hwAtmFlagJ0Trace
HUAWEI-ATM-MIB ·
.1.3.6.1.4.1.2011.5.25.156.1.1.1.19
Object
column
r/w
OctetString
Set section trace byte. When hwAtmFlagJ0Mode is set to j016ByteMode or j064ByteOrNullMode, this variable takes effect. When hwAtmFlagJ0Mode is set to j016ByteMode, the value of this variable is up to 15 characters trace byte. When hwAtmFlagJ0Mode is set to j064ByteOrNullMode, the value of this variable is up to 64 characters trace byte.
Context
- MIB
- HUAWEI-ATM-MIB
- OID
.1.3.6.1.4.1.2011.5.25.156.1.1.1.19- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwAtmEntry
- Table
- hwAtmTable
- Siblings
- 13
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-64
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwAtmIfIndex Indicates the interface index. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2011.5.25.156.1.1.1.1 |
| hwAtmIfType Indicates the interface type. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.156.1.1.1.11 |
| hwAtmClock Master clock: uses the internal clock signal.
Slave clock: uses the line clock signal. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.156.1.1.1.12 |
| hwAtmFrameFormat For the optical interface STM-1/STM-4, the frame format on the ATM interface
is SDH; for the OC-3/OC-12 interface, the frame format is SONET.
The default frame format is SDH. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.156.1.1.1.13 |
| hwAtmScramble By default, the scramble function is enabled. The scramble function
takes effect only on payload rather than cell header.
true: enables the scramble function. false: disables the … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.156.1.1.1.14 |
| hwAtmLoopback Enable the loopback function of the channel.
local: enables the local loopback on the interface.
remote: enables the remote loopback on the interface.
payload: enables the remote … | column | Enumeration | .1.3.6.1.4.1.2011.5.25.156.1.1.1.15 |
| hwAtmPitp Enable or disable the function of PITP. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.156.1.1.1.16 |
| hwAtmFlagJ0Mode Indicates the overhead byte of the SDH frame. j0: sets section trace byte.
The default value is j016ByteMode(2);hwAtmFlagJ0Trace:NetEngine. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.156.1.1.1.17 |
| hwAtmFlagJ0Value Indicates the value of j01ByteMode. When hwAtmFlagJ0Mode is set to j01ByteMode, hwAtmFlagJ0Value takes effect. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.156.1.1.1.18 |
| hwAtmFlagJ1Mode Indicates the overhead byte of the SDH frame. j1: sets path trace byte.
The default value is j116ByteMode(2);hwAtmFlagJ1Trace:NetEngine. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.156.1.1.1.20 |
| hwAtmFlagJ1Value Indicates the value of j11ByteMode. When hwAtmFlagJ1Mode is set to j11ByteMode, hwAtmFlagJ1Value takes effect. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.156.1.1.1.21 |
| hwAtmFlagJ1Trace Set path trace byte.
When hwAtmFlagJ1Mode is set to j116ByteMode or j164ByteOrNullMode, this variable takes effect.
When hwAtmFlagJ1Mode is set to j116ByteMode, this variable is u… | column | OctetString | .1.3.6.1.4.1.2011.5.25.156.1.1.1.22 |
| hwAtmFlagC2Value Indicates the overhead byte of the SDH frame.
c2: indicates the signal label byte. It is a hexdecimal value ranging from 00 to FF.
The default value is 0x02. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.156.1.1.1.23 |