1.4.1.2011.6.21.2.1.1.33.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwPstnLoopTestOprEntry
Net-SNMP examples
How SNMP and these commands workWalk the column to discover its indexed instances, or supply every index to read one instance.
Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTEST-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTEST-MIB::hwPstnLoopTestResult'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'HUAWEI-NTEST-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTEST-MIB::hwPstnLoopTestResult.<hwPstnLoopTestSerialNo>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'HUAWEI-NTEST-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HUAWEI-NTEST-MIB::hwPstnLoopTestResult'
Syntax
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647