hwMplsOamIgrDefectType – HUAWEI-MPLSOAM-MIB

Object

column Enumeration

Defect is defined as interruption of the capability of a 
transport entity (e.g., network connection) to transfer user 
or OAM information. There are six types of defect:
0: no defect;
1: dServer;
2: dPeerMe;
3: dLOCV, Loss of Connectivity Verification defect;
4: dTTSIMismatch, Trail Termination Source Identifier Mismatch defect;
5: dTTSIMismerge, Trail Termination Source Identifier Mismerge defect;
6: dExcess, Receiving excess rate of CV/FFD;
7: dUnknown, Unknown defect in the MPLS network..
8: dOamFail, AutoProtocal timer expires.
9: dIngressDown.

Context

MIB: HUAWEI-MPLSOAM-MIB
OID: .1.3.6.1.4.1.2011.5.12.7.1.1.2.1.12
Type: column
Access: readonly
Status: current
Parent: hwMplsOamIgrEntry
Table: hwMplsOamIgrTable
Siblings: 14

Syntax

Enumeration

Values & Constraints

Enumerated Values

`0`	nondefect
`1`	dServer
`2`	dPeerMe
`3`	dLOCV
`4`	dTTSIMismatch
`5`	dTTSIMismerge
`6`	dExcess
`7`	dUnknown
`8`	dOamFail
`9`	dIngressDown

Related Objects

Sibling Objects

Object	Type	Syntax	OID
hwMplsOamIgrIndex The interface index of the detected tunnel.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.2011.5.12.7.1.1.2.1.1`
hwMplsOamIgrValid 0: stop detect; 1: start detect.	column	Enumeration	`.1.3.6.1.4.1.2011.5.12.7.1.1.2.1.10`
hwMplsOamIgrAvaState If the LSP Timer (T1) expires, then the LSP enters the Unavailable state. The start point of the Unavailable state is deemed to be at the entry into the LSP defect state. An LSP…	column	Enumeration	`.1.3.6.1.4.1.2011.5.12.7.1.1.2.1.11`
hwMplsOamIgrRowStatus This variable is used to create, modify, and delete a row in this table.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.2011.5.12.7.1.1.2.1.13`
hwMplsOamIgrCompatibilityMode 1: PtnMode; 2: RouterMode; Valid only for the ingress configuration.	column	Enumeration	`.1.3.6.1.4.1.2011.5.12.7.1.1.2.1.14`
hwMplsOamIgrBDIFreq BDI is generated at the trail termination source point of a return path in response to a defect detected at the trail termination sink point of an LSP in the forwarding directio…	column	Enumeration	`.1.3.6.1.4.1.2011.5.12.7.1.1.2.1.15`
hwMplsOamIgrTunnName The name of a tunnel. For ingress, it means the tunnel name of the detected LSP. For egress, it means the tunnel name of the reverse LSP.	column	OctetString	`.1.3.6.1.4.1.2011.5.12.7.1.1.2.1.2`
hwMplsOamIgrDetType There are two types of OAM packets, CV and FFD. The CV flow is generated at the source LSR of the LSP with a nominal frequency of 1/s and terminated at the sink LSR of the LSP. FF…	column	Enumeration	`.1.3.6.1.4.1.2011.5.12.7.1.1.2.1.3`
hwMplsOamIgrDetFreq For CV: the frequency is static, per second. For FFD: the frequency is set by user. The value can be 10ms, 20ms, 50ms,100ms,200ms,500ms,3ms. Any other frequency is wrong. 0: 1000…	column	Enumeration	`.1.3.6.1.4.1.2011.5.12.7.1.1.2.1.4`
hwMplsOamIgrRevType When an LSP is found to be in defect, the sink LSR if the LSP should send BDI to inform the source LSR of the LSP, the BDI is transferred through the reverse LSP. The type of rev…	column	Enumeration	`.1.3.6.1.4.1.2011.5.12.7.1.1.2.1.5`
hwMplsOamIgrRevLspName The object indicates name of the reverse LSP.	column	OctetString	`.1.3.6.1.4.1.2011.5.12.7.1.1.2.1.6`
hwMplsOamIgrRevLsrId Only for ingress, the object indicates the ingress LSR ID of the reverse LSP,, expressed in IP address.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.2011.5.12.7.1.1.2.1.7`
hwMplsOamIgrRevSessTunnId Only for ingress, the object indicates the session tunnel ID of the reverse LSP.	column	Integer32	`.1.3.6.1.4.1.2011.5.12.7.1.1.2.1.8`
hwMplsOamIgrEnable Whether one LSP is OAM enable. If disable, LSP is not monitored; If enable, CV/FFD is generated at the source LSR of the LSP and checked at the sink LSR of the LSP,and user can s…	column	Enumeration	`.1.3.6.1.4.1.2011.5.12.7.1.1.2.1.9`