hwAtmLoopback
HUAWEI-ATM-MIB ·
.1.3.6.1.4.1.2011.5.25.156.1.1.1.15
Object
column
r/w
Enumeration
Enable the loopback function of the channel. local: enables the local loopback on the interface. remote: enables the remote loopback on the interface. payload: enables the remote payload loopback on the interface. By default, all loopback functions are disabled.
Context
- MIB
- HUAWEI-ATM-MIB
- OID
.1.3.6.1.4.1.2011.5.25.156.1.1.1.15- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwAtmEntry
- Table
- hwAtmTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | local |
2 | remote |
3 | payload |
255 | none |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwAtmIfIndex Indicates the interface index. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2011.5.25.156.1.1.1.1 |
| hwAtmIfType Indicates the interface type. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.156.1.1.1.11 |
| hwAtmClock Master clock: uses the internal clock signal.
Slave clock: uses the line clock signal. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.156.1.1.1.12 |
| hwAtmFrameFormat For the optical interface STM-1/STM-4, the frame format on the ATM interface
is SDH; for the OC-3/OC-12 interface, the frame format is SONET.
The default frame format is SDH. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.156.1.1.1.13 |
| hwAtmScramble By default, the scramble function is enabled. The scramble function
takes effect only on payload rather than cell header.
true: enables the scramble function. false: disables the … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.156.1.1.1.14 |
| hwAtmPitp Enable or disable the function of PITP. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.156.1.1.1.16 |
| hwAtmFlagJ0Mode Indicates the overhead byte of the SDH frame. j0: sets section trace byte.
The default value is j016ByteMode(2);hwAtmFlagJ0Trace:NetEngine. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.156.1.1.1.17 |
| hwAtmFlagJ0Value Indicates the value of j01ByteMode. When hwAtmFlagJ0Mode is set to j01ByteMode, hwAtmFlagJ0Value takes effect. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.156.1.1.1.18 |
| hwAtmFlagJ0Trace Set section trace byte.
When hwAtmFlagJ0Mode is set to j016ByteMode or j064ByteOrNullMode, this variable takes effect.
When hwAtmFlagJ0Mode is set to j016ByteMode, the value of th… | column | OctetString | .1.3.6.1.4.1.2011.5.25.156.1.1.1.19 |
| hwAtmFlagJ1Mode Indicates the overhead byte of the SDH frame. j1: sets path trace byte.
The default value is j116ByteMode(2);hwAtmFlagJ1Trace:NetEngine. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.156.1.1.1.20 |
| hwAtmFlagJ1Value Indicates the value of j11ByteMode. When hwAtmFlagJ1Mode is set to j11ByteMode, hwAtmFlagJ1Value takes effect. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.156.1.1.1.21 |
| hwAtmFlagJ1Trace Set path trace byte.
When hwAtmFlagJ1Mode is set to j116ByteMode or j164ByteOrNullMode, this variable takes effect.
When hwAtmFlagJ1Mode is set to j116ByteMode, this variable is u… | column | OctetString | .1.3.6.1.4.1.2011.5.25.156.1.1.1.22 |
| hwAtmFlagC2Value Indicates the overhead byte of the SDH frame.
c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF.
The default value is 0x02. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.156.1.1.1.23 |