HUAWEI-NTEST-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
30
Rows
30
Columns
335

hwPstnCircuitTestOprTable

table
.1.3.6.1.4.1.2011.6.21.2.1.1.1 · 1 row entry · 34 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPstnCircuitTestOprTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTEST-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTEST-MIB::hwPstnCircuitTestOprTable' 
Operation table for the PSTN subscriber circuit test:
It realizes the function of the circuit test for analog subscribers in the system. The circuit test helps you to ensure that the service board can provide the functions such as ringing, feeder, and dial tone. The circuit test also helps you to ensure that the parameters such as the feeder voltage and ringing current voltage are normal.
This function facilitates the maintenance of the subscriber circuits, especially the internal circuits of the service boards.
The index of this table is ifIndex.
hwPstnCircuitTestOprEntry row .1.3.6.1.4.1.2011.6.21.2.1.1.1.1
Operation table for the PSTN subscriber circuit test:
It realizes the function of the circuit test for analog subscribers in the system. The circuit test helps you to ensure that the service board can provide the functi…
Indexes
Column Syntax OID
hwPstnCircuitTestOprType
Describes the Circuit test-Operation Type.
Options:
1. stop(1) -stop the test
2. start(2) -start the test
Enumerationr/w
Enumerated Values:
1stop
2start
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.1
hwPstnCircuitTestOffHook
Describes the Circuit test-Off hook.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.2
hwPstnCircuitTestOffHookCount
Circuit test-Off hook count
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.3
hwPstnCircuitTestDialTone
Describes the Circuit test-Dial tone.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.4
hwPstnCircuitTestReceivePulse
Describes the Circuit test-Receiving pulse.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.5
hwPstnCircuitTestReceiveDTMF
Describes the Circuit test-Receiving DTMF.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.6
hwPstnCircuitTestRingBackTone
Describes the Circuit test-Ring back tone.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.7
hwPstnCircuitTestBusyTone
Describes the Circuit test-Busy tone.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.8
hwPstnCircuitTestBatteryFeed
Describes the Circuit test-Feeder .
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.9
hwPstnCircuitTestPoleDetect
Describes the Circuit test-Polarity reversal.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.10
hwPstnCircuitTestOnHook
Describes the Circuit test-On hook.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.11
hwPstnCircuitTestRing
Describes the Circuit test-Ringing.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.12
hwPstnCircuitTestStopRing
Describes the Circuit test-Stop ringing.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.13
hwPstnCircuitTestFeedV
Describes the Circuit test-Feeder voltage.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.14
hwPstnCircuitTestRingV
Describes the Circuit test-Ringing current voltage.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.15
hwPstnCircuitTestBusyProcFlag
Describes the Circuit test-Busy control.
Options:
1. busynotest(1) -indicates no test when busy
2. busytest(2) -indicates remedy test when busy
3. busystrentest(3) -indicates forced test on busy
Enumerationr/w
Enumerated Values:
1busynotest
2busytest
3busystrentest
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.16
hwPstnCircuitTestStatus
Describes the Circuit test-Inline Test Status.
Options:
1. normal(1) -indicates normal
2. testfail(2) -indicates abnormal
3. portbusy(3) -indicates busy port
4. outoftime(4) …
Enumeration
Enumerated Values:
1normal
2testfail
3portbusy
4outoftime
5testingAbnormal
6broadbandtesting
7capturefail
8notratb
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.17
hwPstnCircuitTestOffHookResult
Describes the Circuit Test Result-Off hook.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) -indicates time out
4. nosup…
Enumeration
Enumerated Values:
1normal
2abnormal
3testouttime
4nosupport
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.18
hwPstnCircuitTestDialToneResult
Describes the Circuit Test Result-dial tone.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) -indicates time out
4. nosu…
Enumeration
Enumerated Values:
1normal
2abnormal
3testouttime
4nosupport
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.19
hwPstnCircuitTestReceivePulseResult
Describes the Circuit Test Result-Receiving pulse.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) -indicates time out
4…
Enumeration
Enumerated Values:
1normal
2abnormal
3testouttime
4nosupport
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.20
hwPstnCircuitTestReceiveDTMFResult
Describes the Circuit Test Result-Receiving DTMF.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) -indicates time out
4.…
Enumeration
Enumerated Values:
1normal
2abnormal
3testouttime
4nosupport
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.21
hwPstnCircuitTestRingBackResult
Describes the Circuit Test Result-Ring back tone.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) -indicates time out
4.…
Enumeration
Enumerated Values:
1normal
2abnormal
3testouttime
4nosupport
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.22
hwPstnCircuitTestBusyToneResult
Describes the Circuit Test Result-Busy tone.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) -indicates time out
4. nosu…
Enumeration
Enumerated Values:
1normal
2abnormal
3testouttime
4nosupport
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.23
hwPstnCircuitTestBatteryFeedResult
Describes the Circuit Test Result-Feeder.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) -indicates time out
4. nosuppo…
Enumeration
Enumerated Values:
1normal
2abnormal
3testouttime
4nosupport
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.24
hwPstnCircuitTestPoleDetectResult
Describes the Circuit Test Result-Polarity reversal.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) -indicates time out
…
Enumeration
Enumerated Values:
1normal
2abnormal
3testouttime
4nosupport
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.25
hwPstnCircuitTestOnHookResult
Describes the Circuit Test Result-On hook.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) -indicates time out
4. nosupp…
Enumeration
Enumerated Values:
1normal
2abnormal
3testouttime
4nosupport
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.26
hwPstnCircuitTestRingResult
Describes the Circuit Test Result-Ringing.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) -indicates time out
4. nosupp…
Enumeration
Enumerated Values:
1normal
2abnormal
3testouttime
4nosupport
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.27
hwPstnCircuitTestStopRingResult
Describes the Circuit Test Result-Stop ringing.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) -indicates time out
4. n…
Enumeration
Enumerated Values:
1normal
2abnormal
3testouttime
4nosupport
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.28
hwPstnCircuitTestFeedVValue
Describes the Circuit Test Result-Feeder voltage.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.29
hwPstnCircuitTestFeedVResult
Describes the Circuit Test Result-Feeder voltage Result.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
Enumeration
Enumerated Values:
1normal
2abnormal
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.30
hwPstnCircuitTestRingVValue
Describes the Circuit Test Result-Ringing current voltage.
Unit: millivolt, ab. mV
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.31
hwPstnCircuitTestRingVResult
Describes the Circuit Test Result-Ringing current voltage Result.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
Enumeration
Enumerated Values:
1normal
2abnormal
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.32
hwPstnCircuitTestLoopCurrentValue
Describes the Circuit Test Result-Loop current.
Unit: microampere, ab. uA
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.33
hwPstnCircuitTestLoopCurrentResult
Describes the Circuit Test Result-Loop current Result.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
Enumeration
Enumerated Values:
1normal
2abnormal
 .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.34

hwIsdnUserInTestOprTable

table
.1.3.6.1.4.1.2011.6.21.2.1.1.2 · 1 row entry · 18 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIsdnUserInTestOprTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTEST-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTEST-MIB::hwIsdnUserInTestOprTable' 
Describes the Operation table for the ISDN subscriber circuit test:       
It realizes the function of the circuit test for ISDN subscribers in the system. In the circuit test, the status (activated, deactivated) of the LT U port, LT power supply voltage, LT power supply overflow auto protection, manual switch-off line feeding voltage, and manual switch-on line feeding voltage are measured.
The test result shows whether the ISDN subscriber circuit works in the normal state.
The index of this table is ifIndex.
hwIsdnUserInTestOprEntry row .1.3.6.1.4.1.2011.6.21.2.1.1.2.1
Describes the Operation table for the ISDN subscriber circuit test:
It realizes the function of the circuit test for ISDN subscribers in the system. In the circuit test, the status (activated, deactivated) of the…
Indexes
Column Syntax OID
hwIsdnUserInTestOprType
Describes the Operation type.
Options:
1. stop(1) -stop the test
2. start(2) -start the test
Enumerationr/w
Enumerated Values:
1stop
2start
 .1.3.6.1.4.1.2011.6.21.2.1.1.2.1.1
hwIsdnUserInTestActive
Describes the ISDN subscriber circuit test-Active.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.2.1.2
hwIsdnUserInTestDeactive
Describes the ISDN circuit test-Deactive.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.2.1.3
hwIsdnUserInTestLtSupplyPowerVol
Describes the ISDN circuit test-LT supply power.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.2.1.4
hwIsdnUserInTestLtCurrentProctect
Describes the ISDN circuit test-LT power supply overflow auto protection .
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.2.1.5
hwIsdnUserInTestCutLineVol
Describes the ISDN circuit test-Manual switch-off line feeding voltage.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.2.1.6
hwIsdnUserInTestSwitchOnVol
Describes the ISDN circuit test-Manual switch-on line feeding voltage .
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.2.1.7
hwIsdnUserInTestBusyProcFlag
Describes the Busy control flag .
Options:
1. busynotest(1) -no test when busy
2. busytest(2) -remedy test when busy
3. busystrentest(3) -forced test on busy
Enumerationr/w
Enumerated Values:
1busynotest
2busytest
3busystrentest
 .1.3.6.1.4.1.2011.6.21.2.1.1.2.1.8
hwIsdnUserInTestStatus
Describes the Test status .
Options:
1. normal(1) -indicates normal
2. abnormal(2) -indicates abnormal
3. portbusy(3) -indicates busy port
4. outoftime(4) -indicates t…
Enumeration
Enumerated Values:
1normal
2abnormal
3portbusy
4outoftime
5testingAbnormal
 .1.3.6.1.4.1.2011.6.21.2.1.1.2.1.9
hwIsdnUserInTestActiveResult
Describes the Activation result .
Options:
1. normal(1) -indicates normal
2. abnormal(2) -indicates abnormal
3. outOfTime(3) -indicates timed-out
4. note…
Enumeration
Enumerated Values:
1normal
2abnormal
3outOfTime
4notest
 .1.3.6.1.4.1.2011.6.21.2.1.1.2.1.10
hwIsdnUserInTestDeactiveResult
Describes the Deactivation result.
Options:
1. normal(1) -indicates normal
2. abnormal(2) -indicates abnormal
3. outoftime(3) -indicates timed-out
4. not…
Enumeration
Enumerated Values:
1normal
2abnormal
3outoftime
4notest
 .1.3.6.1.4.1.2011.6.21.2.1.1.2.1.11
hwIsdnUserInTestLtSupplyPowerCap
LT power supply voltage
Unit: millivolt
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.2.1.12
hwIsdnUserInTestLtSupplyPowerCapResult
Describes the Test result-LT power supply voltage.
Options:
1. normal(1) -indicates normal
2. abnormal(2) -indicates abnormal
3. outOfTime(3) -indicates timed-out
4.…
Enumeration
Enumerated Values:
1normal
2abnormal
3outOfTime
4notest
5dslBoardNoSupport
 .1.3.6.1.4.1.2011.6.21.2.1.1.2.1.13
hwIsdnUserInTestLtCurrentProctectResult
Describes the LT over current auto-protection capability .
Options:
1. outOfTime(1) -indicates timed-out
2. noProtect(2) -indicates not protected
3. protectNoRestore(3) -indicates pro…
Enumeration
Enumerated Values:
1outOfTime
2noProtect
3protectNoRestore
4protectAndRestore
5dslBoardNoSupport
 .1.3.6.1.4.1.2011.6.21.2.1.1.2.1.14
hwIsdnUserInTestCutLineVolVal
Describes the Manual switch-off line feeding voltage.
Unit: millivolt, ab. mV
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.2.1.15
hwIsdnUserInTestCutLineVolResult
Describes the Test result-Manual switch-off line feeding voltage.
Options:
1. normal(1) -indicates normal
2. abnormal(2) -indicates abnormal
3. outOfTime(3) -indicates timed-out …
Enumeration
Enumerated Values:
1normal
2abnormal
3outOfTime
4notest
5dslBoardNoSupport
 .1.3.6.1.4.1.2011.6.21.2.1.1.2.1.16
hwIsdnUserInTestSwitchOnVolVal
Describes the Switch on voltage.
Unit: millivolt, ab. mV
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.2.1.17
hwIsdnUserInTestSwitchOnVolResult
Describes the Test result-switch on voltage.
Options:
1. normal(1) -indicates normal
2. abnormal(2) -indicates abnormal
3. outOfTime(3) -indicates timed-out
4. notes…
Enumeration
Enumerated Values:
1normal
2abnormal
3outOfTime
4notest
5dslBoardNoSupport
 .1.3.6.1.4.1.2011.6.21.2.1.1.2.1.18

hwIsdnUserOutTestOprTable

table
.1.3.6.1.4.1.2011.6.21.2.1.1.3 · 1 row entry · 13 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIsdnUserOutTestOprTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTEST-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTEST-MIB::hwIsdnUserOutTestOprTable' 
Operation table for the ISDN subscriber loop-line test:
It realizes the function of the loop-line test for ISDN subscribers in the system. In the loop-line test, the Activate NT1, Deactivate NT1, and Transmission Bit Error Rate are tested.
The index of this table is ifIndex.
hwIsdnUserOutTestOprEntry row .1.3.6.1.4.1.2011.6.21.2.1.1.3.1
Operation table for the ISDN subscriber loop-line test:
It realizes the function of the loop-line test for ISDN subscribers in the system. In the loop-line test, the Activate NT1, Deactivate NT1, and Transmission Bit Er…
Indexes
Column Syntax OID
hwIsdnUserOutTestOprType
Describes the Operation type.
Options:
1. stop(1) -stop the test
2. start(2) -start the test
Enumerationr/w
Enumerated Values:
1stop
2start
 .1.3.6.1.4.1.2011.6.21.2.1.1.3.1.1
hwIsdnUserOutTestActiveNT1
Describes the ISDN loop line test-Activate NT1.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.3.1.2
hwIsdnUserOutTestDeactiveNT1
Describes the ISDN loop line test-Deactivate NT1.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.3.1.3
hwIsdnUserOutTestTransBitError
Describes the ISDN loop line test-Transmission Bit Error Rate.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.3.1.4
hwIsdnUserOutTestErrCodeTestTime
Describes the Bit Error Rate Test Duration.
Unit: s.
Default: 120 s for the EMS
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.2011.6.21.2.1.1.3.1.5
hwIsdnUserOutTestBusyProcessFlag
Describes the Busy control flag.
Options:
1. busyNoTest(1) -indicates no test when busy
2. busyTest(2) -indicates remedy test when busy
Enumerationr/w
Enumerated Values:
1busyNoTest
2busyTest
 .1.3.6.1.4.1.2011.6.21.2.1.1.3.1.6
hwIsdnUserOutTestStatus
Describes the Test status.
Options:
1. normal(1) -indicates normal
2. abnormal(2) -indicates abnormal
3. portbusy(3) -indicates busy port
4. outoftime(4) -indicates ti…
Enumeration
Enumerated Values:
1normal
2abnormal
3portbusy
4outoftime
5testingAbnormal
 .1.3.6.1.4.1.2011.6.21.2.1.1.3.1.7
hwIsdnUserOutTestActNT1Result
Describes the Activation NT1 result .
Options:
1. normal(1) -indicates Normal
2. activeFail(2) -indicates failure
3. noNt1OrNt1NotUse(3) -indicates no NT1 or NT1 is unavailable
4. activ…
Enumeration
Enumerated Values:
1normal
2activeFail
3noNt1OrNt1NotUse
4activeUifSuccess
5activeUifAndSifSuccess
6outOfTime
7startTestFail
 .1.3.6.1.4.1.2011.6.21.2.1.1.3.1.8
hwIsdnUserOutTestDeactNT1Result
Describes the Test result-Deactivate NT1.
Options:
1. normal(1) -indicates normal
2. abnormal(2) -indicates abnormal
3. outoftime(3) -indicates timed-out
4. notest(4) -indicates n…
Enumeration
Enumerated Values:
1normal
2abnormal
3outoftime
4notest
 .1.3.6.1.4.1.2011.6.21.2.1.1.3.1.9
hwIsdnUserOutTestTransBitErrorResult
Describes the Test result-Transmission bit error rate.
Options:
1. normal(1) -indicates normal
2. nt1BadOrNoTexist(2) -indicates NT1 is bad or no NT1
3. nt1ActiveFail(3) -indicates activating NT1 fail…
Enumeration
Enumerated Values:
1normal
2nt1BadOrNoTexist
3nt1ActiveFail
4nt1LoopFail
5syncFail
6outOfTime
7notest
 .1.3.6.1.4.1.2011.6.21.2.1.1.3.1.10
hwIsdnUserOutTestTotalSend
Describes the Total number of sent bits
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.3.1.11
hwIsdnUserOutTestCodeErrorNumber
Describes the Number of bit errors
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.3.1.12
hwIsdnUserOutTestCodeErrorRate
Describes the Bit error rate
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.3.1.13

hwIsdnUserOutLineTestOprTable

table
.1.3.6.1.4.1.2011.6.21.2.1.1.4 · 1 row entry · 35 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIsdnUserOutLineTestOprTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTEST-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTEST-MIB::hwIsdnUserOutLineTestOprTable' 
Operation table for the ISDN subscriber loop-line test.
It realizes the function of the loop-line test for ISDN subscribers in the system. In the loop-line test, the voltage, resistance and capacitance of the loop line are tested to check for faults such as broken circuit, short circuit, grounding and cross-connected line.
The index of this table is ifIndex
hwIsdnUserOutLineTestOprEntry row .1.3.6.1.4.1.2011.6.21.2.1.1.4.1
Operation table for the ISDN subscriber loop-line test.
It realizes the function of the loop-line test for ISDN subscribers in the system. In the loop-line test, the voltage, resistance and capacitance of the loop line …
Indexes
Column Syntax OID
hwIsdnUserOutLineTestOprType
Describes the Operation type.
Options:
1. stop(1) -stop the test
2. start(2) -start the test
Enumerationr/w
Enumerated Values:
1stop
2start
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.1
hwIsdnUserOutLineTestVoltage
ISDN loop line test-Voltage.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.2
hwIsdnUserOutLineTestResistance
ISDN loop line test-Resistance.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.3
hwIsdnUserOutLineTestCapacitance
ISDN loop line test-Capacitance.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.4
hwIsdnUserOutLineTestBusyProcFlag
Busy control flag .
Options:
1. busyNoTest(1) -indicates no test when busy
2. busyTest(2) -indicates remedy test when busy
Enumerationr/w
Enumerated Values:
1busyNoTest
2busyTest
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.5
hwIsdnUserOutLineTestStatus
Test status.
Options:
1. normal(1) -indicates normal
2. abnormal(2) -indicates abnormal
3. portbusy(3) -indicates busy port
4. outoftime(4) -indicates timed-out
5.…
Enumeration
Enumerated Values:
1normal
2abnormal
3portbusy
4outoftime
5testingAbnormal
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.6
hwIsdnUserOutLineTestConclusion
Conclusion
Range:1-89
(Enumerated type.
1: Normal 2: Contact with the power line 3: A line mixed with others 4: B line mixed with others
5: Mixed with others (two lines) 6: A line grounding 7: B line grounding 8: AB g…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.7
hwIsdnUserOutLineTestACAG
A->ground AC voltage.
Unit: millivolt, ab. mV
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.8
hwIsdnUserOutLineTestACBG
B->ground AC voltage.
Unit: millivolt, ab. mV
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.9
hwIsdnUserOutLineTestACAB
A->B AC voltage.
Unit: millivolt, ab. mV
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.10
hwIsdnUserOutLineTestDCAG
A->ground DC voltage.
Unit: millivolt, ab. mV
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.11
hwIsdnUserOutLineTestDCBG
B->ground DC voltage.
Unit: millivolt, ab. mV
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.12
hwIsdnUserOutLineTestDCAB
A->B DC voltage.
Unit: millivolt, ab. mV
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.13
hwIsdnUserOutLineTestRAG
A->ground insulation resistance.
Unit: ohm
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.14
hwIsdnUserOutLineTestRBG
B->ground insulation resistance.
Unit: ohm
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.15
hwIsdnUserOutLineTestRAB
A->B insulation resistance.
Unit: ohm
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.16
hwIsdnUserOutLineTestCapAG
A->ground capacitance.
Unit: nF
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.17
hwIsdnUserOutLineTestCapBG
B->ground capacitance.
Unit: nF
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.18
hwIsdnUserOutLineTestCapAB
A->B capacitance.
Unit: nF
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.19
hwIsdnUserOutLineTestImpedance
Loop-Line Test-Impedance.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.20
hwIsdnUserOutLineTestImpedanceAB
A->B impedance.
Unit: ohm
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.21
hwIsdnUserOutLineTestImpedanceBA
B->A impedance.
Unit: ohm
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.22
hwIsdnUserOutLineTestImpedanceAG
A->ground impedance.
Unit: ohm
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.23
hwIsdnUserOutLineTestImpedanceBG
B->ground impedance.
Unit: ohm
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.24
hwIsdnUserOutLineTestCurrent
Loop line test-Current.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.25
hwIsdnUserOutLineTestACCurrentAG
A->ground AC current
Unit: mA
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.26
hwIsdnUserOutLineTestACCurrentBG
B->ground AC current.
Unit: mA
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.27
hwIsdnUserOutLineTestACCurrentAB
AB AC current.
Unit: mA
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.28
hwIsdnUserOutLineTestDCCurrentAG
A->ground DC current.
Unit: mA
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.29
hwIsdnUserOutLineTestDCCurrentBG
B->ground DC current.
Unit: mA
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.30
hwIsdnUserOutLineTestDCCurrentAB
AB DC current.
Unit: mA
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.31
hwIsdnUserOutLineTestLoopCurrent
Loop-Line Test-Loop Current.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.32
hwIsdnUserOutLineTestLC
Loop Current.
Unit: mA
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.33
hwIsdnUserOutLineTestNoise
Loop-Line Test-Noise .
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.34
hwIsdnUserOutLineTestN
Noise.
Unit: dBm
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.4.1.35

hwIsdnPortStateSwitchTestOprTable

table
.1.3.6.1.4.1.2011.6.21.2.1.1.5 · 1 row entry · 2 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIsdnPortStateSwitchTestOprTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTEST-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTEST-MIB::hwIsdnPortStateSwitchTestOprTable' 
Operation table for the test on ISDN port status switching:
It realizes the function of the test on ISDN port status switching in the system. In the test, the status of a port is switched between NT1 and LT to check whether the NT1 and LT functions of the port work.
The index of this table is ifIndex
hwIsdnPortStateSwitchTestOprEntry row .1.3.6.1.4.1.2011.6.21.2.1.1.5.1
Operation table for the test on ISDN port status switching:
It realizes the function of the test on ISDN port status switching in the system. In the test, the status of a port is switched between NT1 and LT to check whe…
Indexes
Column Syntax OID
hwIsdnPortStateSwitchTestOprType
Operation type .
Options:
1. switchNT1(1) -indicates Switch to NT1
2. switchLT(2) -indicates Switch to LT
3. switchnormal(3) -indicates Switch to the normal state
Enumerationr/w
Enumerated Values:
1switchNT1
2switchLT
3switchnormal
 .1.3.6.1.4.1.2011.6.21.2.1.1.5.1.1
hwIsdnPortStateSwitchTestStatus
Test status.
Options:
1. success(1) -indicates normal
2. failure(2) -indicates abnormal
3. portBusy(3) -indicates busy port
4. timeOut(4) -indicates timed-out
5. testingAbnormal(5) -indic…
Enumeration
Enumerated Values:
1success
2failure
3portBusy
4timeOut
5testingAbnormal
 .1.3.6.1.4.1.2011.6.21.2.1.1.5.1.2

hw112UserRingTestOprTable

table
.1.3.6.1.4.1.2011.6.21.2.1.1.6 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hw112UserRingTestOprTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTEST-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTEST-MIB::hw112UserRingTestOprTable' 
Ringing test on the 112 analog subscriber phones:
It realizes the function of the ringing test on the phones of subscribers in the system. This test helps check whether a subscriber phone can ring normally.
The index of this table is ifIndex
hw112UserRingTestOprEntry row .1.3.6.1.4.1.2011.6.21.2.1.1.6.1
Ringing test on the 112 analog subscriber phones:
It realizes the function of the ringing test on the phones of subscribers in the system. This test helps check whether a subscriber phone can ring normally.
The index of…
Indexes
Column Syntax OID
hw112UserRingTestOprType
Operation type .
Options:
1. stop(1) -stop the test
2. start(2) -start the test
Note:The 112 protocol does not define the stop command.
Enumerationr/w
Enumerated Values:
1stop
2start
 .1.3.6.1.4.1.2011.6.21.2.1.1.6.1.1
hw112UserRingTestTime
Ringing duration.
Unit: second
Integer32r/w
Constraints:
range: 3-60
 .1.3.6.1.4.1.2011.6.21.2.1.1.6.1.2
hw112UserRingTestResult
Test result.
Options:
1. offhook(1) -indicates off hook
2. onhook(2) -indicates on hook
The 112 protocol defines only two test results.
Enumeration
Enumerated Values:
1offhook
2onhook
 .1.3.6.1.4.1.2011.6.21.2.1.1.6.1.3

hw112UserDialTestOprTable

table
.1.3.6.1.4.1.2011.6.21.2.1.1.7 · 1 row entry · 11 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hw112UserDialTestOprTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTEST-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTEST-MIB::hw112UserDialTestOprTable' 
Operation table for the test on the DTMF or pulse feature of the 112 analog subscriber phones:
It realizes the test on the DTMF or pulse feature of the subscriber phones in the system. This test helps check whether a subscriber phone can make calls normally.
The index of this table is ifIndex
hw112UserDialTestOprEntry row .1.3.6.1.4.1.2011.6.21.2.1.1.7.1
Operation table for the test on the DTMF or pulse feature of the 112 analog subscriber phones:
It realizes the test on the DTMF or pulse feature of the subscriber phones in the system. This test helps check whether a su…
Indexes
Column Syntax OID
hw112UserDialTestOprType
Operation type .
Options:
1. stop(1) -stop the test
2. start(2) -start the test
Note:The 112 protocol does not define the stop command.
Enumerationr/w
Enumerated Values:
1stop
2start
 .1.3.6.1.4.1.2011.6.21.2.1.1.7.1.1
hw112UserDialTestReceiveNumber
Number of received calls
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.7.1.2
hw112UserDialTestResult
Operation result.
Options:
1. success(1) -indicates the test is successful
2. fail(2) -indicates the test fail
Enumeration
Enumerated Values:
1success
2fail
 .1.3.6.1.4.1.2011.6.21.2.1.1.7.1.3
hw112UserDialTestDigit
Dialing numeral.
Options:
1. n1(1) -indicates 1
2. n2(2) -indicates 2
3. n3(3) -indicates 3
4. n4(4) -indicates 4
5. n5(5) -indicates 5
6. n6(6) -indicates 6
7. n7(7) -indicate…
Enumeration
Enumerated Values:
1n1
2n2
3n3
4n4
5n5
6n6
7n7
8n8
9n9
10n0
11nStar
12nWell
13nOthers
14onhook
 .1.3.6.1.4.1.2011.6.21.2.1.1.7.1.4
hw112UserDialTestLowLevel
Digital low power level.
Unit: dBm
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.7.1.5
hw112UserDialTestHighLevel
Digital high power level.
Unit: dBm
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.7.1.6
hw112UserDialTestLowFreq
Digital low frequency.
Unit: Hz
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.7.1.7
hw112UserDialTestHighFreq
Digital high frequency.
Unit: Hz
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.7.1.8
hw112UserDialTestPulseLen
Pulse length.
Unit: millisecond
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.7.1.9
hw112UserDialTestMakeDur
Pulse duration.
Unit: millisecond
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.7.1.10
hw112UserDialTestBreakDur
Pulse break length.
Unit: millisecond
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.7.1.11

hw112UserHowlerTestOprrTable

table
.1.3.6.1.4.1.2011.6.21.2.1.1.8 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hw112UserHowlerTestOprrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTEST-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTEST-MIB::hw112UserHowlerTestOprrTable' 
Operation table for the howler tone test on 112 analog subscriber phones:
It realizes the function of the howler tone test on the subscriber phones in the system. This test helps check whether a subscriber phone can play the howler tone normally.
The index of this table is ifIndex
hw112UserHowlerTestOprrEntry row .1.3.6.1.4.1.2011.6.21.2.1.1.8.1
Operation table for the howler tone test on 112 analog subscriber phones:
It realizes the function of the howler tone test on the subscriber phones in the system. This test helps check whether a subscriber phone can pla…
Indexes
Column Syntax OID
hw112UserHowlerTestOprType
Operation type .
Options:
1. stop(1) -stop the test
2. start(2) -start the test
Note:The 112 protocol does not define the stop command.
Enumerationr/w
Enumerated Values:
1stop
2start
 .1.3.6.1.4.1.2011.6.21.2.1.1.8.1.1
hw112UserHowlerTestTime
Howler tone length.
Unit: second
Integer32r/w
Constraints:
range: 3-180
 .1.3.6.1.4.1.2011.6.21.2.1.1.8.1.2
hw112UserHowlerTestResult
Operation result.
Options:
1. offhook(1) -indicates off hook
2. onhook(2) -indicates on hook
The 112 protocol defines only two test results.
Enumeration
Enumerated Values:
1offhook
2onhook
 .1.3.6.1.4.1.2011.6.21.2.1.1.8.1.3

hw112IsdnDiagnoseTestOprTable

table
.1.3.6.1.4.1.2011.6.21.2.1.1.9 · 1 row entry · 12 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hw112IsdnDiagnoseTestOprTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTEST-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTEST-MIB::hw112IsdnDiagnoseTestOprTable' 
Operation table for the diagnosis test on the 112 ISDN subscribers:
It realizes the function of the diagnosis test on the 112 ISDN subscribers in the system. Its test items are the same as the test items of the circuit test on the PSTN subscribers.
The index of this table is ifIndex
hw112IsdnDiagnoseTestOprEntry row .1.3.6.1.4.1.2011.6.21.2.1.1.9.1
Operation table for the diagnosis test on the 112 ISDN subscribers:
It realizes the function of the diagnosis test on the 112 ISDN subscribers in the system. Its test items are the same as the test items of the circuit …
Indexes
Column Syntax OID
hw112IsdnDiagnoseTestOprType
Operation type .
Options:
1. start(1) -start the test
2. stop(2) -stop the test
Note:The 112 protocol does not define the stop command.
Enumerationr/w
Enumerated Values:
1start
2stop
 .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.1
hw112IsdnDiagnoseTestLoopType
Loopback type.
Options:
1. nt1(1) -indicates NT1
2. ltet(2) -indicates LT/ET
Enumerationr/w
Enumerated Values:
1nt1
2ltet
 .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.2
hw112IsdnDiagnoseTestLoopChannel
Loopback .
Options:
1. bOne(1) -indicates B1
2. bTwo(2) -indicates B2
3. twoBAndD(3) -indicates 2B+D
4. pra(4) -indicates PRA
Enumerationr/w
Enumerated Values:
1bOne
2bTwo
3twoBAndD
4pra
 .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.3
hw112IsdnDiagnoseTestResult
Operation result.
Options:
1. success(1) -indicates loopback success, and user stop the test manually;
2. failure(2) -indicates loopback failure;
3. timeoutsuccess(3) -indicates loopback success, a…
Enumeration
Enumerated Values:
1success
2failure
3timeoutsuccess
4exceptionstop
5testcanceled
 .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.4
hw112IsdnDiagnoseTestLoopTime
Loop time.
Unit: minute
Integer32r/w
Constraints:
range: 1-1440
 .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.5
hw112IsdnDiagnoseTestLoopDirection
Loop direction.
Options:
1. nearloop(1) -indicates loop direction is near loop
2. farloop(2) -indicates loop direction is far loop
Enumerationr/w
Enumerated Values:
1nearloop
2farloop
 .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.6
hw112IsdnDiagnoseTestLoopTs
Time slot to be looped back
Integer32r/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.7
hw112IsdnDiagnoseTestDeferredTestFlag
deferred test flag:
Options:
1. immediatetest(1) -immediate test;
2. deferredtest(2) -indicates deferred test: Initiated when the port is in service. If the port is busy, the test operation
…
Enumerationr/w
Enumerated Values:
1immediatetest
2deferredtest
 .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.8
hw112IsdnDiagnoseTestDeferredTime
Deferred time(unit: minute):
this leaf node is valid only when the value of hw112IsdnDiagnoseTestDeferredTestFlag is deferredtest(2).
Default: 30(minute).
Integer32r/w
Constraints:
range: 1-1440
 .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.9
hw112IsdnDiagnoseTestTimeoutProc
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Timeout proc:
1-when deferred time out, if the port is still in service, test will be canceled;
2-when deferred time out, if the port…
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.10
hw112IsdnDiagnoseTestIfIndex
Port IfIndex
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.11
hw112IsdnDiagnoseTestRequestID
Request ID
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.9.1.12

hwPstnCallerEmulateOprTable

table
.1.3.6.1.4.1.2011.6.21.2.1.1.10 · 1 row entry · 11 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPstnCallerEmulateOprTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTEST-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTEST-MIB::hwPstnCallerEmulateOprTable' 
Operation table for the PSTN call emulation test (calling party):
It realizes the function of the call emulation test (caller dial) in the system. This test helps check whether a subscriber port can make calls normally as a calling party.
The index of this table is ifIndex.
hwPstnCallerEmulateOprEntry row .1.3.6.1.4.1.2011.6.21.2.1.1.10.1
Operation table for the PSTN call emulation test (calling party):
It realizes the function of the call emulation test (caller dial) in the system. This test helps check whether a subscriber port can make calls normally …
Indexes
Column Syntax OID
hwPstnCallerEmulateOprType
Operation type.
Options:
1: stop(1) -indicates Stop test
2: start(2) -indicates Start test
3: offHookConfirm(3) -indicates Off hook confirmation
4: sendDTMF(4) -indicates Send DTMF
Enumerationr/w
Enumerated Values:
1stop
2start
3offHookConfirm
4sendDTMF
 .1.3.6.1.4.1.2011.6.21.2.1.1.10.1.1
hwPstnCallerEmulateCalledTelNo
Called telephone number (max length: 32)
OctetStringr/w
Constraints:
range: 32-32
 .1.3.6.1.4.1.2011.6.21.2.1.1.10.1.2
hwPstnCallerEmulateDialMode
Dial type (Enumerated type.)
Options:
1. dtmf(1) -indicates the dial mode is DTMF
2. pulse(2) -indicates the dial mode is pulse
Enumerationr/w
Enumerated Values:
1dtmf
2pulse
 .1.3.6.1.4.1.2011.6.21.2.1.1.10.1.3
hwPstnCallerEmulateTestStatus
Test Status.
Options:
1. startSuccessfully(1) -indicates start successfully
2. stopSuccessfully(2) -indicates stop successfully
3. sendDTMFSuccessfully(3) -indicates send DTMF successfully
4. t…
Enumeration
Enumerated Values:
1startSuccessfully
2stopSuccessfully
3sendDTMFSuccessfully
4testOuttime
5noDialtone
6callerDialNumberAlready
7noRinging
8noRingbackTone
9waitingAgentMessageOuttime
10testingFailure
11agentMessageAck
12calledoffhook
13testingAbnormal
14broadbandtesting
15capturefail
16notratb
17configsuccessfully
18ring
19calleroffhook
20playdialtone
21receiving
22dialnumbercomplete
23ringingbacktone
24talking
28testfinished
 .1.3.6.1.4.1.2011.6.21.2.1.1.10.1.4
hwPstnCallerEmulateTestResult
Emulational Caller Test Result
Options:
1. callerNoDialTone(1) -indicates the caller does not have dial tone
2. callerOffHookingBusy(2) -indicates the caller is busy in off-hooking
3. callerDialingBusy(3)…
Enumeration
Enumerated Values:
1callerNoDialTone
2callerOffHookingBusy
3callerDialingBusy
4callerNoDial
5callerDialedBusy
6callerDialedNoTalk
7callRelease
8matchNoCompleted
9sendNoCompleted
10testSucceed
11callerMatchFailed
12callerPortAbnormal
 .1.3.6.1.4.1.2011.6.21.2.1.1.10.1.5
hwPstnCallerEmulateTestDTMFDetected
Detected Dtmf Num List
OctetString
Constraints:
range: 64-64
 .1.3.6.1.4.1.2011.6.21.2.1.1.10.1.6
hwPstnCallerEmulateTestHoldTime
Caller Emulate test hold time, the test will auto ended when this time out.
Unsigned32r/w
Constraints:
range: 5-600
 .1.3.6.1.4.1.2011.6.21.2.1.1.10.1.7
hwPstnCallerEmulateReportNumber
The actual called number string checked and send to MGC or IMS.
OctetString
Constraints:
range: 32-32
 .1.3.6.1.4.1.2011.6.21.2.1.1.10.1.8
hwPstnCallerEmulateLocalErrorCode
Error code send by Local side.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.21.2.1.1.10.1.9
hwPstnCallerEmulateRemoteErrorCode
Error code received from remote side.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.21.2.1.1.10.1.10
hwPstnCallerEmulateTestRequestID
Request ID
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.21.2.1.1.10.1.11

hwPstnCalledEmulateOprTable

table
.1.3.6.1.4.1.2011.6.21.2.1.1.11 · 1 row entry · 9 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPstnCalledEmulateOprTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTEST-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTEST-MIB::hwPstnCalledEmulateOprTable' 
The operation table of the caller test of the PSTN call emulation test. It is used to realize the caller 
test of the PSTN call emulation test, which is used to test whether a user of a port functioned as the 
caller can make a call.      
Operation table for the PSTN call emulation test (called party):
It realizes the function of the call emulation test (called party) in the system. This test helps check whether a subscriber port can make calls normally as a called party.
The index of this table is ifIndex
hwPstnCalledEmulateOprEntry row .1.3.6.1.4.1.2011.6.21.2.1.1.11.1
The operation table of the caller test of the PSTN call emulation test. It is used to realize the caller
test of the PSTN call emulation test, which is used to test whether a user of a port functioned as the
caller ca…
Indexes
Column Syntax OID
hwPstnCalledEmulateOprType
Operation type.
Options:
1. stop(1) -indicates Stop test
2. start(2) -indicates Start test
3. dialConfirm(3) -indicates Dial number confirmation
4. sendDTMF(4) -indicates Send DTMF
5. config(5) …
Enumerationr/w
Enumerated Values:
1stop
2start
3dialConfirm
4sendDTMF
5config
 .1.3.6.1.4.1.2011.6.21.2.1.1.11.1.1
hwPstnCalledEmulateTestStatus
Test Status.
Options:
1. startSuccessfully(1) -indicates start successfully
2. stopSuccessfully(2) -indicates stop successfully
3. sendDTMFSuccessfully(3) -indicates send DTMF successfully
4. testO…
Enumeration
Enumerated Values:
1startSuccessfully
2stopSuccessfully
3sendDTMFSuccessfully
4testOuttime
5noDialtone
6callerDialNumberAlready
7noRinging
8noRingbackTone
9waitingAgentMessageOuttime
10testingFailure
11agentMessageAck
12calledoffhook
13testingAbnormal
14broadbandtesting
15capturefail
16notratb
17configsuccessfully
18ring
19calleroffhook
20playdialtone
21dialnumbercomplete
23testfinished
 .1.3.6.1.4.1.2011.6.21.2.1.1.11.1.2
hwPstnCalledEmulateTestResult
Emulational Called Test Result
Options:
1. calledNoRing(1) -indicates the called user dose not ring
2. calledNoOffHook(2) -indicates the called user dose not off hook
3. calledOffHookingBusy(3) …
Enumeration
Enumerated Values:
1calledNoRing
2calledNoOffHook
3calledOffHookingBusy
4calledNoTalk
5callRelease
6matchNoCompleted
7sendNoCompleted
8testSucceed
9calledMatchFailed
10calledPortAbnormal
 .1.3.6.1.4.1.2011.6.21.2.1.1.11.1.3
hwPstnCalledEmulateTestDTMFDetected
Detected Dtmf Num List
OctetString
Constraints:
range: 64-64
 .1.3.6.1.4.1.2011.6.21.2.1.1.11.1.4
hwPstnCalledEmulateTestWaitTime
Called Emulate test waiting time, the test will auto failed when this time out and called port not received ring.
Unsigned32r/w
Constraints:
range: 5-600
 .1.3.6.1.4.1.2011.6.21.2.1.1.11.1.5
hwPstnCalledEmulateTestHoldTime
Called Emulate test hold time, the test will auto ended when this time out.
Unsigned32r/w
Constraints:
range: 5-600
 .1.3.6.1.4.1.2011.6.21.2.1.1.11.1.6
hwPstnCalledEmulateLocalErrorCode
Error code send by Local side.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.21.2.1.1.11.1.7
hwPstnCalledEmulateRemoteErrorCode
Error code received from remote side.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.21.2.1.1.11.1.8
hwPstnCalledEmulateTestRequestID
Request ID
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.21.2.1.1.11.1.9

hwPstnTelephoneTestOprTable

table
.1.3.6.1.4.1.2011.6.21.2.1.1.12 · 1 row entry · 11 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPstnTelephoneTestOprTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTEST-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTEST-MIB::hwPstnTelephoneTestOprTable' 
The operation table of the called test of the PSTN call emulation test. It is used to realize the called 
test of the PSTN call emulation test, which is used to test whether a user of a port functioned as the 
called party can make a call.
The index of this table is ifIndex.
Operation table for the PSTN telephone test:
It realizes the function of the test on subscriber phones in the system. This test helps test the features of the subscriber phone and check whether a subscriber phone works in the normal state.
hwPstnTelephoneTestOprEntry row .1.3.6.1.4.1.2011.6.21.2.1.1.12.1
The operation table of the called test of the PSTN call emulation test. It is used to realize the called
test of the PSTN call emulation test, which is used to test whether a user of a port functioned as the
called pa…
Indexes
Column Syntax OID
hwPstnTelephoneTestOprType
Operation type.
Options:
1. stop(1) -indicates Stop test
2. start(2) -indicates Start test
3. ringing(3) -indicates Ring
4. stopRinging(4) -indicates Stop ringing
5. …
Enumerationr/w
Enumerated Values:
1stop
2start
3ringing
4stopRinging
5recieveNumber
6stopRecievingNumber
7poleTest
8loopResistance
9busyTone
10stopBusyTone
11howlTone
12stopHowlTone
13flash
14stopFlash
 .1.3.6.1.4.1.2011.6.21.2.1.1.12.1.1
hwPstnTelephoneTestStatus
Test status.
Options:
1. startSuccessfully(1) -indicates Start test successfully
2. stopSuccessfully(2) -indicates Stop test successfully
3. testOuttime(3) -indicat…
Enumeration
Enumerated Values:
1startSuccessfully
2stopSuccessfully
3testOuttime
4asisportringing
5detectRingingOuttime
6waitingOffHookouttime
7waitingoffHook
8testingFailure
9onHook
10offHook
11ringingSuccessful
12stopRingingSuccessfully
13startToRecieveDigit
14stopRevievingDigitSuccessfully
15sendBusyToneSuccessfully
16stopBusyToneSuccessfully
17sendHowlToneSuccessfully
18stopHowlToneSuccessfully
19startToRecieveFlash
20stopRevFlashSuccessfully
21waitHTcmdTimeout
22reporttestreport
23testingAbnormal
29broadbandtesting
30capturefail
31notratb
32ringtimeout
 .1.3.6.1.4.1.2011.6.21.2.1.1.12.1.2
hwPstnTelephoneTestLoopResist
Loop resistance.
Unit: ohm
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.12.1.3
hwPstnTelephoneTestHookingTime
Hookflash time.
Unit: millisecond
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.12.1.4
hwPstnTelephoneTestReverse
Polarity reversal .
Options:
1: aPositiveAndbNegative(1) -indicates A+ B-
2: aNegativeAndbPositive(2) -indicates A- B+
3: noFeedVoltage(3) -indicates No feeding voltage
4: reverseTestOver(4) …
Enumeration
Enumerated Values:
1aPositiveAndbNegative
2aNegativeAndbPositive
3noFeedVoltage
4reverseTestOver
 .1.3.6.1.4.1.2011.6.21.2.1.1.12.1.5
hwPstnTelephoneTestDialDigit
Dialing numeral
Options:
1. n1(1) -indicates 1
2. n2(2) -indicates 2
3. n3(3) -indicates 3
4. n4(4) -indicates 4
5. n5(5) -indicates 5
6. n6(6) -indicates 6
7. n7(7) -indicate…
Enumeration
Enumerated Values:
1n1
2n2
3n3
4n4
5n5
6n6
7n7
8n8
9n9
10n0
11nStar
12nWell
13nOthers
 .1.3.6.1.4.1.2011.6.21.2.1.1.12.1.6
hwPstnTelephoneTestPulseLen
Pulse length.
Unit: millisecond
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.12.1.7
hwPstnTelephoneTestMakeDur
Pulse duration.
Unit: millisecond
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.12.1.8
hwPstnTelephoneTestBreakDur
Pulse break length.
Unit: millisecond
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.12.1.9
hwPstnTelephoneTestAssisTelno
Telephone number of the assistant port (the host sends the number to the EMS when the telephone test starts)
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.2011.6.21.2.1.1.12.1.10
hwPstnTelephoneTestRingTime
Ring time.
Unit: second
Integer32r/w
Constraints:
range: 0-360
 .1.3.6.1.4.1.2011.6.21.2.1.1.12.1.11

hwIsdnUserDiagnoseTestOprTable

table
.1.3.6.1.4.1.2011.6.21.2.1.1.13 · 1 row entry · 2 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIsdnUserDiagnoseTestOprTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTEST-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTEST-MIB::hwIsdnUserDiagnoseTestOprTable' 
Operation table for the diagnosis test on the ISDN subscribers:
It realizes the diagnosis test on the ISDN subscribers in the system. This test helps check the status and performance of the NT1 and transmission channel.
The index of this table is ifIndex
hwIsdnUserDiagnoseTestOprEntry row .1.3.6.1.4.1.2011.6.21.2.1.1.13.1
Operation table for the diagnosis test on the ISDN subscribers:
It realizes the diagnosis test on the ISDN subscribers in the system. This test helps check the status and performance of the NT1 and transmission channel.…
Indexes
Column Syntax OID
hwIsdnUserDiagnoseTestOprType
Operation type.
Options:
1: activate(1) -indicates Activate
2: deactivate(2) -indicates Deactivate
3: bbdLoopbackFromNT1(3) -indicates 2B+D loopback on NT1
4: b1LoopbackFromNT1(4) -indicates …
Enumerationr/w
Enumerated Values:
1activate
2deactivate
3bbdLoopbackFromNT1
4b1LoopbackFromNT1
5b2LoopbackFromNT1
6depravingCRCRequest
7depravingCRCAck
8holdingState
9restore
10nT1PowerState
11loopback1
12cancelLoopback1
13stopTest
14loopback4
15cancelloopback4
16sendCCRC
17stopSendCCRC
18testingAbnormal
 .1.3.6.1.4.1.2011.6.21.2.1.1.13.1.1
hwIsdnUserDiagnoseTestStatus
Test status.
Options:
1: startSuccessfully(1) -indicates Start test successfully (the EMS can activate or loop back a port without starting the test)
2: stopSuccessfully(2) …
Enumeration
Enumerated Values:
1startSuccessfully
2stopSuccessfully
3testingNormal
4actUIfouttime
5dslDeactOrCancelLoop
6actUIfFailed
7normalMasterPowerAbnormalStandbyPowerAbnormal
8normalMasterPowerNormalStandbyPowerAbnormal
9normalMasterPowerAbNormalStandbyPowerNormal
10normalMasterPowerNormalStandbyPowerNormal
11singleTestingOutTime
12singleTestingFailure
13outtime
14dslReportFailure
15notTesting
16testingAbnormal
 .1.3.6.1.4.1.2011.6.21.2.1.1.13.1.2

hwPstnSignalToneTestOprTable

table
.1.3.6.1.4.1.2011.6.21.2.1.1.14 · 1 row entry · 9 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPstnSignalToneTestOprTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTEST-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTEST-MIB::hwPstnSignalToneTestOprTable' 
Operation table for the PSTN signal tone test:
It realizes the function of the PSTN signal tone test in the system. This test helps check whether the dial tone and the dial tone delay function.
The index of this table is ifIndex
hwPstnSignalToneTestOprEntry row .1.3.6.1.4.1.2011.6.21.2.1.1.14.1
Operation table for the PSTN signal tone test:
It realizes the function of the PSTN signal tone test in the system. This test helps check whether the dial tone and the dial tone delay function.
The index of this entry i…
Indexes
Column Syntax OID
hwPstnSignalToneTestOprType
Operation type.
Options:
1. dialtone(1) -indicates Dial tone test
2. dailtoneDelay(2) -indicates Dial tone delay test
3. specialdailtone(3) -indicates Special Dial tone test
4. stopTest(4) -i…
Enumerationr/w
Enumerated Values:
-1invalidValue
1dialtone
2dailtoneDelay
3specialdailtone
4stopTest
5ringbacktone
6busytone
 .1.3.6.1.4.1.2011.6.21.2.1.1.14.1.1
hwPstnSignalToneTestBusyFlag
Signal tone test-Busy control.
Options:
1. busynotest(1) -indicates no test when busy
2. busystrentest(2) -indicates forced test when busy
3. invalidvalue(-1) -indicates Invalid value
Enumerationr/w
Enumerated Values:
-1invalidvalue
1busynotest
2busystrentest
 .1.3.6.1.4.1.2011.6.21.2.1.1.14.1.2
hwPstnSignalToneTestResult
Operation result.
Options:
1. signaltoneNormal(1) -indicates Signal tone normal
2. noSignaltone(2) -indicates No signal tone
3. signaltoneAbnormal(3) -indicates Signal tone abnormal
4. unknownError(4) …
Enumeration
Enumerated Values:
1signaltoneNormal
2noSignaltone
3signaltoneAbnormal
4unknownError
5testingAbnormal
6broadbandtesting
7capturefail
8notratb
9notone
10testnotfinish
 .1.3.6.1.4.1.2011.6.21.2.1.1.14.1.3
hwPstnSignalToneTestDTDelayTime
Dial tone delay.
Unit: millisecond
Integer32
Constraints:
range: -1-65535
 .1.3.6.1.4.1.2011.6.21.2.1.1.14.1.4
hwPstnSignalTonePlayTime
Tone play time.
Default: 10
Unit: second
Integer32r/w
Constraints:
range: -1--1
range: 5-30
 .1.3.6.1.4.1.2011.6.21.2.1.1.14.1.5
hwPstnSignalToneActualDeferTime
Signal Actually Defer Timer.
Unit: millisecond
Integer32
Constraints:
range: -1-65535
 .1.3.6.1.4.1.2011.6.21.2.1.1.14.1.6
hwPstnSignalToneTestMode
Test Mode.
Options:
1. outOfService(1) -Test port not need in service
2. inService(2) -Test port must be in servcie
3. invalidValue(-1) -Invalid value
Enumerationr/w
Enumerated Values:
-1invalidValue
1outOfService
2inService
 .1.3.6.1.4.1.2011.6.21.2.1.1.14.1.7
hwPstnSignalToneTestRequestID
Request ID
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.14.1.8
hwPstnSignalToneTestDTStop
Detect stop dial tone.
Options:
1.yes(1) -Detected stop dial tone
2.no(2) -Not detected stop dial tone
3.invalidValue(-1) -Invalid value
Enumeration
Enumerated Values:
-1invalidValue
1yes
2no
 .1.3.6.1.4.1.2011.6.21.2.1.1.14.1.9

hwIsdnMeterTestOprTable

table
.1.3.6.1.4.1.2011.6.21.2.1.1.15 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwIsdnMeterTestOprTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTEST-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTEST-MIB::hwIsdnMeterTestOprTable' 
Operation table for the ISDN meter test: 
It realizes the function of the ISDN meter test in the system. The test board provides, through the meter test function, the interface connected to the external test meter such as the multimeter.
The index of this table is ifIndex
hwIsdnMeterTestOprEntry row .1.3.6.1.4.1.2011.6.21.2.1.1.15.1
Operation table for the ISDN meter test:
It realizes the function of the ISDN meter test in the system. The test board provides, through the meter test function, the interface connected to the external test meter such …
Indexes
Column Syntax OID
hwIsdnMeterTestOprType
Describes the Operation type.
Options:
1. stop(1) -stop the test
2. start(2) -start the test
Enumerationr/w
Enumerated Values:
1stop
2start
 .1.3.6.1.4.1.2011.6.21.2.1.1.15.1.1
hwIsdnMeterTestItem
Test item.
Options:
1. inline(1) -indicates Circuit test
2. outline(2) -indicates Loop-line test
Enumerationr/w
Enumerated Values:
1inline
2outline
 .1.3.6.1.4.1.2011.6.21.2.1.1.15.1.2
hwIsdnMeterTestStatus
Test status.
Options:
1. success(1) -indicates normal
2. fail(2) -indicates abnormal
3. portbusy(3) -indicates busy port
4. outoftime(4) -indicates timed-out
5. testingAbnormal(5) …
Enumeration
Enumerated Values:
1success
2fail
3portbusy
4outoftime
5testingAbnormal
 .1.3.6.1.4.1.2011.6.21.2.1.1.15.1.3

hwTestBusTestOprTable

table
.1.3.6.1.4.1.2011.6.21.2.1.1.16 · 1 row entry · 6 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwTestBusTestOprTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTEST-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTEST-MIB::hwTestBusTestOprTable' 
Test on the circuit/loop-line test bus:
It realizes the function of the test on the circuit/loop-line test bus. This test helps check whether the circuit/loop-line test bus is normal.
The index of this table is hwTestGroupNo
hwTestBusTestOprEntry row .1.3.6.1.4.1.2011.6.21.2.1.1.16.1
Test on the circuit/loop-line test bus:
It realizes the function of the test on the circuit/loop-line test bus. This test helps check whether the circuit/loop-line test bus is normal.
The index of this entry is hwTestGr…
Indexes
Column Syntax OID
hwTestBusTestOprType
Describes the Operation type.
Options:
1. stop(1) -stop the test
2. start(2) -start the test
Enumerationr/w
Enumerated Values:
1stop
2start
 .1.3.6.1.4.1.2011.6.21.2.1.1.16.1.1
hwTestBusTestBusType
Operation type.
Options:
1. inbus(1) -indicates Circuit test bus
2. outbus(2) -indicates Loop-line test bus
Enumerationr/w
Enumerated Values:
1inbus
2outbus
 .1.3.6.1.4.1.2011.6.21.2.1.1.16.1.2
hwTestBusTestResult
Operation result.
Options:
1. testbusNormal(1) -indicates Normal
2. voltageAbnormal(2) -indicates Voltage abnormal
3. resistanceAbnormal(3) -indicates Resistance abnormal
4. capacitanceAbnormal(4) -indic…
Enumeration
Enumerated Values:
1testbusNormal
2voltageAbnormal
3resistanceAbnormal
4capacitanceAbnormal
5testOutoftime
6unknownError
7testingAbnormal
8broadbandtesting
9capturefail
10notratb
 .1.3.6.1.4.1.2011.6.21.2.1.1.16.1.3
hwTestBusTestVoltage
Voltage.
Unit: millivolt, ab. mV
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.16.1.4
hwTestBusTestResistance
Resistance.
Unit: ohm
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.16.1.5
hwTestBusTestCapacitance
Capacitance.
Unit: nF
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.16.1.6

hwFrameLooplineAdjustOprTable

table
.1.3.6.1.4.1.2011.6.21.2.1.1.17 · 1 row entry · 13 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwFrameLooplineAdjustOprTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTEST-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTEST-MIB::hwFrameLooplineAdjustOprTable' 
The loop line test for get check value.
The index of this table is hwFrameIndex
hwFrameLooplineAdjustOprEntry row .1.3.6.1.4.1.2011.6.21.2.1.1.17.1
The loop line test for get check value.
The index of this entry is hwFrameIndex
Indexes
Column Syntax OID
hwFrameLooplineAdjustCutlineSlotID
Slot ID.
Range:0-63
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.21.2.1.1.17.1.1
hwFrameLooplineAdjustCutlinePortID
Port ID.
Range:0-63
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.21.2.1.1.17.1.2
hwFrameLooplineAdjustSelfMixedSlotID
Slot ID.
Range:0-63
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.21.2.1.1.17.1.3
hwFrameLooplineAdjustSelfMixedPortID
Port ID.
Range:0-63
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.6.21.2.1.1.17.1.4
hwFrameLooplineAdjustOprType
Operation type.
Options:
1. test(1) -indicates test
2. modify(2) -indicates modify the test
3. restore(3) -indicates return to normal
Enumerationr/w
Enumerated Values:
1test
2modify
3restore
 .1.3.6.1.4.1.2011.6.21.2.1.1.17.1.5
hwFrameLooplineAdjustResult
Operation result.
Options:
1: normal(1) -indicates Normal
2: outoftime(2) -indicates Timed-out
3: unknownError(3) -indicates Unknown error
4: notgetselfmixedvalue(4) -indicates Failed…
Enumeration
Enumerated Values:
1normal
2outoftime
3unknownError
4notgetselfmixedvalue
5notgetcutlinevalue
6notgetallvalue
 .1.3.6.1.4.1.2011.6.21.2.1.1.17.1.6
hwFrameLooplineAdjustOprCab
A-B capacitance.
Unit: nF
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.17.1.7
hwFrameLooplineAdjustOprCag
A-Ground capacitance.
Unit: nF
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.17.1.8
hwFrameLooplineAdjustOprCbg
B-Ground capacitance.
Unit: nF
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.17.1.9
hwFrameLooplineAdjustOprRab
A-B resistance..
Unit: ohm
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.17.1.10
hwFrameLooplineAdjustFrameIndex
Frame index
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.17.1.11
hwFrameLooplineAdjustRequestID
Request ID
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.17.1.12
hwFrameLooplineAdjustBusyFlag
Whether test or not when port is busy.
Options:
1: cancel(1) -indicates notest
2: force(2) -indicates test
3: invalid(-1) -indicates invalid
Enumerationr/w
Enumerated Values:
-1invalid
1cancel
2force
 .1.3.6.1.4.1.2011.6.21.2.1.1.17.1.13

hwFrameLooplineAdjustTable

table
.1.3.6.1.4.1.2011.6.21.2.1.1.18 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwFrameLooplineAdjustTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTEST-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTEST-MIB::hwFrameLooplineAdjustTable' 
GET table for the shelf calibration values:
It realizes the function of obtaining the shelf calibration values.
The index of this table is hwFrameIndex.
hwFrameLooplineAdjustEntry row .1.3.6.1.4.1.2011.6.21.2.1.1.18.1
GET table for the shelf calibration values:
It realizes the function of obtaining the shelf calibration values.
The index of this entry is hwFrameIndex.
Indexes
Column Syntax OID
hwFrameLooplineAdjustFlag
Calibration value flag of the loop-line test.
Options:
1: nosetflag(1) -indicates No calibration value is set
2: capacitanceflag(2) -indicates The capacitance calibration value is set
3: resistanceflag(3) -in…
Enumeration
Enumerated Values:
1nosetflag
2capacitanceflag
3resistanceflag
4allsetflag
 .1.3.6.1.4.1.2011.6.21.2.1.1.18.1.1
hwFrameLooplineAdjustCab
A-B capacitance
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.18.1.2
hwFrameLooplineAdjustCag
A-Ground capacitance
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.18.1.3
hwFrameLooplineAdjustCbg
B-Ground capacitance
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.18.1.4
hwFrameLooplineAdjustRab
A-B resistance
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.18.1.5

hwQosTestOprTable

table
.1.3.6.1.4.1.2011.6.21.2.1.1.20 · 1 row entry · 23 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwQosTestOprTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTEST-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTEST-MIB::hwQosTestOprTable' 
Table for the QoS test.
The index of this table is hwQosTestIndex.
hwQosTestOprEntry row .1.3.6.1.4.1.2011.6.21.2.1.1.20.1
Table for the QoS test.
The index of this entry is hwQosTestIndex.
Indexes
Column Syntax OID
hwQosTestIndex
Index of the a test
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.20.1.1
hwQosTestGWAddr
IP address of the local gateway
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.21.2.1.1.20.1.2
hwQosTestPeerAddr
IP address of the peer gateway (or NAT, SAN)
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.21.2.1.1.20.1.3
hwQosTestDuration
Test duration. By default, the test duration is one hour.
Default:3600
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.20.1.4
hwQosTestTick
Report cycle. By default, the report cycle is 60s.
Default:60
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.20.1.5
hwQosTestRowStatus
Row status
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.6.21.2.1.1.20.1.6
hwQosTestInPkts
Test In Pkts
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.20.1.7
hwQosTestOutPkts
Test Out Pkts
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.20.1.8
hwQosTestInOctets
Test In Octets
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.20.1.9
hwQosTestOutOctets
Test Out Octets
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.20.1.10
hwQosTestInDropPkts
Test In Drop Pkts
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.20.1.11
hwQosTestStatsMaxDropPktsRate
Test Stats Max Drop Pkts Rate
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.20.1.12
hwQosTestStatsMaxDropPktsPort
Test Stats Max Drop Pkts Port
OctetString .1.3.6.1.4.1.2011.6.21.2.1.1.20.1.13
hwQosTestStatsMinDropPktsRate
Test Stats Min Drop Pkts Rate
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.20.1.14
hwQosTestStatsMinDropPktsPort
Test Stats Min Drop Pkts Port
OctetString .1.3.6.1.4.1.2011.6.21.2.1.1.20.1.15
hwQosTestStatsMaxDitherDelay
Test Stats Max Dither Delay
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.20.1.16
hwQosTestStatsMaxDitherPort
Test Stats Max Dither Port
OctetString .1.3.6.1.4.1.2011.6.21.2.1.1.20.1.17
hwQosTestStatsMinDitherDelay
Test Stats Min Dither Delay
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.20.1.18
hwQosTestStatsMinDitherPort
Test Stats Min Dither Port
OctetString .1.3.6.1.4.1.2011.6.21.2.1.1.20.1.19
hwQosTestStatsMaxLoopDelay
Test Stats Max Loop Delay
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.20.1.20
hwQosTestStatsMaxLoopPort
Test Stats Max Loop Port
OctetString .1.3.6.1.4.1.2011.6.21.2.1.1.20.1.21
hwQosTestStatsMinLoopDelay
Test Stats Min Loop Delay
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.20.1.22
hwQosTestStatsMinLoopPort
Test Stats Min Loop Port
OctetString .1.3.6.1.4.1.2011.6.21.2.1.1.20.1.23

hwSDLMeterTestOprTable

table
.1.3.6.1.4.1.2011.6.21.2.1.1.24 · 1 row entry · 2 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwSDLMeterTestOprTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTEST-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTEST-MIB::hwSDLMeterTestOprTable' 
Operation table for the SDL meter test: 
It realizes the function of the SDL meter test in the system. The test board provides, through the meter test function, the interface connected to the external test meter such as the multimeter.
The index of this table is ifIndex.
hwSDLMeterTestOprEntry row .1.3.6.1.4.1.2011.6.21.2.1.1.24.1
Operation table for the SDL meter test:
It realizes the function of the SDL meter test in the system. The test board provides, through the meter test function, the interface connected to the external test meter such as…
Indexes
Column Syntax OID
hwSDLMeterTestOprType
Operation type.
Options:
1. stop(1) -stop the test
2. start(2) -start the test
Enumerationr/w
Enumerated Values:
1stop
2start
 .1.3.6.1.4.1.2011.6.21.2.1.1.24.1.1
hwSDLMeterTestStatus
Test status.
Options:
1. success(1) -indicates normal
2. fail(2) -indicates abnormal
3. portbusy(3) -indicates busy port
4. outoftime(4) -indicates timed-out
5. testingAbnormal(5) -i…
Enumeration
Enumerated Values:
1success
2fail
3portbusy
4outoftime
5testingAbnormal
 .1.3.6.1.4.1.2011.6.21.2.1.1.24.1.2

hwSDLDMMTestOprTable

table
.1.3.6.1.4.1.2011.6.21.2.1.1.25 · 1 row entry · 18 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwSDLDMMTestOprTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTEST-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTEST-MIB::hwSDLDMMTestOprTable' 
Operation table for the SDL DMM test: 
It realizes the function of the SDL DMM test in the system. 
In the test, the voltage, resistance, and capacitance of the 
loop line are tested to check for faults such as broken circuit,
short circuit, grounding and cross-connected line.
The index of this table is ifIndex
hwSDLDMMTestOprEntry row .1.3.6.1.4.1.2011.6.21.2.1.1.25.1
Operation table for the SDL DMM test:
It realizes the function of the SDL DMM test in the system.
In the test, the voltage, resistance, and capacitance of the
loop line are tested to check for faults such as broken c…
Indexes
Column Syntax OID
hwSDLDMMTestOprType
Describes the Operation type.
Options:
1. stop(1) -stop the test
2. start(2) -start the test
Enumerationr/w
Enumerated Values:
1stop
2start
 .1.3.6.1.4.1.2011.6.21.2.1.1.25.1.1
hwSDLDMMTestVoltage
SDL DMM test-Voltage .
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.25.1.2
hwSDLDMMTestResistance
SDL DMM test-Resistance.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.25.1.3
hwSDLDMMTestCapacitance
SDL DMM test-Capacitance.
Options:
1. notest(1) -no test is applied
2. test(2) -a test is applied
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.25.1.4
hwSDLDMMTestStatus
Test status.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. portbusy(3) -indicates Busy port
4. outoftime(4) -indicates Timed-out
5. testingAbnormal(5…
Enumeration
Enumerated Values:
1normal
2abnormal
3portbusy
4outoftime
5testingAbnormal
 .1.3.6.1.4.1.2011.6.21.2.1.1.25.1.5
hwSDLDMMTestConclusion
Conclusion.
Options:
1. normal(1) -indicates Normal
2. powerline(2) -indicates Contact of power lines
3. amix(3) -indicates A line mixed with others
4. bmix(4) …
Enumeration
Enumerated Values:
1normal
2powerline
3amix
4bmix
5abmix
6agrnd
7bgrnd
8abgrnd
9selfmix
10abpoorinsulation
11agleak
12bgleak
13abgleak
14abgleak
15nomodem
16unknown
50abgrndorshortlinenoonu
51onunotexist
52normalwithonu
53abmixnoonu
54singlegndnoonu
55singlegndwithonu
56singlecutoff
 .1.3.6.1.4.1.2011.6.21.2.1.1.25.1.6
hwSDLDMMTestACAG
A->ground AC voltage.
Unit: millivolt, ab. mV
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.25.1.7
hwSDLDMMTestACBG
B->ground AC voltage.
Unit: millivolt, ab. mV
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.25.1.8
hwSDLDMMTestACAB
A->B AC voltage.
Unit: millivolt, ab. mV
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.25.1.9
hwSDLDMMTestDCAG
A->ground DC voltage.
Unit: millivolt, ab. mV
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.25.1.10
hwSDLDMMTestDCBG
B->ground DC voltage.
Unit: millivolt, ab. mV
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.25.1.11
hwSDLDMMTestDCAB
A->B DC voltage.
Unit: millivolt, ab. mV
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.25.1.12
hwSDLDMMTestRAG
A->ground insulation resistance.
Unit: ohm
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.25.1.13
hwSDLDMMTestRBG
B->ground insulation resistance.
Unit: ohm
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.25.1.14
hwSDLDMMTestRAB
A->B insulation resistance.
Unit: ohm
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.25.1.15
hwSDLDMMTestCapAG
A->ground capacitance.
Unit: nF
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.25.1.16
hwSDLDMMTestCapBG
B->ground capacitance.
Unit: nF
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.25.1.17
hwSDLDMMTestCapAB
A->B capacitance.
Unit: nF
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.25.1.18

hwLoopLineToneOprTable

table
.1.3.6.1.4.1.2011.6.21.2.1.1.26 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwLoopLineToneOprTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTEST-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTEST-MIB::hwLoopLineToneOprTable' 
Operation table for the loop-line tone test:
It realizes the function of the test on the circuit and loop-line signals.
The index of this table is ifIndex.
hwLoopLineToneOprEntry row .1.3.6.1.4.1.2011.6.21.2.1.1.26.1
Operation table for the loop-line tone test:
It realizes the function of the test on the circuit and loop-line signals.
The index of this entry is ifIndex.
Indexes
Column Syntax OID
hwLoopLineToneOprType
Operation type.
Options:
1. check(1) -indicates Detect the signal tone
2. send(2) -indicates Send the signal tone
3. stopsend(3) -indicates Stop sending the signal tone)
Enumerationr/w
Enumerated Values:
1check
2send
3stopsend
 .1.3.6.1.4.1.2011.6.21.2.1.1.26.1.1
hwLoopLineToneIntensity
Signal tone intensity.
Options:
1. fivedB(1) -indicates 5 dB
2. tendB(2) -indicates 10 dB
3. fifteendB(3) -indicates 15 dB
Enumerationr/w
Enumerated Values:
1fivedB
2tendB
3fifteendB
 .1.3.6.1.4.1.2011.6.21.2.1.1.26.1.2
hwLoopLineToneBusyFlag
Busy control flag.
Options:
1. busynotest(1) -indicates no test when busy
2. busystrentest(2) -indicates Forced test when busy
Enumerationr/w
Enumerated Values:
1busynotest
2busystrentest
 .1.3.6.1.4.1.2011.6.21.2.1.1.26.1.3
hwLoopLineToneResult
Operation result.
Options:
1. succeed(1) -indicates successful
2. failed(2) -indicates failed
Enumeration
Enumerated Values:
1succeed
2failed
 .1.3.6.1.4.1.2011.6.21.2.1.1.26.1.4

hwPotsSelfCircuitTestOprTable

table
.1.3.6.1.4.1.2011.6.21.2.1.1.27 · 1 row entry · 33 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPotsSelfCircuitTestOprTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTEST-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTEST-MIB::hwPotsSelfCircuitTestOprTable' 
Operation table for the PSTN subscriber circuit test.
The index of this table is ifIndex.
hwPotsSelfCircuitTestOprEntry row .1.3.6.1.4.1.2011.6.21.2.1.1.27.1
Operation table for the PSTN subscriber circuit test.
The index of this entry is ifIndex.
Indexes
Column Syntax OID
hwPotsSelfCircuitTestOprType
Circuit test-Operation type.
Options:
1. stop(1) -stop the test
2. start(2) -start the test
Enumerationr/w
Enumerated Values:
1stop
2start
 .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.1
hwPotsSelfCircuitTestBusyProcFlag
Circuit test-Busy control.
Options:
1. busynotest(1) -indicates no test when busy
2. busytest(2) -indicates remedy test when busy
3. busystrentest(3) -indicates force to test when busy
4. deferredtest(4)…
Enumerationr/w
Enumerated Values:
1busynotest
2busytest
3busystrentest
4deferredtest
 .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.2
hwPotsSelfCircuitTestStatus
Circuit test-Test status.
Options:
1. normal(1) -indicates Normal
2. testfail(2) -indicates Abnormal
3. portbusy(3) -indicates Busy port
4. outoftime(4) -indicates Timed-out
5. testingAbnor…
Enumeration
Enumerated Values:
1normal
2testfail
3portbusy
4outoftime
5testingAbnormal
6testcanceled
 .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.3
hwPotsSelfCircuitTestVDDResult
Circuit test result-VDD result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -indicates the test result is notsupport
Enumeration
Enumerated Values:
1normal
2abnormal
3notsupport
 .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.4
hwPotsSelfCircuitTestVBATLResult
Circuit test result-VBATL result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -indicates the test result is notsupport
Enumeration
Enumerated Values:
1normal
2abnormal
3notsupport
 .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.5
hwPotsSelfCircuitTestVBATHResult
Circuit test result-VBATH result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -indicates the test result is notsupport
Enumeration
Enumerated Values:
1normal
2abnormal
3notsupport
 .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.6
hwPotsSelfCircuitTestVBATRResult
Circuit test result-VBATR result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -indicates the test result is notsupport
Enumeration
Enumerated Values:
1normal
2abnormal
3notsupport
 .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.7
hwPotsSelfCircuitTestLoopCurrentResult
Circuit test result-Loop current result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -indicates the test result is notsup…
Enumeration
Enumerated Values:
1normal
2abnormal
3notsupport
 .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.8
hwPotsSelfCircuitTestFeedVResult
Circuit test result-Feeder voltage result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -indicates the test result is notsu…
Enumeration
Enumerated Values:
1normal
2abnormal
3notsupport
 .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.9
hwPotsSelfCircuitTestRingVResult
Circuit test result-Ring voltage result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -indicates the test result is notsuppo…
Enumeration
Enumerated Values:
1normal
2abnormal
3notsupport
 .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.10
hwPotsSelfCircuitTestRingFResult
Circuit test result-Ring frequency result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -indicates the test result is notsup…
Enumeration
Enumerated Values:
1normal
2abnormal
3notsupport
 .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.11
hwPotsSelfCircuitTestVAGResult
Circuit test result-A->ground voltage result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -indicates the test result is not…
Enumeration
Enumerated Values:
1normal
2abnormal
3notsupport
 .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.12
hwPotsSelfCircuitTestVBGResult
Circuit test result-B->ground voltage result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -indicates the test result is no…
Enumeration
Enumerated Values:
1normal
2abnormal
3notsupport
 .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.13
hwPotsSelfCircuitTestDeferredTime
deferred time
Unit: minute
this leaf node is valid only when the value of hwPotsSelfCircuitTestBusyProcFlag is deferredtest(4).
Default: 30(minute).
Integer32r/w
Constraints:
range: -1--1
range: 1-1440
 .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.14
hwPotsSelfCircuitTestTimeoutProc
timeout proc:
Options:
1. notest(1) -indicates when deferred time out, if the port is still busy, test will be canceled
2. test(2) -indicates when deferred time out, if the port is still busy, test will be preform…
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.15
hwPotsSelfCircuitTestFeedVValue
Circuit Test Result-Feeder voltage
Unit: millivolt, mV
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.16
hwPotsSelfCircuitTestRingVValue
Circuit Test Result-Ringing current voltage
Unit: millivolt, mV
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.17
hwPotsSelfCircuitTestLoopCurrentValue
Circuit Test Result-Loop current
Unit: millivolt, mV
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.18
hwPotsSelfCircuitTestLoopIfIndex
Port Index
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.19
hwPotsSelfCircuitTestLoopRequestID
Request ID
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.20
hwPotsSelfCircuitTestOnHookDetectResult
Circuit test OnHookDetect result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -indicates the test result is notsupport
Enumeration
Enumerated Values:
1normal
2abnormal
3notsupport
 .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.21
hwPotsSelfCircuitTestOffHookDetectResult
Circuit test OffHookDetect result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -indicates the test result is notsupport
Enumeration
Enumerated Values:
1normal
2abnormal
3notsupport
 .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.22
hwPotsSelfCircuitTestStopRingResult
Circuit test StopRing result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -indicates the test result is notsupport
Enumeration
Enumerated Values:
1normal
2abnormal
3notsupport
 .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.23
hwPotsSelfCircuitTestVPoleResult
Circuit test VPole result.
Options:
1. normal(1) -indicates the test result is normal
2. abnormal(2) -indicates the test result is abnormal
3. notsupport(3) -indicates the test result is notsupport
Enumeration
Enumerated Values:
1normal
2abnormal
3notsupport
 .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.24
hwPotsSelfCircuitTestVBATLValue
Circuit Test VBATL Value
Unit: mV
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.25
hwPotsSelfCircuitTestVBATHValue
Circuit Test VBATH Value
Unit: mV
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.26
hwPotsSelfCircuitTestVBATRValue
Circuit Test VBATR Value
Unit: mV
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.27
hwPotsSelfCircuitTestRingFValue
Circuit Test Ring Frequency Value
Unit: HZ
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.28
hwPotsSelfCircuitTestVAGValue
Circuit Test A->Ground Value
Unit: mV
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.29
hwPotsSelfCircuitTestVBGValue
Circuit Test B->Ground Value
Unit: mV
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.30
hwPotsSelfCircuitTestVABPoleValue
Circuit Test A->B Pole Voltage Value
Unit: mV
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.31
hwPotsSelfCircuitTestABLCurrentValue
Circuit Test A->B Current Value
Unit: uA
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.32
hwPotsSelfCircuitTestSLICTempValue
Circuit SLIC Temp Value
Unit: oC
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.27.1.33

hwPstnCallTestResultTable

table
.1.3.6.1.4.1.2011.6.21.2.1.1.29 · 1 row entry · 9 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPstnCallTestResultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTEST-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTEST-MIB::hwPstnCallTestResultTable' 
Table for the result of the query test
The index of this table is hwPstnCallTestResultIndex
hwPstnCallTestResultEntry row .1.3.6.1.4.1.2011.6.21.2.1.1.29.1
Table for the result of the query test
The index of this entry is hwPstnCallTestResultIndex
Indexes
Column Syntax OID
hwPstnCallTestResultIndex
Index.
Range: 0-8000
Integer32
Constraints:
range: 0-8000
 .1.3.6.1.4.1.2011.6.21.2.1.1.29.1.1
hwPstnCallTestResultSerialNo
Serial number of the test
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.29.1.2
hwPstnCallTestResultFrameid
ID of the shelf where the tested port is located
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.29.1.3
hwPstnCallTestResultSlotid
ID of the slot where the tested port is located
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.29.1.4
hwPstnCallTestResultPortid
ID of the tested port
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.29.1.5
hwPstnCallTestResult
Test result:
1. Normal
2. No dial tone
3. The called telephone does not ring
4. The voice circuit cannot get through
5. TSS is abnormal
6. The tested port is not correctly configured
7. The port is faulty
8. Ski…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.29.1.6
hwPstnCallTestResultIfId
Interface ID
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.29.1.7
hwPstnCallTestResultCallerId
Caller ID
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.29.1.8
hwPstnCallTestResultTelNo
Telephone number of the tested port
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.2011.6.21.2.1.1.29.1.9

hw112UserInDialTestOprTable

table
.1.3.6.1.4.1.2011.6.21.2.1.1.30 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hw112UserInDialTestOprTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTEST-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTEST-MIB::hw112UserInDialTestOprTable' 
This table is used to check whether a subscriber telephone can work in the normal state. The method is that the operator emulates a tested port to make calls.
The index of this table is ifIndex.
hw112UserInDialTestOprEntry row .1.3.6.1.4.1.2011.6.21.2.1.1.30.1
This table is used to check whether a subscriber telephone can work in the normal state. The method is that the operator emulates a tested port to make calls.
The index of this entry is ifIndex.
Indexes
Column Syntax OID
hw112UserInDialTestOprType
Operation type.
Options:
1. stop(1) -stop the test
2. start(2) -start the test
The 112 protocol does not define the stop command.
Enumerationr/w
Enumerated Values:
1stop
2start
 .1.3.6.1.4.1.2011.6.21.2.1.1.30.1.1
hw112UserInDialTestTime
Test duration
Unit: second
Integer32r/w
Constraints:
range: 1-5
 .1.3.6.1.4.1.2011.6.21.2.1.1.30.1.2
hw112UserInDialTestResult
Operation result.
Options:
1. over(1) -indicates Success
Enumeration
Enumerated Values:
1over
 .1.3.6.1.4.1.2011.6.21.2.1.1.30.1.3

hwISDNDiagnoseTestTable

table
.1.3.6.1.4.1.2011.6.21.2.1.1.31 · 1 row entry · 11 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwISDNDiagnoseTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTEST-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTEST-MIB::hwISDNDiagnoseTestTable' 
User fault test table.
The index of this table is ifIndex.
hwISDNDiagnoseTestEntry row .1.3.6.1.4.1.2011.6.21.2.1.1.31.1
User fault test table.
The index of this entry is ifIndex.
Indexes
Column Syntax OID
hwISDNDiagnoseTestPortIndex
Port index
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.31.1.1
hwISDNDiagnoseTestOprType
Test operation .
Options:
1. start(1) -indicates start the test
2. stop(2) -indicates stop the test
Enumerationr/w
Enumerated Values:
1start
2stop
 .1.3.6.1.4.1.2011.6.21.2.1.1.31.1.2
hwISDNDiagnoseTestType
Test type.
Options:
1. routinetest(1) -indicates routine test needs the port must be IS state, it only supports immediate test mode;
2. diagnosestest(2) -indicates diagnoses test needs the port must be OOS state, and…
Enumerationr/w
Enumerated Values:
1routinetest
2diagnosestest
 .1.3.6.1.4.1.2011.6.21.2.1.1.31.1.3
hwISDNDiagnoseTestItemType
Test item.
Options:
1. lineActiveTest(1) -indicates line active test
2. lineActiveAndCRCSendTest(2) -indicates line active test and CRC send test
Enumerationr/w
Enumerated Values:
1lineActiveTest
2lineActiveAndCRCSendTest
 .1.3.6.1.4.1.2011.6.21.2.1.1.31.1.4
hwISDNDiagnoseTestResult
Test Result.
Options:
1. activeok(1) -indicates line active ok
2. selfcheckfault(2) -indicates board selfcheck fault
3. loopback1operfault(3) -indicates loopback1 operation fault
4.…
Enumeration
Enumerated Values:
1activeok
2selfcheckfault
3loopback1operfault
4loopback1cancelfault
5loopback1crccheckfault
6activent1fault
7nt1crccheckfault
8ufaultloopback0succ
9loopback2operfault
10loopbackcancelfault
11loopback2crccheckfault
12noterminal
13timeout
14userstopsucc
15exceptstop
16nt1fault
17testcanceled
 .1.3.6.1.4.1.2011.6.21.2.1.1.31.1.5
hwISDNDiagnoseTestCRCErrNum
Indicates the CRC error's number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.31.1.6
hwISDNDiagnoseTestDeferredTestFlag
deferred test flag.
Options:
1. immediatetest(1) -indicates immediate test;
2. deferredtest(2) -indicates deferred test: Initiated when the port is in service. If the port is busy, the test operation
…
Enumerationr/w
Enumerated Values:
1immediatetest
2deferredtest
 .1.3.6.1.4.1.2011.6.21.2.1.1.31.1.7
hwISDNDiagnoseTestDeferredTime
Deferred time(Unit: minute):
this leaf node is valid only when the value of hwISDNDiagnoseTestDeferredTestFlag is deferredtest(2).
Range: 1-1440
Default: 30(minute)
Integer32r/w
Constraints:
range: 1-1440
 .1.3.6.1.4.1.2011.6.21.2.1.1.31.1.8
hwISDNDiagnoseTestTimeoutProc
timeout proc:
Options:
1. notest(1) -when deferred time out, if the port is still in service, line diagnose test will be canceled;
2. test(2) -when deferred time out, if the port is still in service, line diagnose t…
Enumerationr/w
Enumerated Values:
1notest
2test
 .1.3.6.1.4.1.2011.6.21.2.1.1.31.1.9
hwISDNDiagnoseTestCrcDetectPeriod
The CRC Check Period in Test.
Unit:second
Range:10-86400
Integer32r/w
Constraints:
range: 10-86400
 .1.3.6.1.4.1.2011.6.21.2.1.1.31.1.10
hwISDNDiagnoseTestRequestID
Request ID
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.31.1.11

hwPstnCallEmulateOprTable

table
.1.3.6.1.4.1.2011.6.21.2.1.1.32 · 1 row entry · 10 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPstnCallEmulateOprTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTEST-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTEST-MIB::hwPstnCallEmulateOprTable' 
Operation table for the PSTN call emulation test (called party). It realizes the 
function of the PSTN call emulation test (called party). This test helps check whether a subscriber port can 
make calls normally as a called party.
The index of this table is hwPstnCallEmulateIndex
hwPstnCallEmulateOprEntry row .1.3.6.1.4.1.2011.6.21.2.1.1.32.1
Operation table for the PSTN call emulation test (called party). It realizes the
function of the PSTN call emulation test (called party). This test helps check whether a subscriber port can
make calls normally as a ca…
Indexes
Column Syntax OID
hwPstnCallEmulateIndex
Call emulation index
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.32.1.1
hwPstnCallEmulateOprType
Operation type.
Options:
1. stop(1) -stop the test
2. start(2) -start the test
Enumerationr/w
Enumerated Values:
1stop
2start
 .1.3.6.1.4.1.2011.6.21.2.1.1.32.1.2
hwPstnCallEmulateCallerIfindex
Calling port of the call emulation test
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.32.1.3
hwPstnCallEmulateCalledIfindex
Called port of the call emulation test
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.32.1.4
hwPstnCallEmulateCalledTelNo
Called telephone number (max length: 32)
OctetStringr/w
Constraints:
range: 32-32
 .1.3.6.1.4.1.2011.6.21.2.1.1.32.1.5
hwPstnCallEmulateTestStatus
Test Status.
Options:
1. nodialtone(1) -indicates No dial tone
2. dialfailed(2) -indicates Dialup fails
3. callednumbernotmatch(3) -indicates The called number does not match
4. callednotpickuppho…
Enumeration
Enumerated Values:
1nodialtone
2dialfailed
3callednumbernotmatch
4callednotpickupphone
5testOK
6testfailed
 .1.3.6.1.4.1.2011.6.21.2.1.1.32.1.6
hwPstnCallEmulateTestResult
Emulational Call Test Result
Options:
1. callerNoDialTone(1) -indicates the caller does not have dial tone
2. callerNoDial(2) -indicates the caller does not dial
3. telNumNoMatch(3) …
Enumeration
Enumerated Values:
1callerNoDialTone
2callerNoDial
3telNumNoMatch
4callerRelease
5testSucceed
6callRelease
7calledRelease
8callerMatchNoCompleted
9callerSendNoCompleted
10calledMatchNoCompleted
11calledSendNoCompleted
12callerOffHookingBusy
13callerDialogingBusy
14callerMatchFailed
15calledMatchFailed
16callerPortAbnormal
17calledPortAbnormal
 .1.3.6.1.4.1.2011.6.21.2.1.1.32.1.7
hwPstnCallEmulateTestCallerDTMFDetected
Emulational Call Test Caller Detected Dtmf Num List
OctetString
Constraints:
range: 64-64
 .1.3.6.1.4.1.2011.6.21.2.1.1.32.1.8
hwPstnCallEmulateTestCalleeDTMFDetected
Emulational Call Test Callee Detected Dtmf Num List
OctetString
Constraints:
range: 64-64
 .1.3.6.1.4.1.2011.6.21.2.1.1.32.1.9
hwPstnCallEmulateTestRequestID
Request ID
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.32.1.10

hwPstnLoopTestOprTable

table
.1.3.6.1.4.1.2011.6.21.2.1.1.33 · 1 row entry · 8 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPstnLoopTestOprTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTEST-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTEST-MIB::hwPstnLoopTestOprTable' 
Loop test table
The index of this table is hwPstnLoopTestSerialNo
hwPstnLoopTestOprEntry row .1.3.6.1.4.1.2011.6.21.2.1.1.33.1
Loop test table
The index of this entry is hwPstnLoopTestSerialNo
Indexes
Column Syntax OID
hwPstnLoopTestSerialNo
Test serial number
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.33.1.1
hwPstnLoopTestDestIfIndex
Target port ID
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.33.1.2
hwPstnLoopTestAssistIfIndex
Assistant port ID
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.33.1.3
hwPstnLoopTestOprType
Operation type.
Options:
1. start(1) -indicates start the test
2. stop(2) -indicates stop the test
Enumerationr/w
Enumerated Values:
1start
2stop
 .1.3.6.1.4.1.2011.6.21.2.1.1.33.1.4
hwPstnLoopTestResult
Test status:
1. Succeed; 2. Offhook on the target subscriber port fails; 3. Offhook on the assistant subscriber port fails; 4. Onhook on the target subscriber port fails; 5. Onhook on the assistant subscriber port fails…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.33.1.5
hwPstnLoopTestMode
Test mode
Options:
1. hardwaretest(1) -indicates it is a hardware test
2. systemtest(2) -indicates it is a systen test
Enumerationr/w
Enumerated Values:
1hardwaretest
2systemtest
 .1.3.6.1.4.1.2011.6.21.2.1.1.33.1.6
hwPstnLoopTestDestTelNo
Telephone number of the target port (the maximum length is 16)
OctetStringr/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.2011.6.21.2.1.1.33.1.7
hwPstnLoopTestRequestID
Request ID
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.33.1.8

hwLineTestParaTable

table
.1.3.6.1.4.1.2011.6.21.2.1.1.35 · 1 row entry · 8 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwLineTestParaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTEST-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTEST-MIB::hwLineTestParaTable' 
pots test para config table
The index of this table is hwLineTestParaFrameIndex and hwLineTestParaSlotIndex
hwLineTestParaEntry row .1.3.6.1.4.1.2011.6.21.2.1.1.35.1
pots test para config table
The index of this entry is hwLineTestParaFrameIndex and hwLineTestParaSlotIndex
Indexes
Column Syntax OID
hwLineTestParaOprType
The operation type of Test para config.
Options:
1. configure(1) -configure the value of physical layer test para
2. restore(2) -restore the value of physical layer test para
3. invalid(-1) -invalid value
Enumerationr/w
Enumerated Values:
-1invalid
1configure
2restore
 .1.3.6.1.4.1.2011.6.21.2.1.1.35.1.1
hwLineTestParaFrameIndex
Indicates the frameID of configuring test para.
Range: 0-255|-1
Integer32
Constraints:
range: -1-255
 .1.3.6.1.4.1.2011.6.21.2.1.1.35.1.2
hwLineTestParaSlotIndex
Indicates the slotID of configuring test para.
Range: 0-255|-1
Integer32
Constraints:
range: -1-255
 .1.3.6.1.4.1.2011.6.21.2.1.1.35.1.3
hwLineTestParaPv
Indicates the peak line test voltage of permitted sending.
Range: 0-100000|-1
Default: 50000
Unit: mV
Integer32r/w
Constraints:
range: -1-100000
 .1.3.6.1.4.1.2011.6.21.2.1.1.35.1.4
hwLineTestParaAcF
Indicates the AC signal frequency when testing the capacitance and catheter.
Range: 10-1000|-1
Default: 25
Unit: Hz
Integer32r/w
Constraints:
range: -1--1
range: 10-1000
 .1.3.6.1.4.1.2011.6.21.2.1.1.35.1.5
hwLineTestParaPitF
Indicates the frequency of line test voice.
Range: 300-3400|-1
Default: 800
Unit: Hz
Integer32r/w
Constraints:
range: -1--1
range: 300-3400
 .1.3.6.1.4.1.2011.6.21.2.1.1.35.1.6
hwLineTestParaMaxfeScv
Indicates the max voltage of Signature test.
Range: 0-50000|-1
Default: 50000
Unit: mV
Step: 1000
Integer32r/w
Constraints:
range: -1-50000
 .1.3.6.1.4.1.2011.6.21.2.1.1.35.1.7
hwLineTestParaMinfeScv
Indicates the min voltage of Signature test.
Range: 0-50000|-1
Default: 3000
Unit: mV
Step: 1000
Integer32r/w
Constraints:
range: -1-50000
 .1.3.6.1.4.1.2011.6.21.2.1.1.35.1.8

hwMonitorTestOprTable

table
.1.3.6.1.4.1.2011.6.21.2.1.1.36 · 1 row entry · 6 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMonitorTestOprTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-NTEST-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-NTEST-MIB::hwMonitorTestOprTable' 
monitor test table
The index of this table is ifIndex
hwMonitorTestOprEntry row .1.3.6.1.4.1.2011.6.21.2.1.1.36.1
monitor test table
The index of this entry is ifIndex
Indexes
Column Syntax OID
hwMonitorTestAGV
Monitor test A->ground voltage.
Unit: millivolt, mV
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.36.1.1
hwMonitorTestBGV
Monitor test B->ground voltage.
Unit: millivolt, mV
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.36.1.2
hwMonitorTestLongitudinalCurrent
Monitor test Longitudinal Current.
Unit: uA
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.36.1.3
hwMonitorTestTransversalCurrent
Monitor test Transversal Current.
Unit: uA
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.36.1.4
hwMonitorTestBatteryVoltage
Monitor test Battery Voltage.
Unit: millivolt, mV
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.36.1.5
hwMonitorTestSLICTemperature
Monitor test SLIC Temperature.
Unit: oC
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.21.2.1.1.36.1.6