HUAWEI-MPLSLDP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
12
Rows
12
Columns
101

hwMplsLdpSessionTable

table
.1.3.6.1.4.1.2011.5.25.143.1.7 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMplsLdpSessionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MPLSLDP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MPLSLDP-MIB::hwMplsLdpSessionTable' 
This table describes LDP session parameters, including the index of an interface of a session, the cause for a session Down event, and time elapsed since a session was established.
hwMplsLdpSessionEntry row .1.3.6.1.4.1.2011.5.25.143.1.7.1
This object is used to display the session parameters and session age.
The index of this entry is hwMplsLdpSessionPeerLsrId.
Indexes
Column Syntax OID
hwMplsLdpSessionPeerLsrId
This object indicates the LSR ID of the peer in a session.
MPLS-TC-STD-MIBMplsLdpIdentifier
Type Constraints:
range: 6
 .1.3.6.1.4.1.2011.5.25.143.1.7.1.1
hwMplsLdpSessionIfIndex
This object indicates the index of the interface on which the session is established.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.143.1.7.1.2
hwMplsLdpSessionDownReason
This object indicates the cause that the session becomes Down.
Options:
1. sessionUp(0) -indicates that the session was Up.
2. helloHoldTimerExp(1) -indicates that the Hello hold timer expired.…
Enumeration
Enumerated Values:
0sessionUp
1helloHoldTimerExp
2ssnHoldTimerExp
3resetMplsLdp
4undoMplsLdp
5undoMpls
6undoMplsLdpRemotePeer
7modifyGRConfig
8modifyGRTimer
9modifyKeepaliveTimer
10modifyMD5Config
11ssnRoleSwitch
12modifyMTUConfig
13modifyTransportAddress
14modifyLDPLsrID
15recvNotification
16transportAddressNotMatch
17protocolGR
18ifStatusChanged
19tcpDown
20otherReason
21sentNotification
22canntBuildSessionRelation
23receiveErrorMessageFromPeer
24receiveSocketError
25sessionDelete
26modifyCapabilityAnnouncementConfig
27modifyLocalLsrID
28modifyP2MP
29modifyMP2MP
30sessionProtectTimerExp
31rlfaIidDel
32excessiveMessagesReceived
33configICCP
34packetSendReceiveError
35socketSetOptError
36receiveSocketClose
 .1.3.6.1.4.1.2011.5.25.143.1.7.1.3
hwMplsLdpSessionAge
This object indicates the duration since the session is set up.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.143.1.7.1.4

hwMplsLdpSessionStateTable

table
.1.3.6.1.4.1.2011.5.25.143.1.8 · 1 row entry · 16 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMplsLdpSessionStateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MPLSLDP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MPLSLDP-MIB::hwMplsLdpSessionStateTable' 
This object is used to display the detailed state parameters of the session.
hwMplsLdpSessionStateEntry row .1.3.6.1.4.1.2011.5.25.143.1.8.1
This object is used to display the detailed state parameters of the session.
The index of this entry is hwMplsLdpSessionPeerId.
Indexes
Column Syntax OID
hwMplsLdpSessionPeerId
This object indicates the LSR ID of the LDP peer to which the session is connected.
MPLS-TC-STD-MIBMplsLdpIdentifier
Type Constraints:
range: 6
 .1.3.6.1.4.1.2011.5.25.143.1.8.1.1
hwMplsLdpSessionLsrId
This object indicates the ID of the local LSR.
MPLS-TC-STD-MIBMplsLdpIdentifier
Type Constraints:
range: 6
 .1.3.6.1.4.1.2011.5.25.143.1.8.1.2
hwMplsLdpSessionTcpConnectionState
This object indicates the TCP link status of the session.
OctetString .1.3.6.1.4.1.2011.5.25.143.1.8.1.3
hwMplsLdpSessionState
This object indicates the current status of the session.
OctetString .1.3.6.1.4.1.2011.5.25.143.1.8.1.4
hwMplsLdpSessionRole
This object indicates the session roles.
OctetString .1.3.6.1.4.1.2011.5.25.143.1.8.1.5
hwMplsLdpSessionFtFlag
This object indicates whether the FT of the session is enabled.
OctetString .1.3.6.1.4.1.2011.5.25.143.1.8.1.6
hwMplsLdpSessionMd5Flag
This object indicates whether the MD5 is enabled for the peer.
OctetString .1.3.6.1.4.1.2011.5.25.143.1.8.1.7
hwMplsLdpSessionReconnectTimer
This object indicates the value of the GR reconnection timer after the negotiation.
Unit: seconds
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.143.1.8.1.8
hwMplsLdpSessionRecoveryTimer
This object indicates the value of the GR recovery timer after the negotiation.
Unit: seconds
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.143.1.8.1.9
hwMplsLdpSessionKeepAliveTimer
This object indicates the value of the KeepAlive timer after the negotiation.
Unit: seconds
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.143.1.8.1.10
hwMplsLdpSessionKeepAliveMsgReceived
This object indicates the number of the KeepAlive messages that the session obtains.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.143.1.8.1.11
hwMplsLdpSessionKeepAliveMsgSent
This object indicates the number of the KeepAlive messages that the session sends.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.143.1.8.1.12
hwMplsLdpSessionLabelAdvMode
This object indicates the label distribution mode of the session.
OctetString .1.3.6.1.4.1.2011.5.25.143.1.8.1.13
hwMplsLdpSessionLocalLabelResourceStatus
This object indicates the status of the local label resources of the session.
OctetString .1.3.6.1.4.1.2011.5.25.143.1.8.1.14
hwMplsLdpSessionPeerLabelResourceStatus
This object indicates the status of the label resources of the LDP peer.
OctetString .1.3.6.1.4.1.2011.5.25.143.1.8.1.15
hwMplsLdpSessionAgeStatus
This object indicates the existence time of the session.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.143.1.8.1.16

hwLdpVpnTable

table
.1.3.6.1.4.1.2011.5.25.143.1.50 · 1 row entry · 9 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwLdpVpnTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MPLSLDP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MPLSLDP-MIB::hwLdpVpnTable' 
This object is used to configure or delete the LDP multi-instance.
Make sure the relevant VPN instance is already created.
hwLdpVpnEntry row .1.3.6.1.4.1.2011.5.25.143.1.50.1
This object is used to configure or delete the LDP multi-instance.
The index of this entry is hwLdpVpnInstanceId.
Make sure the relevant VPN instance is already created.
Indexes
Column Syntax OID
hwLdpVpnInstanceId
This object indicates the ID of the VPN instance.
You can find the correct VPN instance ID based on hwL3vpnVrfIndex of hwL3vpnStatisticsTable.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.143.1.50.1.1
hwLdpVpnLsrId
This object indicates the way to configure the LDP LSR ID.
If the value of the LDP LSR ID is the same as the value of the MPLS LSR ID, the LDP LSR ID is deleted.
It is recommended not to change the LDP LSR ID unless n…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.143.1.50.1.11
hwLdpVpnSplitHorizonAll
This object indicates the way to set the flag of split horizon for all LDP VPN peers.
Default: disabled
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.143.1.50.1.12
hwLdpVpnReset
This object indicates the reset of the LDP multi-instance corresponding to the VPN.
Options:
1.reset(1) -indicates that the LDP multi-instance will be reset.
2.ready(2) -indicates that it is ready to reset ldp multi-ins…
Enumerationr/w
Enumerated Values:
1reset
2ready
 .1.3.6.1.4.1.2011.5.25.143.1.50.1.13
hwMplsVpnFrrLspTrigger
This object indicates the way to configure the LDP policy of vpn instance for LDP Auto FRR.
If the object is set as ipprefix, the value of hwMplsVpnFrrLspTriggerIpPrefix must be set together.
Options:
1. all(1) -in…
Enumerationr/w
Enumerated Values:
1all
2none
3host
4ipPrefix
 .1.3.6.1.4.1.2011.5.25.143.1.50.1.14
hwMplsVpnFrrLspTriggerIpPrefix
This object indicates the IP prefix when configuring the LDP policy of vpn instance for LDP Auto FRR.
The object has a valid length ranging from 1 to 169 characters.
If the object is set with a value, the value of hwM…
OctetStringr/w .1.3.6.1.4.1.2011.5.25.143.1.50.1.15
hwLdpVpnGracefulDeleteCapability
This object indicates whether the LDP graceful-delete capability is enabled for a VPN instance.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.143.1.50.1.16
hwLdpVpnGracefulDeleteTimer
The value of this object identifies the value of a graceful-delete timer for a VPN instance.
When the status of hwLdpVpnGracefulDeleteCapability is enabled, the default value returned by the object is valid.
Default: 5…
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.5.25.143.1.50.1.17
hwLdpVpnRowStatus
This object indicates whether one entry of hwLdpVpnTable is created or destroyed.
The value of this object can be CreatAndGo or Destroy.
When the value of the object is set as CreatAndGo, and the entry is correctly cr…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.143.1.50.1.51

hwLdpRemoteEntityTable

table
.1.3.6.1.4.1.2011.5.25.143.1.51 · 1 row entry · 13 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwLdpRemoteEntityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MPLSLDP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MPLSLDP-MIB::hwLdpRemoteEntityTable' 
This object is used to configure or delete the LDP remote peer.
hwLdpRemoteEntityEntry row .1.3.6.1.4.1.2011.5.25.143.1.51.1
This object is used to configure or delete the LDP remote peer.
The index of this entry is hwLdpRemoteName.
Indexes
Column Syntax OID
hwLdpRemoteName
This object indicates the name of the LDP remote peer.
Range: 1-32 characters
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.5.25.143.1.51.1.1
hwLdpRemoteIp
This object indicates the configuration of the remote peer LSR ID.
If being set, the ID cannot be modified.
To modify the ID, delete the original ID and create a new one.
If the ID is set as 0.0.0.0, it indicates tha…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.143.1.51.1.11
hwLdpRemotePwe3
This object indicates the configuration or deletion of the policy for the remote LDP session.
When the object is enabled, it is forbidden to send the mapping message to the remote peer.
Default: disabled
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.143.1.51.1.12
hwLdpRemoteKeepaliveTimer
This object indicates the value of LDP Keepalive timer.
Default: 45
Unit: seconds
Integer32r/w
Constraints:
range: 30-65535
 .1.3.6.1.4.1.2011.5.25.143.1.51.1.13
hwLdpRemoteHelloTimer
This object indicates the value of LDP Hello hold timer.
Default: 45
Unit: seconds
Integer32r/w
Constraints:
range: 3-65535
 .1.3.6.1.4.1.2011.5.25.143.1.51.1.14
hwLdpRemoteKeepaliveSendTimer
This object indicates the value of LDP Keepalive send timer.
By default, the value of the timer is 0, configuration does not take effect.
Default: 0
Unit: seconds
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.5.25.143.1.51.1.15
hwLdpRemoteHelloSendTimer
This object indicates the value of LDP Hello send timer.
By default, the value of the timer is 0, configuration does not take effect.
Default: 0
Unit: seconds
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.5.25.143.1.51.1.16
hwLdpRemoteIgpSyncTimer
This object indicates the value of IGP-Sync timer.
Default: 10
Unit: seconds
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.5.25.143.1.51.1.17
hwLdpRemoteIpAutoDoDRequest
This object identifies whether the remote peer is enabled with the capability of automatically sending a DoD request.
Default: disabled
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.143.1.51.1.18
hwLdpRemoteIpAutoDoDRequestBlock
This object indicates whether the remote ip auto dod request function blocked.
Default: disabled
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.143.1.51.1.19
hwLdpRemoteLabelAdvertisementMode
This object indicates the label distribution mode.
Options:
1. dod(1) -indicates that the label distribution mode is dod.
2. du(2) -indicates that the label distribution mode is du.
Default: du
Enumerationr/w
Enumerated Values:
1dod
2du
 .1.3.6.1.4.1.2011.5.25.143.1.51.1.20
hwLdpRemoteLocalLsrIdIfIndex
This object indicates the way to specify the interface that the local LDP LSR-ID based on remote entity is assigned to.
Value: 0..2147483647
The default value of the object is the interface that the global LDP LSR ID…
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.2011.5.25.143.1.51.1.21
hwLdpRemoteRowStatus
This object indicates whether one entry of hwLdpRemoteEntityTable is created or destroyed.
The value of this object can be CreatAndGo or Destroy.
When the value of the object is set as CreatAndGo, and the entry is cor…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.143.1.51.1.51

hwLdpPeerTable

table
.1.3.6.1.4.1.2011.5.25.143.1.52 · 1 row entry · 14 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwLdpPeerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MPLSLDP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MPLSLDP-MIB::hwLdpPeerTable' 
This object is used to configure the LDP peer.
hwLdpPeerEntry row .1.3.6.1.4.1.2011.5.25.143.1.52.1
An entry of the peer feature table, used to configure and display features,
such as the MD5 password and split horizon policy negotiated with the local peer.
The index of this entry is hwLdpPeerLsrId.
Indexes
Column Syntax OID
hwLdpPeerLsrId
This object indicates the LSR ID of the LDP peer.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.143.1.52.1.1
hwLdpPeerMd5Type
This object indicates the Md5 type. MD5 is an insecure algorithm and is not recommended.
Options:
1. cipher(1) -indicates that the MD5 password is in cipher text mode.
2. plain(2) -indicates that the MD5 password is in…
Enumerationr/w
Enumerated Values:
1cipher
2plain
3null
 .1.3.6.1.4.1.2011.5.25.143.1.52.1.11
hwLdpPeerMd5Password
This object indicates the MD5 password of LDP neighbor.
To delete the password, set the password length as zero.
When read, it always returns an Octet string with the length of zero.
OctetStringr/w .1.3.6.1.4.1.2011.5.25.143.1.52.1.12
hwLdpPeerGtsmHops
This object indicates the number of GTSM hops.
The valid number of GTSM hops ranges from 1 to 255.
To clear the configuration of GTSM hops, set the number of GTSM hops as 0.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.5.25.143.1.52.1.13
hwLdpPeerSplitHorizon
This object indicates the way to set the flag of split horizon for the specified LDP peer.
Default: disabled
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.143.1.52.1.14
hwLdpPeerReset
This object indicates the reset of the neighbor services.
Options:
1. reset(1) -indicates that the neighbor services will be reset. Only when the object is ready, can this value take effect.
2. ready(2) -indicates that …
Enumerationr/w
Enumerated Values:
1reset
2ready
 .1.3.6.1.4.1.2011.5.25.143.1.52.1.15
hwLdpPeerKeychainName
This object indicates the Keychain name. To cancel the Keychain authentication, set the Keychain name length as 0.
OctetStringr/w .1.3.6.1.4.1.2011.5.25.143.1.52.1.18
hwLdpPeerOutBoundPolicyRange
This object indicates the range of IGP routes for an outbound policy. The default value is clear.
If the object is set as ipprefix, the value of hwLdpPeerOutBoundPolicyFecIpPrefix must be set together.
Options:
1. clea…
Enumerationr/w
Enumerated Values:
1clear
2none
3ipprefix
4host
 .1.3.6.1.4.1.2011.5.25.143.1.52.1.19
hwLdpPeerOutBoundPolicyFecIpPrefix
This object indicates the IP prefix list name of IGP routes for an outbound policy.
If the object is set with a value, the value of hwLdpPeerOutBoundPolicyRange must be set as ipprefix.
OctetStringr/w .1.3.6.1.4.1.2011.5.25.143.1.52.1.20
hwLdpPeerOutBoundPolicyBgpRange
This object indicates the range of BGP routes for an outbound policy. The default value is clear.
If the object is set as ipprefix, the value of hwLdpPeerOutBoundPolicyBgpIpPrefix must be set together.
Options:
1. clea…
Enumerationr/w
Enumerated Values:
1clear
2none
3ipprefix
 .1.3.6.1.4.1.2011.5.25.143.1.52.1.21
hwLdpPeerOutBoundPolicyBgpIpPrefix
This object indicates the IP prefix list name of BGP routes for the outbound policy.
If the object is set with a value, the value of hwLdpPeerOutBoundPolicyBgpRange must be set as ipprefix.
OctetStringr/w .1.3.6.1.4.1.2011.5.25.143.1.52.1.22
hwLdpPeerInBoundPolicyRange
This object indicates the route range for the inbound policy. The default value is clear.
If the object is set as ipprefix, the value of hwLdpPeerInBoundPolicyFecIpPrefix must be set together.
Options:
1. clear(1) …
Enumerationr/w
Enumerated Values:
1clear
2none
3ipprefix
4host
 .1.3.6.1.4.1.2011.5.25.143.1.52.1.23
hwLdpPeerInBoundPolicyFecIpPrefix
This object indicates the IP prefix list name for the inbound policy.
If the object is set with a value, the value of hwLdpPeerInBoundPolicyRange must be set as ipprefix.
OctetStringr/w .1.3.6.1.4.1.2011.5.25.143.1.52.1.24
hwLdpPeerRowStatus
This object indicates whether one entry of hwLdpPeerTable is created or destroyed.
The value of this object can be CreatAndGo or Destroy.
When the value of the object is set as CreatAndGo, and the entry is correctly c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.143.1.52.1.51

hwLdpVpnPeerTable

table
.1.3.6.1.4.1.2011.5.25.143.1.53 · 1 row entry · 7 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwLdpVpnPeerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MPLSLDP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MPLSLDP-MIB::hwLdpVpnPeerTable' 
This table is used to create and delete peer configurations in the LDP multi-instance.
Make sure the corresponding LDP VPN-instance is already created in hwLdpVpnTable.
hwLdpVpnPeerEntry row .1.3.6.1.4.1.2011.5.25.143.1.53.1
An entry of the VPN peer feature table, used to configure and display features,
such as the MD5 password and split horizon policy negotiated with the local peer on the VPN.
The indexs of this entry are hwLdpVpnInstance…
Indexes
Column Syntax OID
hwLdpVpnPeerLsrId
This object indicates the LSR ID of the LDP peer.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.143.1.53.1.1
hwLdpVpnPeerMd5Type
This object indicates the Md5 type. MD5 is an insecure algorithm and is not recommended.
Options:
1. cipher(1) -indicates that the MD5 password is in cipher text mode.
2. plain(2) -indicates that the MD5 password is in…
Enumerationr/w
Enumerated Values:
1cipher
2plain
3null
 .1.3.6.1.4.1.2011.5.25.143.1.53.1.11
hwLdpVpnPeerMd5Password
This object indicates the MD5 password of VPN LDP neighbor.
To delete the password, set the password length as zero.
When read, it always returns an Octet string with the length of zero.
OctetStringr/w .1.3.6.1.4.1.2011.5.25.143.1.53.1.12
hwLdpVpnPeerSplitHorizon
This object indicates the way to set the flag of split horizon for the specified LDP peer.
Default: disabled
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.143.1.53.1.13
hwLdpVpnPeerReset
This object indicates the reset of the neighbor services.
Options:
1. reset(1) -indicates that the neighbor services will be reset. Only when the object is ready, can this value take effect.
2. ready(2) -indicates that …
Enumerationr/w
Enumerated Values:
1reset
2ready
 .1.3.6.1.4.1.2011.5.25.143.1.53.1.14
hwLdpVpnPeerKeychainName
This object indicates the Keychain name. To cancel the Keychain authentication, set the Keychain name length as 0.
OctetStringr/w .1.3.6.1.4.1.2011.5.25.143.1.53.1.17
hwLdpVpnPeerRowStatus
This object indicates whether one entry of hwLdpVpnPeerTable is created or destroyed.
The value of this object can be CreatAndGo or Destroy.
When the value of the object is set as CreatAndGo, and the entry is correctl…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.143.1.53.1.51

hwLdpInterfaceTable

table
.1.3.6.1.4.1.2011.5.25.143.1.54 · 1 row entry · 11 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwLdpInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MPLSLDP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MPLSLDP-MIB::hwLdpInterfaceTable' 
This table is used to configure or delete the LDP capability on the interface.
hwLdpInterfaceEntry row .1.3.6.1.4.1.2011.5.25.143.1.54.1
An entry of the LDP interface table,
used to configure and display the LDP negotiation parameters on the interface enabled with LDP capabilities.
The index of this entry is hwLdpInterfaceIndex.
Indexes
Column Syntax OID
hwLdpInterfaceIndex
This object indicates the interface index.
You can get the correct interface index based on ifIndex of ifTable.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.143.1.54.1.1
hwLdpStaticFrrProtectTimerobsolete
This object indicates the value of static FRR protect timer.
Default: 10
Unit: seconds
Integer32r/w
Constraints:
range: 5-30
 .1.3.6.1.4.1.2011.5.25.143.1.54.1.11
hwLdpKeepAliveTimer
This object indicates the value of Keepalive timer.
Default: 45
Unit: seconds
Integer32r/w
Constraints:
range: 30-65535
 .1.3.6.1.4.1.2011.5.25.143.1.54.1.12
hwLdpIgpSyncTimer
This object indicates the value of IGP-Sync timer. By default, the timer is set to 10 seconds.
Default: 10
Unit: seconds
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.5.25.143.1.54.1.13
hwLdpHelloTimer
This object indicates the value of Hello hold timer. By default, the value of the timer is 15 seconds.
Default: 15
Unit: seconds
Integer32r/w
Constraints:
range: 3-65535
 .1.3.6.1.4.1.2011.5.25.143.1.54.1.14
hwLdpTransportAddressIfIndex
This object indicates the way to specify the interface that the Transport Address is assigned to.
Value: 0..2147483647
The default value of the object for the public interface is the interface that the LDP LSR ID is as…
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.2011.5.25.143.1.54.1.15
hwLdpKeepAliveSendTimer
This object indicates the value of LDP Keepalive send timer.
Default: 0
Unit: seconds
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.5.25.143.1.54.1.16
hwLdpHelloSendTimer
This object indicates the value of LDP Hello send timer.
Default: 0
Unit: seconds
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.5.25.143.1.54.1.17
hwLdpInterfaceLabelAdvertisementMode
This object indicates the label distribution mode.
Options:
1. dod(1) -indicates that the label distribution mode is dod.
2. du(2) -indicates that the label distribution mode is du.
Default: du
Enumerationr/w
Enumerated Values:
1dod
2du
 .1.3.6.1.4.1.2011.5.25.143.1.54.1.18
hwLdpInterfaceLocalLsrIdIfIndex
This object indicates the way to specify the interface that the local LDP LSR-ID based on interface is assigned to.
Value: 0..2147483647
The default value of the object for the public interface is the interface that …
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.2011.5.25.143.1.54.1.19
hwLdpInterfaceRowStatus
This object indicates whether one entry of hwLdpInterfaceTable is created or destroyed.
The value of this object can be CreatAndGo or Destroy.
When the value of the object is set as CreatAndGo, and the entry is correc…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.143.1.54.1.51

hwLdpPeerGroupTable

table
.1.3.6.1.4.1.2011.5.25.143.1.58 · 1 row entry · 8 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwLdpPeerGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MPLSLDP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MPLSLDP-MIB::hwLdpPeerGroupTable' 
This table is used to configure an LDP peer group.
hwLdpPeerGroupEntry row .1.3.6.1.4.1.2011.5.25.143.1.58.1
An entry of this table.
Indexes
Column Syntax OID
hwLdpPeerGroupName
This object indicates the name of a peer group.
OctetString
Constraints:
range: 1-110
 .1.3.6.1.4.1.2011.5.25.143.1.58.1.1
hwLdpPeerGroupOutBoundRange
This object indicates the range of IGP routes for an outbound policy.
The default value is clear. If the object is set as ipprefix, the value of hwLdpPeerGroupOutBoundFecIpPrefix must be set together.
Options:
1. clear…
Enumerationr/w
Enumerated Values:
1clear
2none
3ipprefix
4host
 .1.3.6.1.4.1.2011.5.25.143.1.58.1.11
hwLdpPeerGroupOutBoundFecIpPrefix
This object indicates the IP prefix list name of IGP routes for an outbound policy.
If the object is set with a value, the value of hwLdpPeerGroupOutBoundRange must be set as ipprefix.
OctetStringr/w .1.3.6.1.4.1.2011.5.25.143.1.58.1.12
hwLdpPeerGroupOutBoundBgpRange
This object indicates the range of BGP routes for an outbound policy. The default value is clear.
If the object is set as ipprefix, the value of hwLdpPeerGroupOutBoundBgpIpPrefix must be set together.
Options:
1. clear…
Enumerationr/w
Enumerated Values:
1clear
2none
3ipprefix
 .1.3.6.1.4.1.2011.5.25.143.1.58.1.13
hwLdpPeerGroupOutBoundBgpIpPrefix
This object indicates the IP prefix list name of BGP routes for an outbound policy.
If the object is set with a value, the value of hwLdpPeerGroupOutBoundBgpRange must be set as ipprefix.
OctetStringr/w .1.3.6.1.4.1.2011.5.25.143.1.58.1.14
hwLdpPeerGroupInBoundRange
This object indicates the route range for an inbound policy. The default value is clear.
If the object is set as ipprefix, the value of hwLdpPeerGroupInBoundIpPrefix must be set together.
Options:
1. clear(1) -Thi…
Enumerationr/w
Enumerated Values:
1clear
2none
3ipprefix
4host
 .1.3.6.1.4.1.2011.5.25.143.1.58.1.15
hwLdpPeerGroupInBoundIpPrefix
This object indicates the IP prefix list name of routes for an inbound policy.
If the object is set with a value, the value of hwLdpPeerGroupInBoundRange must be set as ipprefix.
OctetStringr/w .1.3.6.1.4.1.2011.5.25.143.1.58.1.16
hwLdpPeerGroupRowStatus
This object indicates whether one entry of hwLdpPolicyPeerGroupTable is created or destroyed. The value of this object is CreatAndGo or Destroy. When the value of the object is set to CreatAndGo, and the entry is correc…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.143.1.58.1.51

hwLdpMultiLinkCfgTable

table
.1.3.6.1.4.1.2011.5.25.143.1.74 · 1 row entry · 10 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwLdpMultiLinkCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MPLSLDP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MPLSLDP-MIB::hwLdpMultiLinkCfgTable' 
This object indicates that MPLS LDP multi-link (include local and remote coexist) configurations are inconsistent.
The index of this entry is hwMplsLdpVrfIndex,hwMplsLdpPeerLdpId,hwMplsLdpLocalLdpId,hwMplsLdpConfigIfIndex, hwMplsLdpConfigRemotePeerIP and hwMplsLdpConfigType.
hwLdpMultiLinkCfgEntry row .1.3.6.1.4.1.2011.5.25.143.1.74.1
This object indicates that MPLS LDP multi-link (include local and remote coexist) configurations are inconsistent.
The index of this entry is hwMplsLdpVrfIndex,hwMplsLdpPeerLdpId,hwMplsLdpLocalLdpId,hwMplsLdpConfigIfInd…
Indexes
Column Syntax OID
hwMplsLdpVrfIndex
This object indicates the vrfIndex.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.143.1.74.1.1
hwMplsLdpPeerLdpId
This object indicates the peer LDP ID.
MPLS-TC-STD-MIBMplsLdpIdentifier
Type Constraints:
range: 6
 .1.3.6.1.4.1.2011.5.25.143.1.74.1.2
hwMplsLdpLocalLdpId
This object indicates the local LDP ID.
MPLS-TC-STD-MIBMplsLdpIdentifier
Type Constraints:
range: 6
 .1.3.6.1.4.1.2011.5.25.143.1.74.1.3
hwMplsLdpConfigIfIndex
This object indicates the inconsistent interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.143.1.74.1.4
hwMplsLdpConfigRemotePeerIP
This object indicates the rempte ip.
Range: 1-32 characters
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.5.25.143.1.74.1.5
hwMplsLdpConfigType
This object indicates the inconsistent configuration type.
OctetString .1.3.6.1.4.1.2011.5.25.143.1.74.1.6
hwMplsLdpConsistentState
This object indicates the the state is inconsistent or consistent.
Enumeration
Enumerated Values:
1consistent
2inconsistent
 .1.3.6.1.4.1.2011.5.25.143.1.74.1.7
hwMplsLdpEffectKeepAlive
This object indicates the value of effect keepalive time.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.143.1.74.1.8
hwMplsLdpEffectTransportAddr
This object indicates the value of effect transport address.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.5.25.143.1.74.1.9
hwMplsLdpEffectLabelAdvertisementMode
This object indicates the value of effect label advertisement mode.
OctetString .1.3.6.1.4.1.2011.5.25.143.1.74.1.10

hwLdpPeerAddressTable

table
.1.3.6.1.4.1.2011.5.25.143.1.75 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwLdpPeerAddressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MPLSLDP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MPLSLDP-MIB::hwLdpPeerAddressTable' 
This object indicates that peer address count has exceeded the total count.
The index of this entry is hwLdpPeerAddressLsrId and hwLdpPeerVrfIndex.
hwLdpPeerAddressEntry row .1.3.6.1.4.1.2011.5.25.143.1.75.1
This object indicates that peer address count has exceeded the total count.
The index of this entry is hwLdpPeerAddressLsrId and hwLdpPeerVrfIndex.
Indexes
Column Syntax OID
hwLdpPeerAddressLsrId
This object indicates peer LSR ID.
MPLS-TC-STD-MIBMplsLdpIdentifier
Type Constraints:
range: 6
 .1.3.6.1.4.1.2011.5.25.143.1.75.1.1
hwLdpPeerVrfIndex
This object indicates the vrfIndex.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.143.1.75.1.2
hwLdpAddressTotalCount
The value of this object identifies the maximum number of peer address.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.143.1.75.1.3

hwLdpMappingTable

table
.1.3.6.1.4.1.2011.5.25.143.1.76 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwLdpMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MPLSLDP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MPLSLDP-MIB::hwLdpMappingTable' 
This object indicates that mapping count has exceeded the total count.
The index of this entry is hwLdpMappingType and hwLdpVrfIndex.
hwLdpMappingEntry row .1.3.6.1.4.1.2011.5.25.143.1.76.1
This object indicates that mapping count has exceeded the total count.
The index of this entry is hwLdpMappingType and hwLdpVrfIndex.
Indexes
Column Syntax OID
hwLdpMappingType
sent -Indicates that the sent mapping.
received -Indicates that the received mapping.
OctetString .1.3.6.1.4.1.2011.5.25.143.1.76.1.1
hwLdpVrfIndex
This object indicates the vrfIndex.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.143.1.76.1.2
hwLdpMappingTotalCount
The value of this object identifies the maximum number of mapping count.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.143.1.76.1.3

hwLdpLastLocalAdjDownTable

table
.1.3.6.1.4.1.2011.5.25.143.1.77 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwLdpLastLocalAdjDownTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MPLSLDP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MPLSLDP-MIB::hwLdpLastLocalAdjDownTable' 
This object indicates that the last local adjacency in the local-and-remote LDP session went Down due to hello timeout.
The index of this entry is hwLdpVrfName, hwLdpAdjPeerLsrId.
hwLdpLastLocalAdjDownEntry row .1.3.6.1.4.1.2011.5.25.143.1.77.1
This object indicates that the last local adjacency in the local-and-remote LDP session went Down due to hello timeout.
The index of this entry is hwLdpVrfName, hwLdpAdjPeerLsrId.
Indexes
Column Syntax OID
hwLdpVrfName
This object indicates the VRF name.
OctetString .1.3.6.1.4.1.2011.5.25.143.1.77.1.1
hwLdpAdjPeerLsrId
This object indicates the LSR ID of the LDP peer.
MPLS-TC-STD-MIBMplsLdpIdentifier
Type Constraints:
range: 6
 .1.3.6.1.4.1.2011.5.25.143.1.77.1.2
hwLdpInterfaceName
This object indicates the interface name.
OctetString .1.3.6.1.4.1.2011.5.25.143.1.77.1.3