hwY1731LckExceedThreshold
HUAWEI-ETHOAM-MIB ·
.1.3.6.1.4.1.2011.5.25.136.1.6.54
Object
notification
Indicates that the number of LCK packets transmitted in 1 second exceeds the upper limit.
Context
- MIB
- HUAWEI-ETHOAM-MIB
- OID
.1.3.6.1.4.1.2011.5.25.136.1.6.54- Type
- notification
- Status
- current
- Parent
- hwEthOamTraps
- Siblings
- 43
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwDot1agCfmFaultAlarm A MEP has lost contact with one or more MEPs. A notification
(fault alarm) is sent to the management entity with the OID
of the MEP that has detected the fault.
Wheneve… | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.1 |
| hwDot3ahEfmNonThresholdRecovery This object indicates that the non-threshold-crossing event is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.17 |
| hwTestMessageFailed obsolete The events after tests are reported.
1,2,3,4, and 5 indicate has not run/is running/the previous test terminates normally/the previous test terminate abnormally/the previous test … | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.2 |
| hwCfmVlanOnewayDelay This object indicates that the one-way delay exceeds the trap threshold in the VLAN networking. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.23 |
| hwCfmVlanOnewayDelayRecovery This object indicates that the one-way delay falls below the trap threshold in the VLAN networking. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.24 |
| hwCfmVlanTwowayDelay This object indicates that the two-way delay exceeds the trap threshold in the VLAN networking. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.25 |
| hwCfmVlanTwowayDelayRecovery This object indicates that the two-way delay falls below the trap threshold in the VLAN networking. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.26 |
| hwDot3ahEfmLoopbackFailed This object indicates that an hwDot3ahEfmLoopbackFailed notification is sent when loopback fails to start on an interface. This notification should not be sent more than once per … | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.29 |
| hwTestMessageCompleted obsolete After the test is complete, report the results to the network management. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.3 |
| hwY1731AisDefectAlarm This object indicates that the MEP receives an AIS PDU and enters the faulty state. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.30 |
| hwY1731AisDefectAlarmRecovery This object indicates that the MEP does not receive an AIS PDU within the AIS PDU timeout period and exits the faulty state. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.31 |
| hwDot1agCfmUnexpectedMEGLevel This object indicates that the MEP receives a CCM with an unexpected MEG level. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.32 |
| hwDot1agCfmUnexpectedMEGLevelCleared This object indicates that the MEP does not receive a CCM with an unexpected MEG level within the CCM timeout period. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.33 |
| hwDot1agCfmMismerge This object indicates that the MEP receives a CCM carrying the correct MEG level but the incorrect MEG ID. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.34 |
| hwDot1agCfmMismergeCleared This object indicates that the MEP does not receive a CCM with an unexpected MEG ID within the CCM timeout period. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.35 |
| hwDot1agCfmUnexpectedMEP This object indicates that the MEP receives a CCM that has the correct MEG level, correct MEG ID, and unexpected MEP ID. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.36 |
| hwDot1agCfmUnexpectedMEPCleared This object indicates that the MEP does not receive a CCM with an unexpected MEP ID within the CCM timeout period. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.37 |
| hwDot1agCfmUnexpectedPeriod This object indicates that the MEP receives a CCM that has the correct MEG level, correct MEG ID, correct MEP ID, and unexpected period. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.38 |
| hwDot1agCfmUnexpectedPeriodCleared This object indicates that the MEP does not receive a CCM with an unexpected period within the CCM timeout period. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.39 |
| hwDot3ahEfmThresholdEvent This object indicates that an hwDot3ahEfmThresholdEvent notification is sent when a local or remote threshold-crossing event is detected. A local threshold-crossing event is detec… | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.4 |
| hwDot1agCfmUnexpectedMAC This object indicates that the MEP receives a CCM with an unexpected MAC address. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.40 |
| hwDot1agCfmUnexpectedMACCleared This object indicates that the MEP does not receive a CCM with an unexpected MAC address within the CCM timeout period. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.41 |
| hwDot1agCfmLOC This object indicates that the MEP does not receive any CCM from the RMEP within the CCM timeout period. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.42 |
| hwDot1agCfmLOCCleared This object indicates that the MEP receives n (n is greater than or equal to 3) CCMs from the RMEP (MEP ID = i) within the CCM timeout period. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.43 |
| hwDot1agCfmExceptionalMACStatus This object indicates that the remote MEP is reporting an error status in its Port Status TLV or Interface Status TLV. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.44 |
| hwDot1agCfmExceptionalMACStatusCleared This object indicates that the remote MEP resumes from an error status indicated in its Port Status TLV or Interface Status TLV. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.45 |
| hwDot1agCfmRDI This object indicates that the MEP receives a CCM with the RDI field set. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.46 |
| hwDot1agCfmRDICleared This object indicates that the MEP receives a CCM with the RDI field cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.47 |
| hwY1731AisExceedMaxPktNum This object indicates that the number of packets sent or received in 1s exceeds the maximum value. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.48 |
| hwY1731AisExceedMaxPktNumCleared This object indicates that the number of packets sent or received in 1s falls below the maximum value. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.49 |
| hwDot3ahEfmNonThresholdEvent This object indicates that an hwDot3ahEfmNonThresholdEvent notification is sent when a local or remote non-threshold-crossing event is detected. A local event is detected by the l… | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.5 |
| hwY1731LckDefect This object indicates that the MEP enters the LCK faulty state. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.50 |
| hwY1731LckDefectCleared This object indicates that the MEP exits from the LCK faulty state. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.51 |
| hwY1731Statistic This object indicates that the Y.1731 statistic value exceeds the upper threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.52 |
| hwY1731StatisticClear This object indicates that the Y.1731 statistic value falls below the lower threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.53 |
| hwY1731LckExceedThresholdRecovery Indicates that the number of LCK packets transmitted in 1 second falls below the lower limit. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.55 |
| hwY1731TunnelNonSupport This object indicates that Y.1731 does not support the current public tunnel. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.56 |
| hwY1731TunnelNonSupportResumed This object indicates that the alarm that Y.1731 does not support the current public tunnel is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.57 |
| hwY1731TestIdStatistic The Y.1731 statistic value exceeded the upper limit value of the threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.58 |
| hwY1731TestIdStatisticClear The Y.1731 statistic value fell below lower limit value of the threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.59 |
| hwY1731PwTrunkNonSupport This object indicates that Y.1731 PW-side frame loss measurement is not supported on an Eth-Trunk interface configured as the PW's public network-side interface. | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.60 |
| hwY1731PwTrunkNonSupportResumed This object indicates that The alarm that Y.1731 PW-side frame loss measurement is not supported on an Eth-Trunk interface configured as the PW's public network-side interface is … | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.61 |
| hwDot3ahEfmRemoteDyingGaspEvent This object indicates that an hwDot3ahEfmRemoteDyingGaspEvent notification is sent when a remote Dying-Gasp event is detected. A remote event is detected through the reception of … | notification | - | .1.3.6.1.4.1.2011.5.25.136.1.6.8 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwY1731LckMaxPktNum The max LCK packets transmitted or received in 1 second. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.136.1.8.5.2 |
| hwY1731LckCurrentPktNum The current LCK packets transmitting or receiving. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.136.1.8.5.3 |
| hwY1731LckUpperThreshold The object is used to set the upper threshold value of LCK packets.
The value range is from 1 to 100.
The default means 80. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.136.1.8.5.4 |
| hwY1731LckLowerThreshold The object is used to set the lower threshold value of LCK packets.
The value range is from 1 to 100.
The default means 70. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.136.1.8.5.5 |