HUAWEI-ATM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
26
Rows
26
Columns
163

hwAtmTable

table
.1.3.6.1.4.1.2011.5.25.156.1.1 · 1 row entry · 14 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ATM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ATM-MIB::hwAtmTable' 
This table is used to configure the parameters of the ATM interface.
hwAtmEntry row .1.3.6.1.4.1.2011.5.25.156.1.1.1
This table is used to configure the parameters of the ATM interface.
Indexes
Column Syntax OID
hwAtmIfIndex
Indicates the interface index.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.156.1.1.1.1
hwAtmIfType
Indicates the interface type.
Enumeration
Enumerated Values:
1oc3OrStm1
2oc12OrStm4
 .1.3.6.1.4.1.2011.5.25.156.1.1.1.11
hwAtmClock
Master clock: uses the internal clock signal.
Slave clock: uses the line clock signal.
Enumerationr/w
Enumerated Values:
1master
2slave
 .1.3.6.1.4.1.2011.5.25.156.1.1.1.12
hwAtmFrameFormat
For the optical interface STM-1/STM-4, the frame format on the ATM interface
is SDH; for the OC-3/OC-12 interface, the frame format is SONET.
The default frame format is SDH.
Enumerationr/w
Enumerated Values:
1sdh
2sonet
 .1.3.6.1.4.1.2011.5.25.156.1.1.1.13
hwAtmScramble
By default, the scramble function is enabled. The scramble function
takes effect only on payload rather than cell header.
true: enables the scramble function. false: disables the scramble function.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.156.1.1.1.14
hwAtmLoopback
Enable the loopback function of the channel.
local: enables the local loopback on the interface.
remote: enables the remote loopback on the interface.
payload: enables the remote payload loopback on the interface.
By de…
Enumerationr/w
Enumerated Values:
1local
2remote
3payload
255none
 .1.3.6.1.4.1.2011.5.25.156.1.1.1.15
hwAtmPitp
Enable or disable the function of PITP.
Enumerationr/w
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.2011.5.25.156.1.1.1.16
hwAtmFlagJ0Mode
Indicates the overhead byte of the SDH frame. j0: sets section trace byte.
The default value is j016ByteMode(2);hwAtmFlagJ0Trace:NetEngine.
Enumerationr/w
Enumerated Values:
1j01ByteMode
2j016ByteMode
3j064ByteOrNullMode
4peer
 .1.3.6.1.4.1.2011.5.25.156.1.1.1.17
hwAtmFlagJ0Value
Indicates the value of j01ByteMode. When hwAtmFlagJ0Mode is set to j01ByteMode, hwAtmFlagJ0Value takes effect.
Integer32r/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.2011.5.25.156.1.1.1.18
hwAtmFlagJ0Trace
Set section trace byte.
When hwAtmFlagJ0Mode is set to j016ByteMode or j064ByteOrNullMode, this variable takes effect.
When hwAtmFlagJ0Mode is set to j016ByteMode, the value of this variable is up to 15 characters trace…
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.5.25.156.1.1.1.19
hwAtmFlagJ1Mode
Indicates the overhead byte of the SDH frame. j1: sets path trace byte.
The default value is j116ByteMode(2);hwAtmFlagJ1Trace:NetEngine.
Enumerationr/w
Enumerated Values:
1j11ByteMode
2j116ByteMode
3j164ByteOrNullMode
4peer
 .1.3.6.1.4.1.2011.5.25.156.1.1.1.20
hwAtmFlagJ1Value
Indicates the value of j11ByteMode. When hwAtmFlagJ1Mode is set to j11ByteMode, hwAtmFlagJ1Value takes effect.
Integer32r/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.2011.5.25.156.1.1.1.21
hwAtmFlagJ1Trace
Set path trace byte.
When hwAtmFlagJ1Mode is set to j116ByteMode or j164ByteOrNullMode, this variable takes effect.
When hwAtmFlagJ1Mode is set to j116ByteMode, this variable is up to 15 characters trace byte.
When hwAt…
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.5.25.156.1.1.1.22
hwAtmFlagC2Value
Indicates the overhead byte of the SDH frame.
c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF.
The default value is 0x02.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.5.25.156.1.1.1.23

hwAtmMapPvpTable

table
.1.3.6.1.4.1.2011.5.25.156.1.2 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmMapPvpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ATM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ATM-MIB::hwAtmMapPvpTable' 
This table is used to configure the mapping between the peer VPI and the local
          
VPI.
hwAtmMapPvpEntry row .1.3.6.1.4.1.2011.5.25.156.1.2.1
This table is used to configure the mapping between the peer VPI and the local

VPI.
Indexes
Column Syntax OID
hwAtmMapPvpIfIndex
Indicates the interface index.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.156.1.2.1.1
hwAtmMapPvpVplVpi
Indicates the local VPI value. The value is an integer.
For UNI interface, VPI value ranging from 0 to 255;
For NNI interface, VPI value ranging from 0 to 4095.
ATM-TC-MIBAtmVpIdentifier
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2011.5.25.156.1.2.1.2
hwAtmMapPvpRemoteVplVpi
Indicates the peer VPI value. The value is an integer.
For UNI interface, VPI value ranging from 0 to 255;
For NNI interface, VPI value ranging from 0 to 4095.
ATM-TC-MIBAtmVpIdentifierr/w
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2011.5.25.156.1.2.1.11
hwAtmMapPvpBi
Description.
Enumerationr/w
Enumerated Values:
0downdirectional
1bidirectional
 .1.3.6.1.4.1.2011.5.25.156.1.2.1.12
hwAtmMapPvpRowStatus
This variable is used to create or delete an object.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.156.1.2.1.51

hwAtmMapPvcTable

table
.1.3.6.1.4.1.2011.5.25.156.1.3 · 1 row entry · 7 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmMapPvcTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ATM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ATM-MIB::hwAtmMapPvcTable' 
This table is used to configure the mapping between the peer VPI/VCI
and the local VPI/VCI.
hwAtmMapPvcEntry row .1.3.6.1.4.1.2011.5.25.156.1.3.1
This table is used to configure the mapping between the peer VPI/VCI
and the local VPI/VCI.
Indexes
Column Syntax OID
hwAtmMapPvcIfIndex
Indicates the interface index.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.156.1.3.1.1
hwAtmMapPvcVclVpi
Indicates the local VPI value. The value is an integer.
For UNI interface, VPI value ranging from 0 to 255;
For NNI interface, VPI value ranging from 0 to 4095.
ATM-TC-MIBAtmVpIdentifier
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2011.5.25.156.1.3.1.2
hwAtmMapPvcVclVci
Indicates the local VCI value. VCI is short for Virtual Channel Identifier.
The VCI value ranges from 0 to 65535. Generally, the values 3, 4 and 65535 are
reserved for specail use.
ATM-TC-MIBAtmVcIdentifier
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2011.5.25.156.1.3.1.3
hwAtmMapPvcRemoteVclVci
Indicates the peer VCI value. VCI is short for Virtual Channel Identifier.
The VCI value ranges from 0 to 65535. Generally, the values 3, 4 and 65535 are
reserved for specail use.
ATM-TC-MIBAtmVcIdentifierr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2011.5.25.156.1.3.1.11
hwAtmMapPvcRemoteVclVpi
Indicates the peer VPI value. The value is an integer.
For UNI interface, VPI value ranging from 0 to 255;
For NNI interface, VPI value ranging from 0 to 4095.
ATM-TC-MIBAtmVpIdentifierr/w
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2011.5.25.156.1.3.1.12
hwAtmMapPvcBi
Description.
Enumerationr/w
Enumerated Values:
0downdirectional
1bidirectional
 .1.3.6.1.4.1.2011.5.25.156.1.3.1.13
hwAtmMapPvcRowStatus
This variable is used to create or delete an object.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.156.1.3.1.51

hwAtmServiceTable

table
.1.3.6.1.4.1.2011.5.25.156.1.4 · 1 row entry · 8 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmServiceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ATM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ATM-MIB::hwAtmServiceTable' 
This table is used to configure the service type and related parameters
for the PVC.
hwAtmServiceEntry row .1.3.6.1.4.1.2011.5.25.156.1.4.1
This table is used to configure the service type for the PVC.
Indexes
Column Syntax OID
hwAtmServiceName
Indicates the name of the service type. The name is a string
of 1 to 31 characters.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.2011.5.25.156.1.4.1.1
hwAtmServiceType
Set the service type for the PVC as required.
Enumerationr/w
Enumerated Values:
1cbr
2vbrNrt
3vbrRt
4ubr
5ubrPlus
 .1.3.6.1.4.1.2011.5.25.156.1.4.1.11
hwAtmServiceOutputPcr
Indicates the peak output rate of the ATM cell.
When hwPvcServiceTableType is ubr, the peak output rate is 0.
Integer32r/w
Constraints:
range: 0-0
range: 8-599040
 .1.3.6.1.4.1.2011.5.25.156.1.4.1.12
hwAtmServiceOutputScr
Indicates the peak output rate of the ATM cell.
When hwPvcServiceTableType is cbr or ubr, the peak output rate is 0.
Integer32r/w
Constraints:
range: 0-0
range: 8-599040
 .1.3.6.1.4.1.2011.5.25.156.1.4.1.13
hwAtmServiceOutputMbs
Indicates the peak output rate of the ATM cell.
When hwPvcServiceTableType is cbr or ubr, the peak output rate is 0.
Integer32r/w
Constraints:
range: 0-512
 .1.3.6.1.4.1.2011.5.25.156.1.4.1.14
hwAtmServiceCbrCdvtValue
Indicates the limit of the ATM cell delay variation.
When hwPvcServiceTableType is cbr, the variable is valid.
For other service types, the variable is 0.
Integer32r/w
Constraints:
range: 0-10000000
 .1.3.6.1.4.1.2011.5.25.156.1.4.1.15
hwAtmServiceOutputMcr
Indicates the mini width guarantee bit rate of the ATM cell.
When hwPvcServiceTableType is ubr, the peak output rate is 0.
Integer32r/w
Constraints:
range: 0-0
range: 8-599040
 .1.3.6.1.4.1.2011.5.25.156.1.4.1.16
hwAtmServiceRowStatus
This variable is used to create or delete an object.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.156.1.4.1.51

hwAtmPvcServiceTable

table
.1.3.6.1.4.1.2011.5.25.156.1.5 · 1 row entry · 8 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmPvcServiceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ATM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ATM-MIB::hwAtmPvcServiceTable' 
This table is used to configure the service type for the PVC.
hwAtmPvcServiceEntry row .1.3.6.1.4.1.2011.5.25.156.1.5.1
This table is used to configure the service type for the PVC.
Indexes
Column Syntax OID
hwAtmPvcServiceIfIndex
Indicates the interface index.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.156.1.5.1.1
hwAtmPvcServiceVpi
Indicates the local VPI value. The value is an integer.
For UNI interface, VPI value ranging from 0 to 255;
For NNI interface, VPI value ranging from 0 to 4095.
ATM-TC-MIBAtmVpIdentifier
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2011.5.25.156.1.5.1.2
hwAtmPvcServiceVci
Indicates the local VCI value. VCI is short for Virtual Channel Identifier.
The VCI value ranges from 0 to 65535. Generally, the values 3, 4 and 65535
are reserved for specail use.
ATM-TC-MIBAtmVcIdentifier
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2011.5.25.156.1.5.1.3
hwAtmPvcServiceName
Indicates the name of the service type. The name is a string
of 1 to 31 characters.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.2011.5.25.156.1.5.1.11
hwAtmPvcTransmittalDirection
Indicates the input or output tpye of the service type.
Enumeration
Enumerated Values:
1input
2output
 .1.3.6.1.4.1.2011.5.25.156.1.5.1.21
hwAtmPvcPriority
Indicates the priority of the output service.
Integer32r/w
Constraints:
range: 1-7
 .1.3.6.1.4.1.2011.5.25.156.1.5.1.22
hwAtmPvcServiceBuffer
The range of buffer,0xFFFFFFFF is invalid value for ima/serial interface which not support.
Integer32r/w
Constraints:
range: -1--1
range: 128-8192
 .1.3.6.1.4.1.2011.5.25.156.1.5.1.23
hwAtmPvcServiceRowStatus
This variable is used to create or delete an object.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.156.1.5.1.51

hwAtmVpVlanMapTable

table
.1.3.6.1.4.1.2011.5.25.156.1.6 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmVpVlanMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ATM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ATM-MIB::hwAtmVpVlanMapTable' 
This table is used to configure the VP vlan map.
hwAtmVpVlanMapEntry row .1.3.6.1.4.1.2011.5.25.156.1.6.1
This table is used to configure the VP vlan map.
Indexes
Column Syntax OID
hwAtmVpVlanMapIfIndex
Indicates the interface index.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.156.1.6.1.1
hwAtmVpVlanMapVpi
VPI.
ATM-TC-MIBAtmVpIdentifier
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2011.5.25.156.1.6.1.2
hwAtmVpVlanMapPeVid
PE VLAN ID.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.2011.5.25.156.1.6.1.11
hwAtmVpVlanMapRowStatus
RowStatus.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.156.1.6.1.51

hwAtmVcVlanMapTable

table
.1.3.6.1.4.1.2011.5.25.156.1.7 · 1 row entry · 9 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmVcVlanMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ATM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ATM-MIB::hwAtmVcVlanMapTable' 
This table is used to configure the VC vlan map.
hwAtmVcVlanMapEntry row .1.3.6.1.4.1.2011.5.25.156.1.7.1
This table is used to configure the VC vlan map.
Indexes
Column Syntax OID
hwAtmVcVlanMapIfIndex
Indicates the interface index.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.156.1.7.1.1
hwAtmVcVlanMapVpi
VPI.
ATM-TC-MIBAtmVpIdentifier
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2011.5.25.156.1.7.1.2
hwAtmVcVlanMapBeginVci
Begin VCI Value, not config 3 or 4.
Integer32r/w
Constraints:
range: 0-2
range: 5-65534
 .1.3.6.1.4.1.2011.5.25.156.1.7.1.11
hwAtmVcVlanMapEndVci
End VCI Value, not config 3 or 4.
Integer32r/w
Constraints:
range: 5-65534
range: 0-2
 .1.3.6.1.4.1.2011.5.25.156.1.7.1.12
hwAtmVcVlanMapCeVid
CE VLAN ID.
Integer32r/w
Constraints:
range: 0-4089
 .1.3.6.1.4.1.2011.5.25.156.1.7.1.13
hwAtmVpVlanMapServiceName
Indicates the name of the service type. The name is a string
of 1 to 31 characters.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.2011.5.25.156.1.7.1.14
hwAtmVcVlanMapPiority
Piority.
Integer32r/w
Constraints:
range: 1-7
 .1.3.6.1.4.1.2011.5.25.156.1.7.1.15
hwAtmVcVlanMapPBit
Indicates the p-bit value,the default value is 0.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2011.5.25.156.1.7.1.18
hwAtmVcVlanMapRowStatus
RowStatus.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.156.1.7.1.51

hwAtmPvpServiceTable

table
.1.3.6.1.4.1.2011.5.25.156.1.8 · 1 row entry · 7 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmPvpServiceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ATM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ATM-MIB::hwAtmPvpServiceTable' 
This table is used to configure the service type for the PVP.
hwAtmPvpServiceEntry row .1.3.6.1.4.1.2011.5.25.156.1.8.1
This table is used to configure the service type for the PVP.
Indexes
Column Syntax OID
hwAtmPvpServiceIfIndex
Indicates the interface index.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.156.1.8.1.1
hwAtmPvpServiceVpi
Indicates the local VPI value. The value is an integer.
For UNI interface, VPI value ranging from 0 to 255;
For NNI interface, VPI value ranging from 0 to 4095.
ATM-TC-MIBAtmVpIdentifier
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2011.5.25.156.1.8.1.2
hwAtmPvpServiceName
Indicates the name of the service type. The name is a string
of 1 to 31 characters.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.2011.5.25.156.1.8.1.11
hwAtmPvpTransmittalDirection
Indicates the input or output tpye of the service type.
Enumerationr/w
Enumerated Values:
1input
2output
 .1.3.6.1.4.1.2011.5.25.156.1.8.1.21
hwAtmPvpPriority
Indicates the priority of the output service.
Integer32r/w
Constraints:
range: 1-7
 .1.3.6.1.4.1.2011.5.25.156.1.8.1.22
hwAtmPvpServiceBuffer
The range of buffer,0xFFFFFFFF is invalid value for ima/serial interface which not support
Integer32r/w
Constraints:
range: -1--1
range: 128-8192
 .1.3.6.1.4.1.2011.5.25.156.1.8.1.23
hwAtmPvpServiceRowStatus
This variable is used to create or delete an object.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.156.1.8.1.51

hwAtmPvcStatisticTable

table
.1.3.6.1.4.1.2011.5.25.156.1.9 · 1 row entry · 18 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmPvcStatisticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ATM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ATM-MIB::hwAtmPvcStatisticTable' 
This table is used to configure pvc statistic including inputPackets,
inputBytes,inputPktErrors,outputPackets,outputBytes and outputPktErrors.
hwAtmPvcStatisticEntry row .1.3.6.1.4.1.2011.5.25.156.1.9.1
This table is used to configure pvc statistic including inputPackets,
inputBytes,inputPktErrors,outputPackets,outputBytes and outputPktErrors.
Indexes
Column Syntax OID
hwAtmPvcStatisticIfIndex
This object indicates the interface index.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.156.1.9.1.1
hwAtmPvcStatisticVpi
This object indicates the virtual path identifier (VPI) of ATM. The value is an integer.
For a UNI, the value ranges from 0 to 255.
For an NNI, the value ranges from 0 to 4095.
ATM-TC-MIBAtmVpIdentifier
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2011.5.25.156.1.9.1.2
hwAtmPvcStatisticVci
This object indicates the virtual channel identifier (VCI) of ATM.
ATM-TC-MIBAtmVcIdentifier
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2011.5.25.156.1.9.1.3
hwAtmPvcStatisticInputPackets
This object indicates the number of received packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.156.1.9.1.11
hwAtmPvcStatisticInputBytes
This object indicates the number of received bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.156.1.9.1.12
hwAtmPvcStatisticInputPktErrors
This object indicates the number of received error packets.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.156.1.9.1.13
hwAtmPvcStatisticInputCells
This object indicates the number of received cells.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.156.1.9.1.14
hwAtmPvcStatisticInputCellErrors
This object indicates the number of received error cells.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.156.1.9.1.15
hwAtmPvcStatisticOutputPackets
This object indicates the number of sent packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.156.1.9.1.16
hwAtmPvcStatisticOutputBytes
This object indicates the number of sent bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.156.1.9.1.17
hwAtmPvcStatisticOutputPktErrors
This object indicates the number of sent error packets.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.156.1.9.1.18
hwAtmPvcStatisticOutputCells
This object indicates the number of sent cells.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.156.1.9.1.19
hwAtmPvcStatisticOutputCellErrors
This object indicates the number of sent error cells.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.156.1.9.1.20
hwAtmPvcStatisticInputCellDrops
This object indicates the number of discarded received cells.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.156.1.9.1.21
hwAtmPvcStatisticInputPktDrops
This object indicates the number of discarded received packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.156.1.9.1.22
hwAtmPvcStatisticOutputCellDrops
This object indicates the number of discarded sent cells.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.156.1.9.1.23
hwAtmPvcStatisticOutputPktDrops
This object indicates the number of discarded sent packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.156.1.9.1.24
hwAtmPvcStatisticReset
This object indicates cleared statistics.
Enumerationr/w
Enumerated Values:
1reset
2ready
 .1.3.6.1.4.1.2011.5.25.156.1.9.1.51

hwAtmIfConfTable

table
.1.3.6.1.4.1.2011.5.25.156.1.11 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmIfConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ATM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ATM-MIB::hwAtmIfConfTable' 
Indicates the configuration of the ATM interface.
hwAtmIfConfEntry row .1.3.6.1.4.1.2011.5.25.156.1.11.1
Indicates the configuration of the ATM interface.
Indexes
Column Syntax OID
hwAtmIfConfIfIndex
Indicates the interface index.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.156.1.11.1.1
hwAtmIfConfMaxVccs
Indicates the maximum number of the PVCs. Only main-interfaces encapsulated
with ATM protocol can be set.
Integer32r/w
Constraints:
range: 1-16384
 .1.3.6.1.4.1.2011.5.25.156.1.11.1.11
hwAtmIfConfOperVccs
Indicates the number of the configured PVCs.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.156.1.11.1.12
hwAtmIfConfIntfType
This object indicates the type of the serial interface with the ATM protocol.
Only main-interfaces encapsulated with ATM protocol can be set.
Enumerationr/w
Enumerated Values:
1uni
2nni
 .1.3.6.1.4.1.2011.5.25.156.1.11.1.13
hwAtmIfConfCellTransfer
This object indicates whether the cell transfer function is enabled.
By default, the cell transfer function is enabled on IMA sub-interfaces
and serial sub-interfaces and disabled on other types of interfaces.
This obje…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.156.1.11.1.14

hwAtmVplTable

table
.1.3.6.1.4.1.2011.5.25.156.1.12 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmVplTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ATM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ATM-MIB::hwAtmVplTable' 
Indicates the configuration of the ATM PVP.
hwAtmVplEntry row .1.3.6.1.4.1.2011.5.25.156.1.12.1
Indicates the configuration of the ATM PVP.
Indexes
Column Syntax OID
hwAtmVplIfIndex
Indicates the interface index.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.156.1.12.1.1
hwAtmVplVpi
VPI.
ATM-TC-MIBAtmVpIdentifier
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2011.5.25.156.1.12.1.2
hwAtmVplRowStatus
Indicates the status of the row.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.156.1.12.1.51

hwAtmVclTable

table
.1.3.6.1.4.1.2011.5.25.156.1.13 · 1 row entry · 7 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmVclTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ATM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ATM-MIB::hwAtmVclTable' 
Indicates the configuration of the ATM PVC.
hwAtmVclEntry row .1.3.6.1.4.1.2011.5.25.156.1.13.1
Indicates the configuration of the ATM PVC.
Indexes
Column Syntax OID
hwAtmVclIfIndex
Indicates the interface index.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.156.1.13.1.1
hwAtmVclVpi
VPI.
ATM-TC-MIBAtmVpIdentifier
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2011.5.25.156.1.13.1.2
hwAtmVclVci
VCI.
ATM-TC-MIBAtmVcIdentifier
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2011.5.25.156.1.13.1.3
hwAtmVclName
Indicates the name of the PVC.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.5.25.156.1.13.1.11
hwAtmVccAal5EncapsType
Indicates the encapsulation mode of AAL5.
aal5snap: LLC/SNAP (Logical Link Control (LLC)/Subnet Access Protocol (SNAP)) encapsulation type.
aal5mux: MUX encapsulation type.
aal5muxnonstandard: nonstandard MUX encapsulat…
Enumerationr/w
Enumerated Values:
1aal5Snap
2aal5Mux
3aal5MuxNonstandard
4aal5Nlpid
5aal5NlpidIetf
6aal5Auto
 .1.3.6.1.4.1.2011.5.25.156.1.13.1.12
hwAtmVclRowStatus
Indicates the status of the row.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.156.1.13.1.51
hwAtmVclDescr
Indicates the Description of the PVC.
OctetStringr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.2011.5.25.156.1.13.1.52

hwAtmPvcIpoaTable

table
.1.3.6.1.4.1.2011.5.25.156.1.14 · 1 row entry · 6 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmPvcIpoaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ATM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ATM-MIB::hwAtmPvcIpoaTable' 
This table is used to configure the IPoA mapping on the PVC.
hwAtmPvcIpoaEntry row .1.3.6.1.4.1.2011.5.25.156.1.14.1
This table is used to configure the IPoA mapping on the PVC.
Indexes
Column Syntax OID
hwAtmPvcIpoaType
Indicates the type of the PVC IPoA mapping.
ip: sets the peer IP address and mask that are mapped to the PVC.
default: configures a mapping with default route attributes.
If no mapping of the next hop address of a packe…
Enumeration
Enumerated Values:
1ip
2default
3inarp
 .1.3.6.1.4.1.2011.5.25.156.1.14.1.3
hwAtmPvcIpoaIpAddress
Indicates the peer IP address mapped to the PVC.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.156.1.14.1.4
hwAtmPvcIpoaIpMask
Indicates the IP address mask. The IP address mask is an optional parameter.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.156.1.14.1.11
hwAtmPvcIpoaInarpInterval
Indicates the interval for sending InARP packets. The parameter is optional.
The value ranges from 1 to 600 in seconds. If the type of the PVC IPoA
mapping is IP or default, the value is 0. The default value is 1.
Integer32r/w
Constraints:
range: 0-600
 .1.3.6.1.4.1.2011.5.25.156.1.14.1.12
hwAtmPvcIpoaBroadcast
If a mapping with this attribute is configured on the PVC,
broadcast packets on the interface where the PVC resides
will be sent over the PVC.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.156.1.14.1.13
hwAtmPvcIpoaRowStatus
RowStatus.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.156.1.14.1.51

hwAtmPvcBridgeTable

table
.1.3.6.1.4.1.2011.5.25.156.1.15 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmPvcBridgeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ATM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ATM-MIB::hwAtmPvcBridgeTable' 
This table is used to configure the IPoEoA mapping and PPPoEoA mapping on the
          
PVC.
hwAtmPvcBridgeEntry row .1.3.6.1.4.1.2011.5.25.156.1.15.1
This table is used to configure the IPoEoA mapping and PPPoEoA mapping on the

PVC.
Indexes
Column Syntax OID
hwAtmPvcBridgeDstIfIndex
Indicates the index of the VE interface.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.2011.5.25.156.1.15.1.11
hwAtmPvcBridgeBroadcast
Indicates the PVC can forward bridge packets.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.156.1.15.1.12
hwAtmPvcBridgeRowStatus
RowStatus.
Only 'createAndGo' and 'destroy' is supported.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.156.1.15.1.51

hwAtmPvcPppTable

table
.1.3.6.1.4.1.2011.5.25.156.1.16 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmPvcPppTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ATM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ATM-MIB::hwAtmPvcPppTable' 
This table is used to configure the PPPoA mapping on the PVC.
hwAtmPvcPppEntry row .1.3.6.1.4.1.2011.5.25.156.1.16.1
This table is used to configure the PPPoA mapping on the PVC.
Indexes
Column Syntax OID
hwAtmPvcPppDstIfIndex
Indicates the index of the VT or dialer interface.
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.156.1.16.1.11
hwAtmPvcPppServer
Indicates the node is server or not.
By default, the node is not server.
true: indicates the node is server.
false: indicates the node is not server.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.156.1.16.1.12
hwAtmPvcPppRowStatus
RowStatus.
Only 'createAndGo' and 'destroy' is supported.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.156.1.16.1.51

hwAtmPvcOAMLoopbackTable

table
.1.3.6.1.4.1.2011.5.25.156.1.17 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmPvcOAMLoopbackTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ATM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ATM-MIB::hwAtmPvcOAMLoopbackTable' 
This table is used to configure OAM F5 Loopback,
enable the sending of OAM F5 Loopback cells,
and configure the parameters of the retransmission check
or modify the parameters of the retransmission check.
hwAtmPvcOAMLoopbackEntry row .1.3.6.1.4.1.2011.5.25.156.1.17.1
This table is used to configure OAM F5 Loopback.
Indexes
Column Syntax OID
hwAtmPvcOAMLoopbackFrequency
Indicates the interval for sending OAM F5 Loopback cells.
Integer32r/w
Constraints:
range: 1-600
 .1.3.6.1.4.1.2011.5.25.156.1.17.1.11
hwAtmPvcOAMLoopbackUpCount
Indicates the number of continuous OAM F5 Loopback cells that must be received

before the PVC turns Up.
Integer32r/w
Constraints:
range: 1-600
 .1.3.6.1.4.1.2011.5.25.156.1.17.1.12
hwAtmPvcOAMLoopbackDownCount
Indicates the number of continuous OAM F5 Loopback cells that are not received

before the PVC turns Down.
Integer32r/w
Constraints:
range: 1-600
 .1.3.6.1.4.1.2011.5.25.156.1.17.1.13
hwAtmPvcOAMLoopbackRetryFrequency
Indicates the interval for sending cells during OAM F5 Loopback retransmission

verification before the PVC status changes.
Integer32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.2011.5.25.156.1.17.1.14
hwAtmPvcOAMLoopbackRowStatus
RowStatus
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.156.1.17.1.51

hwAtmPvpLimitTable

table
.1.3.6.1.4.1.2011.5.25.156.1.18 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmPvpLimitTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ATM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ATM-MIB::hwAtmPvpLimitTable' 
This table is used to configure the VP limit. To monitor the VP, configure
          
related VP parameters.
hwAtmPvpLimitEntry row .1.3.6.1.4.1.2011.5.25.156.1.18.1
This table is used to configure the VP limit.
Indexes
Column Syntax OID
hwAtmPvpLimitIfIndex
Indicates the interface index.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.156.1.18.1.1
hwAtmPvpLimitVpi
VPI.
ATM-TC-MIBAtmVpIdentifier
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2011.5.25.156.1.18.1.2
hwAtmPvpLimitPeakRate
VCI.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.156.1.18.1.11
hwAtmPvpLimitRowStatus
RowStatus.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.156.1.18.1.51

hwAtmPvcGroupTable

table
.1.3.6.1.4.1.2011.5.25.156.1.19 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmPvcGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ATM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ATM-MIB::hwAtmPvcGroupTable' 
This table is used to create or delete the pvc-group, and get the TOS type or state of the pvc-group.
hwAtmPvcGroupEntry row .1.3.6.1.4.1.2011.5.25.156.1.19.1
This table is used to create or delete the pvc-group, and get the TOS type or state of the pvc-group.
Indexes
Column Syntax OID
hwAtmPvcGroupTosType
Indicates the TOS type. The default value is 1.
Enumeration
Enumerated Values:
1none
2precedence
3dscp
 .1.3.6.1.4.1.2011.5.25.156.1.19.1.1
hwAtmPvcGroupState
Indicates the state of the pvc-group.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2011.5.25.156.1.19.1.2
hwAtmPvcGroupName
Indicates the name of the pvc-group. Only support visible characters.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.5.25.156.1.19.1.3
hwAtmPvcGroupRowStatus
RowStatus.
Only 'createAndGo' and 'destroy' is supported.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.156.1.19.1.51

hwAtmPvcGroupMemTable

table
.1.3.6.1.4.1.2011.5.25.156.1.20 · 1 row entry · 8 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmPvcGroupMemTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ATM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ATM-MIB::hwAtmPvcGroupMemTable' 
This table is used to configure the member PVC and TOS type and TOS type value on the pvc-group.
hwAtmPvcGroupMemEntry row .1.3.6.1.4.1.2011.5.25.156.1.20.1
This table is used to configure the member PVC and TOS type and TOS type value on the pvc-group.
Indexes
Column Syntax OID
hwAtmPvcGroupMemVpi
Indicates the VPI of the member PVC in pvc-group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.156.1.20.1.1
hwAtmPvcGroupMemVci
Indicates the VCI of the member PVC in pvc-group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.156.1.20.1.2
hwAtmPvcGroupMemName
Indicates the name of the member PVC of the pvc-group.
Only support visible characters.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.5.25.156.1.20.1.3
hwAtmPvcGroupMemMinGrade
Indicates the minimum value of the TOS with one member PVC.
If the TOS type is precedence, the maximum value cannot be larger than 7.
Return 255 when this value is not configed.
Integer32r/w
Constraints:
range: 0-63
range: 255-255
 .1.3.6.1.4.1.2011.5.25.156.1.20.1.4
hwAtmPvcGroupMemMaxGrade
Indicates the maximum value of the TOS with one member PVC.
If the TOS type is precedence, the maximum value cannot be larger than 7.
Return 255 when this value is not configed.
Integer32r/w
Constraints:
range: 0-63
range: 255-255
 .1.3.6.1.4.1.2011.5.25.156.1.20.1.5
hwAtmPvcGroupMemDefault
Indicates the PVC is default PVC or not.
By default, the default TOS is disabled.
true: with default. false: without default.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.156.1.20.1.6
hwAtmPvcGroupMemTosType
Indicates the TOS type. The default value is 1.
Enumerationr/w
Enumerated Values:
1none
2precedence
3dscp
 .1.3.6.1.4.1.2011.5.25.156.1.20.1.7
hwAtmPvcGroupMemRowStatus
RowStatus.
Only 'createAndGo' and 'destroy' is supported.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.156.1.20.1.51

hwAtmPvcDynamicTable

table
.1.3.6.1.4.1.2011.5.25.156.1.21 · 1 row entry · 8 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmPvcDynamicTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ATM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ATM-MIB::hwAtmPvcDynamicTable' 
This table is used to configure the auto PVC.
hwAtmPvcDynamicEntry row .1.3.6.1.4.1.2011.5.25.156.1.21.1
This table is used to configure the auto PVC.
Indexes
Column Syntax OID
hwAtmPvcDynamicIfIndex
Indicates the index of ATM interface which support auto PVC.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.156.1.21.1.1
hwAtmPvcDynamicStartVpi
The start VPI of auto PVC.
ATM-TC-MIBAtmVpIdentifier
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2011.5.25.156.1.21.1.2
hwAtmPvcDynamicStartVci
The start VCI of auto PVC.
ATM-TC-MIBAtmVcIdentifier
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2011.5.25.156.1.21.1.3
hwAtmPvcDynamicEndVpi
The end VPI of auto PVC.
ATM-TC-MIBAtmVpIdentifier
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2011.5.25.156.1.21.1.4
hwAtmPvcDynamicEndVci
The end VCI of auto PVC.
ATM-TC-MIBAtmVcIdentifier
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2011.5.25.156.1.21.1.5
hwAtmPvcDynamicAdminStatus
Indicates the administrative status of auto PVC.
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2011.5.25.156.1.21.1.6
hwAtmPvcDynamicAal5EncapsType
Indicates the encapsulation mode of AAL5.
aal5snap: LLC/SNAP (Logical Link Control (LLC)/Subnet Access Protocol (SNAP)) encapsulation type.
aal5mux: MUX encapsulation type.
aal5muxnonstandard: nonstandard MUX encapsulat…
Enumerationr/w
Enumerated Values:
1aal5Snap
2aal5Mux
3aal5MuxNonstandard
4aal5Nlpid
5aal5NlpidIetf
6aal5Auto
 .1.3.6.1.4.1.2011.5.25.156.1.21.1.7
hwAtmPvcDynamicRowStatus
RowStatus.
Only 'createAndGo' and 'destroy' is supported.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.156.1.21.1.8

hwAtmPvcDynamicPppTable

table
.1.3.6.1.4.1.2011.5.25.156.1.22 · 1 row entry · 2 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmPvcDynamicPppTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ATM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ATM-MIB::hwAtmPvcDynamicPppTable' 
This table is used to configure the map PPP on auto PVC.
hwAtmPvcDynamicPppEntry row .1.3.6.1.4.1.2011.5.25.156.1.22.1
This table is used to configure the map PPP on auto PVC.
Indexes
Column Syntax OID
hwAtmPvcDynamicPppDstIfIndex
Indicates the index of the VT interface.
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.156.1.22.1.1
hwAtmPvcDynamicPppRowStatus
RowStatus.
Only 'createAndGo' and 'destroy' is supported.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.156.1.22.1.2

hwAtmPvcDynamicBridgeTable

table
.1.3.6.1.4.1.2011.5.25.156.1.23 · 1 row entry · 2 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmPvcDynamicBridgeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ATM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ATM-MIB::hwAtmPvcDynamicBridgeTable' 
This table is used to configure the map bridge on auto PVC.
hwAtmPvcDynamicBridgeEntry row .1.3.6.1.4.1.2011.5.25.156.1.23.1
This table is used to configure the map bridge on auto PVC.
Indexes
Column Syntax OID
hwAtmPvcDynamicBridgeDstIfIndex
Indicates the index of the VE interface.
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.156.1.23.1.1
hwAtmPvcDynamicBridgeRowStatus
RowStatus.
Only 'createAndGo' and 'destroy' is supported.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.156.1.23.1.2

hwAtmTrunkTable

table
.1.3.6.1.4.1.2011.5.25.156.1.24 · 1 row entry · 2 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmTrunkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ATM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ATM-MIB::hwAtmTrunkTable' 
This table is used to configure the parameters of the atm trunk interface.
hwAtmTrunkEntry row .1.3.6.1.4.1.2011.5.25.156.1.24.1
This table is used to configure the parameters of the atm trunk interface.
Indexes
Column Syntax OID
hwAtmTrunkIfIndex
Indicates the interface index.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.156.1.24.1.1
hwAtmTrunkWorkMode
Indicates the work mode of atm trunk.
Enumerationr/w
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.2011.5.25.156.1.24.1.2

hwAtmVpcConnectivityTestTable

table
.1.3.6.1.4.1.2011.5.25.156.1.25 · 1 row entry · 6 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmVpcConnectivityTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ATM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ATM-MIB::hwAtmVpcConnectivityTestTable' 
Description.
hwAtmVpcConnectivityTestEntry row .1.3.6.1.4.1.2011.5.25.156.1.25.1
Description.
Indexes
Column Syntax OID
hwAtmVpcConnectivityTestIfIndex
Indicates the interface index.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.156.1.25.1.1
hwAtmVpcConnectivityTestVpi
VPI.
ATM-TC-MIBAtmVpIdentifier
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2011.5.25.156.1.25.1.2
hwAtmVpcConnectivityTestLLID
Loopback Local Identify.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.5.25.156.1.25.1.3
hwAtmVpcConnectivityTestResult
Indicates the result of the test.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.156.1.25.1.4
hwAtmVpcConnectivityTestIfName
Indicates the interface name.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.5.25.156.1.25.1.5
hwAtmVpcConnectivityTestRowStatus
Indicates the status of the row.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.156.1.25.1.51

hwAtmVccConnectivityTestTable

table
.1.3.6.1.4.1.2011.5.25.156.1.26 · 1 row entry · 7 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmVccConnectivityTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ATM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ATM-MIB::hwAtmVccConnectivityTestTable' 
Description.
hwAtmVccConnectivityTestEntry row .1.3.6.1.4.1.2011.5.25.156.1.26.1
Description.
Indexes
Column Syntax OID
hwAtmVccConnectivityTestIfIndex
Indicates the interface index.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.156.1.26.1.1
hwAtmVccConnectivityTestVpi
VPI.
ATM-TC-MIBAtmVpIdentifier
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2011.5.25.156.1.26.1.2
hwAtmVccConnectivityTestVci
VCI.
ATM-TC-MIBAtmVcIdentifier
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2011.5.25.156.1.26.1.3
hwAtmVccConnectivityTestLLID
Loopback Local Identify.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.5.25.156.1.26.1.4
hwAtmVccConnectivityTestResult
Indicates the result of the test.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.156.1.26.1.5
hwAtmVccConnectivityTestIfName
Indicates the interface name.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.2011.5.25.156.1.26.1.6
hwAtmVccConnectivityTestRowStatus
Indicates the status of the row.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.156.1.26.1.51

hwAtmPvcQueueStatisticTable

table
.1.3.6.1.4.1.2011.5.25.156.1.27 · 1 row entry · 8 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmPvcQueueStatisticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ATM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ATM-MIB::hwAtmPvcQueueStatisticTable' 
This table is used to configure pvc-queue statistic including outputPackets,
outputBytes and outputDropPackets.
hwAtmPvcQueueStatisticEntry row .1.3.6.1.4.1.2011.5.25.156.1.27.1
This table is used to configure pvc-queue statistic including outputPackets,
outputBytes and outputDropPackets.
Indexes
Column Syntax OID
hwAtmPvcQueueStatisticIfIndex
This object indicates the interface index.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.5.25.156.1.27.1.1
hwAtmPvcQueueStatisticVpi
This object indicates the virtual path identifier (VPI) of ATM. The value is an integer.
For a UNI, the value ranges from 0 to 255.
For an NNI, the value ranges from 0 to 4095.
ATM-TC-MIBAtmVpIdentifier
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2011.5.25.156.1.27.1.2
hwAtmPvcQueueStatisticVci
This object indicates the virtual channel identifier (VCI) of ATM.
ATM-TC-MIBAtmVcIdentifier
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2011.5.25.156.1.27.1.3
hwAtmPvcQueueStatisticQueueIndex
This object indicates the queue priority.
Enumeration
Enumerated Values:
1be
2af1
3af2
4af3
5af4
6ef
7cs6
8cs7
 .1.3.6.1.4.1.2011.5.25.156.1.27.1.4
hwAtmPvcQueueStatisticReset
This object indicates cleared statistics.
Enumerationr/w
Enumerated Values:
1reset
2ready
 .1.3.6.1.4.1.2011.5.25.156.1.27.1.5
hwAtmPvcQueueStatisticTxPks
This object indicates the number of sent packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.156.1.27.1.6
hwAtmPvcQueueStatisticTxBytes
This object indicates the number of sent bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.156.1.27.1.7
hwAtmPvcQueueStatisticTxDropPks
This object indicates the number of discarded sent packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.156.1.27.1.8