hwMplsOamL2vcDefectType
HUAWEI-MPLSOAM-MIB ·
.1.3.6.1.4.1.2011.5.12.7.1.1.6.1.17
Object
column
Enumeration
0: no defect; 1: dServer, 2: dPeerMe, 3: dLOCV, Loss of Connectivity Verification defect; 4: dTTSIMismatch, Trail Termination Source Identifier Mismatch defect; 5: dTTSIMismerge, Trail Termination Source Identifier Mismerge defect.; 6: dExcess, Receiving excess rate of CV/FFD; 7: dUnknown, Unknown defect in the MPLS network. 8: dOamFail, AutoProtocal timer expires. 9: pwDown, PW down.
Context
- MIB
- HUAWEI-MPLSOAM-MIB
- OID
.1.3.6.1.4.1.2011.5.12.7.1.1.6.1.17- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwMplsOamL2vcEntry
- Table
- hwMplsOamL2vcTable
- Siblings
- 20
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | nondefect |
1 | dServer |
2 | dPeerMe |
3 | dLOCV |
4 | dTTSIMismatch |
5 | dTTSIMismerge |
6 | dExcess |
7 | dUnknown |
8 | dOamFail |
9 | pwDown |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwMplsOamL2vcPeerIp This object indicates the peer ip address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.12.7.1.1.6.1.1 |
| hwMplsOamL2vcRevDetFreq For CV: the frequency is static, per second.
For FFD: the frequency is set by user. The value
can be 10ms, 20ms, 50ms,100ms,200ms,500ms,3ms.
Any other frequency is wrong.
0: 100… | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.6.1.10 |
| hwMplsOamL2vcSendEnable 0: The OAM Send function is Disabled;
1: The OAM Send function is Eabled; | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.6.1.11 |
| hwMplsOamL2vcReceiveEnable 0: The OAM Receive function is Disabled;
1: The OAM Receive function is Eabled; | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.6.1.12 |
| hwMplsOamL2vcAutoProlEn 0: disable;
1: enable; | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.6.1.13 |
| hwMplsOamL2vcAutoOvertime If the oam receives CV/FFD, it records the parameters
included in the packet, such as OAM type and frequency.
If the oam does not receive any CV/FFD packet before the timer
expir… | column | Integer32 | .1.3.6.1.4.1.2011.5.12.7.1.1.6.1.14 |
| hwMplsOamL2vcValid 1: stop detect;
2: start detect;
3: ready. | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.6.1.15 |
| hwMplsOamL2vcAvaState 0: available state;
1: unavailable state. | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.6.1.16 |
| hwMplsOamL2vcBdiDefectType 0: no defect;
1: dServer,
2: dPeerMe,
3: dLOCV, Loss of Connectivity Verification defect;
4: dTTSIMismatch, Trail Termination Source Identifier Mismatch defect;
5: dTTSIMismerge, … | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.6.1.18 |
| hwMplsOamL2vcVcType There are seventeen types of vc.
1: fr;
2: atmAal5Sdu;
3: atmTransCell;
4: vlan;
5: ethernet;
6: hdlc;
7: ppp;
9: atmNto1Vcc;
10:atmNto1Vpc;
11:ipLayer2;
12:atm1to1Vcc;
13:atm1to1… | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.6.1.2 |
| hwMplsOamL2vcVcId This object indicates the vc id of pw type. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.12.7.1.1.6.1.3 |
| hwMplsOamL2vcRowStatus This variable is used to create, modify, and
delete a row in this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.12.7.1.1.6.1.30 |
| hwMplsOamL2vcCompatibilityMode 1: ptnMode;
2: routerMode;
Valid only for the l2vc configuration. | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.6.1.31 |
| hwMplsOamL2vcBDIFreq BDI is generated at the trail termination source point of
a return path in response to a defect detected at the trail
termination sink point of an LSP in the forwarding directio… | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.6.1.32 |
| hwMplsOamL2vcRemotePeerIp This object indicates the remote peer ip address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.12.7.1.1.6.1.4 |
| hwMplsOamL2vcRemoteVcType There are seventeen types of vc.
1: fr;
2: atmAal5Sdu;
3: atmTransCell;
4: vlan;
5: ethernet;
6: hdlc;
7: ppp;
9: atmNto1Vcc;
10:atmNto1Vpc;
11:ipLayer2;
12:atm1to1Vcc;
13:atm1to1… | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.6.1.5 |
| hwMplsOamL2vcRemoteVcId This object indicates the remote vc id of pw type. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.12.7.1.1.6.1.6 |
| hwMplsOamL2vcDetType There are two types of OAM packets, CV and FFD.
1: CV;
2: FFD. | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.6.1.7 |
| hwMplsOamL2vcDetFreq For CV: the frequency is static, per second.
For FFD: the frequency is set by user. The value
can be 10ms, 20ms, 50ms,100ms,200ms,500ms,3ms.
Any other frequency is wrong.
0: 1000… | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.6.1.8 |
| hwMplsOamL2vcRevDetType 0: invalid;
1: CV;
2: FFD. | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.6.1.9 |