hwMplsOamIgrValid
HUAWEI-MPLSOAM-MIB ·
.1.3.6.1.4.1.2011.5.12.7.1.1.2.1.10
Object
column
Enumeration
0: stop detect; 1: start detect.
Context
- MIB
- HUAWEI-MPLSOAM-MIB
- OID
.1.3.6.1.4.1.2011.5.12.7.1.1.2.1.10- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwMplsOamIgrEntry
- Table
- hwMplsOamIgrTable
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | stop |
1 | start |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwMplsOamIgrIndex The interface index of the detected tunnel. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.12.7.1.1.2.1.1 |
| hwMplsOamIgrAvaState If the LSP Timer (T1) expires, then the LSP enters the
Unavailable state. The start point of the Unavailable state
is deemed to be at the entry into the LSP defect state.
An LSP… | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.2.1.11 |
| hwMplsOamIgrDefectType Defect is defined as interruption of the capability of a
transport entity (e.g., network connection) to transfer user
or OAM information. There are six types of defect:
0: no de… | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.2.1.12 |
| hwMplsOamIgrRowStatus This variable is used to create, modify, and
delete a row in this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.12.7.1.1.2.1.13 |
| hwMplsOamIgrCompatibilityMode 1: PtnMode;
2: RouterMode;
Valid only for the ingress configuration. | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.2.1.14 |
| hwMplsOamIgrBDIFreq BDI is generated at the trail termination source point of
a return path in response to a defect detected at the trail
termination sink point of an LSP in the forwarding directio… | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.2.1.15 |
| hwMplsOamIgrTunnName The name of a tunnel.
For ingress, it means the tunnel name of the detected LSP.
For egress, it means the tunnel name of the reverse LSP. | column | OctetString | .1.3.6.1.4.1.2011.5.12.7.1.1.2.1.2 |
| hwMplsOamIgrDetType There are two types of OAM packets, CV and FFD.
The CV flow is generated at the source LSR of the LSP with
a nominal frequency of 1/s and terminated at the sink LSR of the LSP.
FF… | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.2.1.3 |
| hwMplsOamIgrDetFreq For CV: the frequency is static, per second.
For FFD: the frequency is set by user. The value
can be 10ms, 20ms, 50ms,100ms,200ms,500ms,3ms.
Any other frequency is wrong.
0: 1000… | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.2.1.4 |
| hwMplsOamIgrRevType When an LSP is found to be in defect, the sink LSR if the LSP
should send BDI to inform the source LSR of the LSP, the BDI is
transferred through the reverse LSP.
The type of rev… | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.2.1.5 |
| hwMplsOamIgrRevLspName The object indicates name of the reverse LSP. | column | OctetString | .1.3.6.1.4.1.2011.5.12.7.1.1.2.1.6 |
| hwMplsOamIgrRevLsrId Only for ingress, the object indicates the ingress LSR ID of the
reverse LSP,, expressed in IP address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.12.7.1.1.2.1.7 |
| hwMplsOamIgrRevSessTunnId Only for ingress, the object indicates the session tunnel ID of
the reverse LSP. | column | Integer32 | .1.3.6.1.4.1.2011.5.12.7.1.1.2.1.8 |
| hwMplsOamIgrEnable Whether one LSP is OAM enable.
If disable, LSP is not monitored;
If enable, CV/FFD is generated at the source LSR of the LSP and
checked at the sink LSR of the LSP,and user can s… | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.2.1.9 |