hwLdpLastLocalAdjDownTable
HUAWEI-MPLSLDP-MIB ·
.1.3.6.1.4.1.2011.5.25.143.1.77
Object
table
This object indicates that the last local adjacency in the local-and-remote LDP session went Down due to hello timeout. The index of this entry is hwLdpVrfName, hwLdpAdjPeerLsrId.
Context
- MIB
- HUAWEI-MPLSLDP-MIB
- OID
.1.3.6.1.4.1.2011.5.25.143.1.77- Type
- table
- Status
- current
- Parent
- hwMplsLdpInfo
- Siblings
- 56
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwMplsLdpProcessName This object indicates the process name of LDP running on the router. By default, the value is LDP. | scalar | OctetString | .1.3.6.1.4.1.2011.5.25.143.1.1 |
| hwLdpLsrId This object indicates the way to change the LDP LSR ID.
The default LDP LSR ID has the same value as the MPLS LSR ID.
It is recommended not to change the LDP LSR ID unless neces… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.25.143.1.10 |
| hwLdpPropagateIpPrefix This object indicates the configuration or deletion of the transit policy for the LDP.
The object has a valid length ranging from 1 to 169 characters.
The length 0 characters sh… | scalar | OctetString | .1.3.6.1.4.1.2011.5.25.143.1.11 |
| hwLdpGlobalRemotePwe3 This object indicates the configuration or deletion of the policy for the LDP remote session.
When the object is enabled, it is forbidden to send mapping message to the remote pe… | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.143.1.12 |
| hwLdpMtuSignaling This object indicates the configuration or deletion of the MTU signaling function.
By default, the MTU signaling function is enabled, and the MTU TLV type in the LDP message is 0… | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.143.1.13 |
| hwLdpMtuApplyTlv This object conflicts with the object hwLdpMtuSignaling.
If the object is enabled, it indicates that the MTU TLV type in the LDP message is 0x601 according to the RFC 3988. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.143.1.14 |
| hwLdpGrCapabilityConfig This object indicates the configuration or deletion of the LDP GR capability. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.143.1.15 |
| hwLdpGrNeighborLivenessTimer This object indicates the way to configure the value of GR neighbor life timer.
When the status of hwLdpGrCapabilityConfig is enabled, the default value returned by the object is … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.143.1.16 |
| hwLdpGrReconnectTimer This object indicates the way to configure the value of GR reconnect timer.
When the status of hwLdpGrCapabilityConfig is enabled, the default value returned by the object is vali… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.143.1.17 |
| hwLdpGrRecoveryTimer This object indicates the way to configure the value of GR recovery timer.
When the status of hwLdpGrCapabilityConfig is enabled, the default value returned by the object is valid… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.143.1.18 |
| hwMplsLspTrigger This object indicates the way to configure the LDP policy for the ingress LSP and egress LSP.
Options:
1. all(1) -indicates that all FECs are triggered for the IGP.
2. none(2… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.143.1.19 |
| hwMplsLdpLspFec This object indicates the destination address of an LSP.
The value is either a destination IP address or a prefix of an IP address. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.143.1.2 |
| hwMplsLspTriggerIpPrefix This object indicates the IP prefix when configuring the LDP policy for the ingress LSP and egress LSP.
The object has a valid length ranging from 1 to 169 characters.
If the obj… | scalar | OctetString | .1.3.6.1.4.1.2011.5.25.143.1.20 |
| hwMplsLspTriggerBgpRoute This object indicates the policy of triggering the BGP route to create the LDP LSP.
Default: disabled | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.143.1.21 |
| hwMplsLspTriggerBgpRouteIpPrefix This object indicates the IP prefix when triggering the BGP route to create the LDP LSP.
The object has a valid length ranging from 1 to 169 characters. | scalar | OctetString | .1.3.6.1.4.1.2011.5.25.143.1.22 |
| hwLdpReset This object indicates the reset of the LDP protocol.
Options:
1. reset(1) -indicates the reset of the LDP protocol.
2. resetall(2) -indicates the reset of all LDP instances.
3.… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.143.1.23 |
| hwLdpOutBoundSplitHorizonAll This object indicates the way to set the flag of global split horizon.
Default: disabled | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.143.1.24 |
| hwLdpDeleteGtsmAll This object indicates the deletion of the global GTSM configurations.
Options:
1. delete(1) -indicates that global GTSM configurations are to be deleted.
2. ready(2) -indicates t… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.143.1.25 |
| hwMplsFrrLspTrigger This object indicates the way to configure the LDP policy of global instance for LDP Auto FRR.
If the object is set as ipprefix, the value of hwMplsFrrLspTriggerIpPrefix must be s… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.143.1.26 |
| hwMplsFrrLspTriggerIpPrefix This object indicates the IP prefix when configuring LDP Auto FRR for the public network instance.
The object has a valid length ranging from 1 to 169 characters.
If the object i… | scalar | OctetString | .1.3.6.1.4.1.2011.5.25.143.1.27 |
| hwLdpBackOffTimerInit This object indicates the initial value of backoff timer.
Default: 15
Unit: seconds | scalar | Integer32 | .1.3.6.1.4.1.2011.5.25.143.1.28 |
| hwLdpBackOffTimerMax This object indicates the maximum value of backoff timer.
Default: 120
Unit: seconds | scalar | Integer32 | .1.3.6.1.4.1.2011.5.25.143.1.29 |
| hwMplsLdpLspInLabel This object indicates that labels are pushed into all the packets for direct MPLS forwarding. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.143.1.3 |
| hwLdpLongestMatch This object indicates that the LDP is enabled with the function of searching for routes according to the longest match rule to establish LSPs.
Default: disabled | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.143.1.30 |
| hwLdpRemotePeerAutoDodRequest The value of this object identifies whether the remote peer is globally enabled with the capability of automatically sending a DoD request. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.143.1.37 |
| hwLdpCapabilityAnnouncementConfig The value of this object identifies whether LDP has Capability-Announcement ability. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.143.1.38 |
| hwMplsLdpLspOutLabel This object indicates that all the packets swap labels for MPLS forwarding. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.143.1.4 |
| hwMplsLdpLspOutIfIndex The value of this object identifies the index of the outgoing interface of the LSP. | scalar | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2011.5.25.143.1.5 |
| hwLdpVpnTable This object is used to configure or delete the LDP multi-instance.
Make sure the relevant VPN instance is already created. | table | - | .1.3.6.1.4.1.2011.5.25.143.1.50 |
| hwLdpRemoteEntityTable This object is used to configure or delete the LDP remote peer. | table | - | .1.3.6.1.4.1.2011.5.25.143.1.51 |
| hwLdpPeerTable This object is used to configure the LDP peer. | table | - | .1.3.6.1.4.1.2011.5.25.143.1.52 |
| hwLdpVpnPeerTable This table is used to create and delete peer configurations in the LDP multi-instance.
Make sure the corresponding LDP VPN-instance is already created in hwLdpVpnTable. | table | - | .1.3.6.1.4.1.2011.5.25.143.1.53 |
| hwLdpInterfaceTable This table is used to configure or delete the LDP capability on the interface. | table | - | .1.3.6.1.4.1.2011.5.25.143.1.54 |
| hwLdpPeerGroupTable This table is used to configure an LDP peer group. | table | - | .1.3.6.1.4.1.2011.5.25.143.1.58 |
| hwLdpOutBoundPolicyPeerAllRange This object indicates the range of IGP routes for a global outbound LDP policy. The default value is all.
If the object is set as ipprefix, the value of hwLdpOutBoundPolicyPeerAll… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.143.1.59 |
| hwMplsLdpLspDownReason This object indicates the cause that the LSP becomes Down.
Options:
1. routeDelete(1) -indicates that a route has been deleted.
2. lspmNotify(2) -indicates that… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.143.1.6 |
| hwLdpOutBoundPolicyPeerAllFecIpPrefix This object indicates the IP prefix list name of IGP routes for a global outbound LDP policy. The default value is NULL.
If the object is set with a value, the value of hwLdpOutB… | scalar | OctetString | .1.3.6.1.4.1.2011.5.25.143.1.60 |
| hwLdpOutBoundPolicyPeerAllBgpRange This object indicates the range of BGP routes for a global outbound LDP policy. The default value is all.
If the object is set as ipprefix, the value of hwLdpOutBoundPolicyPeerAll… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.143.1.61 |
| hwLdpOutBoundPolicyPeerAllBgpIpPrefix This object indicates the IP prefix list name of BGP routes for a global outbound LDP policy. The default value is NULL.
If the object is set with a value, the value of hwLdpOutB… | scalar | OctetString | .1.3.6.1.4.1.2011.5.25.143.1.62 |
| hwLdpInBoundPolicyPeerAllRange This object indicates the range of routes for a global inbound LDP policy. The default value is all.
If the object is set as ipprefix, the value of hwLdpInBoundPolicyPeerAllIpPref… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.143.1.63 |
| hwLdpInBoundPolicyPeerAllIpPrefix This object indicates the IP prefix list name of routes for a global inbound LDP policy. The default value is NULL.
If the object is set with a value, the value of hwLdpInBoundPo… | scalar | OctetString | .1.3.6.1.4.1.2011.5.25.143.1.64 |
| hwLdpGracefulDeleteCapability This object indicates whether the LDP graceful-delete capability is enabled. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.143.1.65 |
| hwLdpGracefulDeleteTimer The value of this object identifies the value of a graceful-delete timer.
When the status of hwLdpGracefulDeleteCapability is enabled, the default value returned by the object is… | scalar | Integer32 | .1.3.6.1.4.1.2011.5.25.143.1.66 |
| hwLdpLspDownReason The LDP LSP down reason.
Options:
1. other(1) -indicates other reasons.
2. session down(2) -indicates the ldp session went down.
3. route change(… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.143.1.67 |
| hwLdpLspDownMplsLsrId This object indicates the LSR ID of failed router. | scalar | MPLS-TC-STD-MIBMplsLsrIdentifier | .1.3.6.1.4.1.2011.5.25.143.1.68 |
| hwLdpLspDownOutIfIndex This object indicates the outgoing interface index of the failed router. | scalar | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2011.5.25.143.1.69 |
| hwMplsLdpSessionTable This table describes LDP session parameters, including the index of an interface of a session, the cause for a session Down event, and time elapsed since a session was established. | table | - | .1.3.6.1.4.1.2011.5.25.143.1.7 |
| hwLdpLspDownOutIfMainIp This object indicates the main ip address of the failed router's outgoing interface. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.25.143.1.70 |
| hwLdpLspDownOutIfState The state of the failed router's outgoing interface.
Options:
1. up(1) -indicates that the state of the outgoing interface is Up.
2. down(2) -indicates that the state of … | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.143.1.71 |
| hwLdpLspDownDownstreamPeerLsrId This object indicates the failed router's downstream peer's LSR ID. | scalar | MPLS-TC-STD-MIBMplsLdpIdentifier | .1.3.6.1.4.1.2011.5.25.143.1.72 |
| hwLdpSessionStatistics | node | - | .1.3.6.1.4.1.2011.5.25.143.1.73 |
| hwLdpMultiLinkCfgTable This object indicates that MPLS LDP multi-link (include local and remote coexist) configurations are inconsistent.
The index of this entry is hwMplsLdpVrfIndex,hwMplsLdpPeerLdpId,… | table | - | .1.3.6.1.4.1.2011.5.25.143.1.74 |
| hwLdpPeerAddressTable This object indicates that peer address count has exceeded the total count.
The index of this entry is hwLdpPeerAddressLsrId and hwLdpPeerVrfIndex. | table | - | .1.3.6.1.4.1.2011.5.25.143.1.75 |
| hwLdpMappingTable This object indicates that mapping count has exceeded the total count.
The index of this entry is hwLdpMappingType and hwLdpVrfIndex. | table | - | .1.3.6.1.4.1.2011.5.25.143.1.76 |
| hwMplsLdpSessionStateTable This object is used to display the detailed state parameters of the session. | table | - | .1.3.6.1.4.1.2011.5.25.143.1.8 |
| hwLdpCapabilityConfig This object indicates the global configuration or deletion of the LDP capability.
Before enabling LDP capability, ensure that the MPLS capability is enabled globally. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.143.1.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwLdpLastLocalAdjDownEntry This object indicates that the last local adjacency in the local-and-remote LDP session went Down due to hello timeout.
The index of this entry is hwLdpVrfName, hwLdpAdjPeerLsrId. | row | - | .1.3.6.1.4.1.2011.5.25.143.1.77.1 |