hwPortOperStatus
HUAWEI-DEVICE-MIB ·
.1.3.6.1.4.1.2011.6.3.3.4.1.5
Object
column
Enumeration
Port operation status. Options: 1.normal(1) -indicates that the link is up or activated 2.fault(2) -indicates that port failure 3.localLoopback(3) -indicates that normal local loopback 4.forbidden(4) -indicates that the port is disabled 5.test(5) -indicates test start 6.remoteLoopback(6) -indicates normal remote loopback 7.activated(10) -indicates that the port is being activated 8.deactivated(11) -indicates that the link is down or deactivated 9.block(12) -indicates port blocking 10.nolight(13) -indicates no signal in ATM port 11.innerLocalLoopback(14) -indicates that inner local loopback toward inner system chipset (it's UTOPIA loopback for ADSL port) 12.innerRemoteLoopback(15)-indicates that inner remote loopback toward inner system chipset 13.locked(16) -indicates locked 14.busy(17) -indicates busy 15.maintain(18) -indicates maintenance 16.standbynormal(19) -indicates that the port on the standby control board is activated 17.standbyfault(20) -indicates that the port on the standby control board is faulty 18.adslloopbackafe(21) -indicates that AFE loopback 19.adslloopbackhybrid(22) -indicates that HYBRID loopback 20.rtuLocalLoopback(23) -indicates that RTU local loopback 21.rtuRemoteLoopback(24) -indicates that RTU remote loopback 22.linkup(25) -indicates eth port online 23.linkdown(26) -indicates eth port offline 24.powerDenied(50) -indicates port operation state is power denied
Context
- MIB
- HUAWEI-DEVICE-MIB
- OID
.1.3.6.1.4.1.2011.6.3.3.4.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwPortEntry
- Table
- hwPortTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwPortIndex Port index, indicating the physical number of the port on a board. | column | Integer32 | .1.3.6.1.4.1.2011.6.3.3.4.1.1 |
| hwPortSecondaryStatus The secondary status of the port.
This BITS structure can report the following status:
1. sstAins(0) -this bit position positively reports that the status of the port is automati… | column | Bits | .1.3.6.1.4.1.2011.6.3.3.4.1.10 |
| hwPortVsIDMask The virtual system mask of the port, each bit indicates the VAN to which the board
belongs. For example, the first bit maps vs0, the second bit maps vs1, and the rest
can be dedu… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.3.3.4.1.11 |
| hwPortType Port type, which is defined in HUAWEI-TC-MIB.mib. | column | HUAWEI-TC-MIBHWPortType | .1.3.6.1.4.1.2011.6.3.3.4.1.2 |
| hwPortDesc The description about the port, used to describe extra information of the port.
For example, you can describe the user that connects to the port.
The standby control board does no… | column | OctetString | .1.3.6.1.4.1.2011.6.3.3.4.1.3 |
| hwPortSpeed deprecated The speed of the port.
Unit:Kbps | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.3.3.4.1.4 |
| hwPortAdminStatus Port administration status.
Options:
1.active(1) -activate the port
2.deactive(2) -deactivate the port
3.block(3) -block the p… | column | Enumeration | .1.3.6.1.4.1.2011.6.3.3.4.1.6 |
| hwPortNetworkRole Indicates the network role of a board.
Options:
1. uplink(1) -indicates the uplink port
2. cascade(2) -indicates the subtending port
3. access(3) -indicates the downstream acces… | column | Enumeration | .1.3.6.1.4.1.2011.6.3.3.4.1.7 |
| hwPortTemperature The temperature of the port.
The object is not used. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.3.3.4.1.8 |
| hwPortPrimaryStatus The primary status of the port.
Options:
1. isNr(1) -in Service, normal
2. isAnr(2) -in service, abnormal
3. isRst(3) -in service, restricted
4. isAnrst(4) -in service,… | column | Enumeration | .1.3.6.1.4.1.2011.6.3.3.4.1.9 |