hwIpTrafficInnerPriority

Indicates the inner priority of the IP traffic profile. 
The higher 16 bits indicate the inner priority mapping policy and the lower 16 bits indicate the inner priority. 
The inner priority storage mode of the IP traffic profile is shown as follows:
                        
         -------------------------------------------------------- 
         |           31-16                |         15-0         |   
         -------------------------------------------------------- 
         |  Inner priority mapping policy |  Inner priority      |
         --------------------------------------------------------
Here,
Inner priority mapping policy: 
0xFF (specified priority), 0xFE (priority mapped from the outer CoS field on the ingress), 
0xFD (priority copied from the ToS field), 0xFC (priority mapped from the inner CoS field on the ingress), 
0xFB (priority mapped from the packet DSCP field on the ingress) and 0xFA (do not edit).
Inner priority: Range: 0-7.
Inner priority here indicates the specified priority when the priority copy policy is to specify a priority. 
Inner priority here indicates the default priority when the priority copy policy is to copy the priority.
Inner priority is invalid when the priority copy policy is 0xFA (do not edit). Therefore, you must enter 0xff.            
For example, if the inner priority copy policy is 0xFE and the default priority is 4, 
the value of hwIpTrafficInnerPriority is 0xFE0004, that is, 16646148.

MIB

HUAWEI-ETHERLIKE-EXT-MIB

OID

.1.3.6.1.4.1.2011.5.14.3.8.1.11

Type

column

Access

readwrite

Status

current

Parent

hwIpTrafficParamEntry