hpnicfEponDeviceObjectFecEnabled
HPN-ICF-EPON-DEVICE-MIB ·
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.4
Object
column
r/w
Enumeration
This variable defines and provides information whether the EPON device uses FEC as defined in the [802.3ah] clause 65.2 for EPON. When noFECEnabled(1) the device does not support FEC mode When fecTxEnabled(2) the device supports the FEC transmission mode. When fecRxEnabled(3) the device supports the FEC Receive mode. When fecTxRxEnabled(4) the device supports the FEC transmission and receive mode. Writing can be done all the time. This attribute is relevant for an OLT and an ONU.
Context
- MIB
- HPN-ICF-EPON-DEVICE-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hpnicfEponDeviceControlEntry
- Table
- hpnicfEponDeviceControlTable
- Siblings
- 8
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | noFecEnabled |
2 | fecTxEnabled |
3 | fecRxEnabled |
4 | fecTxRxEnabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpnicfEponDeviceObjectReset This variable is used to reset the EPON device. The
interface may be unavailable while the reset occurs and
data may be lost. During reading operation it returns
the state of the … | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.1 |
| hpnicfEponDeviceRemoteMACAddressLLIDControl Indicates and controls the resetting of the LLID MAC
address log. Setting this object to none(1) has no
action resetLog(2) empties the LLID MAC address log. All
data is deleted. S… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.10 |
| hpnicfEponDeviceObjectModes This variable defines the mode of the EPON device. When
an olt(1) it is an Optical Line Terminal device (server)
and when an onu(2) and Optical Network Unit device
(client) | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.2 |
| hpnicfEponDeviceObjectOamMode This variable defines and provides information on the
Operation Administration and Maintenance (OAM) mode of
an EPON device as defined by the [802.3ah] clause 57.
When noOam(1) th… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.5 |
| hpnicfEponDeviceObjectDeviceReadyMode This variable defines the mode of an EPON device and
provides information on the mode in initialization -
ready for registration as defined by the [802.3ah]
clause 64.
When notRea… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.6 |
| hpnicfEponDeviceObjectPowerDown Setting this variable to True(1) will cause Device to be
entered into Power down mode where no registration is
allowed and only receiving data from the link.
Writing can be done a… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.7 |
| hpnicfEponDeviceObjectNumberOfLLIDs A read only variable which defines the number of
registered LLIDs (as defined by the [802.3ah] clause 65)
in a EPON network for an OLT and an ONU. Initialization
value is 0.
This … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.8 |
| hpnicfEponDeviceObjectReportThreshold A set of 8 integers, for each LLID, that defines the
threshold reporting for each Queue in the REPORT
message, as defined in [802.3ah] 64. First Queue set
reporting will provide i… | column | TQ (16nsec) SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.9 |