HPN-ICF-EPON-DEVICE-MIB Table View

Table for EPON device MIB modules.

hpnicfEponDeviceControlEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1

An entry in the EPON device Control table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hpnicfEponDeviceObjectReset This variable is used to reset the EPON device. The interface may be unavailable while the reset occurs and data may be lost. During reading operation it returns the state of the EPON device. running(1) indicates and op…	Enumerationr/w Enumerated Values: 1 running 2 reset	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.1
hpnicfEponDeviceObjectModes This variable defines the mode of the EPON device. When an olt(1) it is an Optical Line Terminal device (server) and when an onu(2) and Optical Network Unit device (client)	Enumeration Enumerated Values: 1 olt 2 onu	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.2
hpnicfEponDeviceObjectFecEnabled This variable defines and provides information whether the EPON device uses FEC as defined in the [802.3ah] clause 65.2 for EPON. When noFECEnabled(1) the device does not support FEC mode When fecTxEnabled(2) the device…	Enumerationr/w Enumerated Values: 1 noFecEnabled 2 fecTxEnabled 3 fecRxEnabled 4 fecTxRxEnabled	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.4
hpnicfEponDeviceObjectOamMode This variable defines and provides information on the Operation Administration and Maintenance (OAM) mode of an EPON device as defined by the [802.3ah] clause 57. When noOam(1) the device does not supports the OAM mode.…	Enumerationr/w Enumerated Values: 1 noOam 2 oamServer 3 oamclient	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.5
hpnicfEponDeviceObjectDeviceReadyMode This variable defines the mode of an EPON device and provides information on the mode in initialization - ready for registration as defined by the [802.3ah] clause 64. When notReady(1) the device is not ready for operat…	Enumerationr/w Enumerated Values: 1 notReady 2 inProcess 3 ready	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.6
hpnicfEponDeviceObjectPowerDown Setting this variable to True(1) will cause Device to be entered into Power down mode where no registration is allowed and only receiving data from the link. Writing can be done all the time. This attribute is relevant …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.7
hpnicfEponDeviceObjectNumberOfLLIDs A read only variable which defines the number of registered LLIDs (as defined by the [802.3ah] clause 65) in a EPON network for an OLT and an ONU. Initialization value is 0. This attribute is relevant for an OLT and an …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.8
hpnicfEponDeviceObjectReportThreshold A set of 8 integers, for each LLID, that defines the threshold reporting for each Queue in the REPORT message, as defined in [802.3ah] 64. First Queue set reporting will provide information on the queue occupancy of fra…	TQ (16nsec)SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.9
hpnicfEponDeviceRemoteMACAddressLLIDControl Indicates and controls the resetting of the LLID MAC address log. Setting this object to none(1) has no action resetLog(2) empties the LLID MAC address log. All data is deleted. Setting it to useDefaultReporting(3) retu…	Enumerationr/w Enumerated Values: 1 none 2 resetLog 3 useDefaultReporting	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.1.1.10

A table of read-only value that identifies the
source_address and LLIDs parameter of the remote devices
in the network. This MacAddress value, as defined in
[802.3ah], 30.3.5.1.5, is updated on reception of a
valid frame with a unicast destination Field or
(1) a destination Field equal to the reserved multicast
address for MAC Control specified in [802.3ah] Annex
31A, (2) lengthOrType field value equal to the reserved
Type for MAC Control as specified in [802.3ah] Annex
31A. (3)an MPCP subtype value equal to the subtype
reserved for MPCP as specified in [802.3ah] Annex 31A,
and an LLID as allocated by the OLT. The table is
defined as Remote MAC address - LLID (RMadL)
The table is relevant only for an OLT device, and is
equivalent from a bridge emulation to the bridge
port-MAC address table where the LLIDs are equivalent to
virtual bridge ports.

hpnicfEponDeviceRemoteMACAddressLLIDEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.2.1

A group of entries. Applications create and delete
entries using hpnicfEponDeviceRMadlEntryStatus.
When adding objects to an LLID they are added in the
persistent order of their index in this table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hpnicfEponDeviceRemoteMACAddressLLIDName A locally-unique, administratively assigned name for a group of entries.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.2.1.1
hpnicfEponDeviceRMadlLLID An arbitrary integer for the purpose of identifying the LLID. Writing can be done all the time.	Unsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.2.1.2
hpnicfEponDeviceRMadlLogID The object identifier of a MIB module object to add to an entry, indicating the entry ID in the table. Writing can be done all the time.	ObjectIdentifierr/w	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.2.1.3
hpnicfEponDeviceRMadlRemoteAddress The remote MAC address of the LLID. Writing can be done all the time.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.2.1.4
hpnicfEponDeviceRMadlType A list of types for entries - LLIDs. Indicates and defines the state of registration. notRegister(1) marks a non registered LID, registered(2) marks a registered LLID. Writing can be done all the time.	Enumerationr/w Enumerated Values: 1 notRegister 2 registered	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.2.1.5
hpnicfEponDeviceRMadlAction A list of actions for an entry - LLID. Indicates and defines the state of registration for the remote device. none(1) marks no action, register(2) marks to register an LLID, deregister(3) marks to deregister an LLID, r…	Enumerationr/w Enumerated Values: 1 none 2 register 3 deregister 4 reregister	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.2.1.6
hpnicfEponDeviceRMadlEntryStatus The control that allows creation and deletion of entries. Once made active an entry MAY not be modified except to delete it.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.1.2.1.7

This table defines the list of statistics counters of
EPON devices. The attributes are relevant for an OLT and
an ONU.

hpnicfEponDeviceStatEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1

Table entries for Table of statistics counters of EPON
devices.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hpnicfEponDeviceStatTxFramesQueue0 A count of the number of times a -Queue-0- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-0-. The -Queue-0- marking matched the REPORT MPCP message Queue…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.1
hpnicfEponDeviceStatTxFramesQueue1 A count of the number of times a -Queue-1- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-1-. The -Queue-1- marking matched the REPORT MPCP message Queue…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.2
hpnicfEponDeviceStatTxFramesQueue2 A count of the number of times a -Queue-2- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-2-. The -Queue-2- marking matched the REPORT MPCP message Queue…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.3
hpnicfEponDeviceStatTxFramesQueue3 A count of the number of times a -Queue-3- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-3-. The -Queue-3- marking matched the REPORT MPCP message Queue…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.4
hpnicfEponDeviceStatTxFramesQueue4 A count of the number of times a -Queue-4- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-4-. The -Queue-4- marking matched the REPORT MPCP message Queue…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.5
hpnicfEponDeviceStatTxFramesQueue5 A count of the number of times a -Queue-5- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-5-. The -Queue-5- marking matched the REPORT MPCP message Queue…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.6
hpnicfEponDeviceStatTxFramesQueue6 A count of the number of times a -Queue-6- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-6-. The -Queue-6- marking matched the REPORT MPCP message Queue…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.7
hpnicfEponDeviceStatTxFramesQueue7 A count of the number of times a -Queue-7- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-7-. The -Queue-7- marking matched the REPORT MPCP message Queue…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.8
hpnicfEponDeviceStatRxFramesQueue0 A count of the number of times a -Queue-0- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, w…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.9
hpnicfEponDeviceStatRxFramesQueue1 A count of the number of times a -Queue-1- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, w…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.10
hpnicfEponDeviceStatRxFramesQueue2 A count of the number of times a -Queue-2- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, w…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.11
hpnicfEponDeviceStatRxFramesQueue3 A count of the number of times a -Queue-3- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, w…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.12
hpnicfEponDeviceStatRxFramesQueue4 A count of the number of times a -Queue-4- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, w…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.13
hpnicfEponDeviceStatRxFramesQueue5 A count of the number of times a -Queue-5- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, w…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.14
hpnicfEponDeviceStatRxFramesQueue6 A count of the number of times a -Queue-6- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, w…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.15
hpnicfEponDeviceStatRxFramesQueue7 A count of the number of times a -Queue-7- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment the counter by one for each frame received for each LLID, w…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.16
hpnicfEponDeviceStatDroppedFramesQueue0 A count of the number of times a -Queue-0- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-0-. The -Queue-0- marking matched the REPORT MPCP message Queue-0 field, as defined in [802…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.17
hpnicfEponDeviceStatDroppedFramesQueue1 A count of the number of times a -Queue-1- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-1-. The -Queue-1- marking matched the REPORT MPCP message Queue-1 field, as defined in [802…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.18
hpnicfEponDeviceStatDroppedFramesQueue2 A count of the number of times a -Queue-2- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-2-. The -Queue-2- marking matched the REPORT MPCP message Queue-2 field, as defined in [802…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.19
hpnicfEponDeviceStatDroppedFramesQueue3 A count of the number of times a -Queue-3- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-3-. The -Queue-3- marking matched the REPORT MPCP message Queue-3 field, as defined in [802…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.20
hpnicfEponDeviceStatDroppedFramesQueue4 A count of the number of times a -Queue-4- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-4-. The -Queue-4- marking matched the REPORT MPCP message Queue-4 field, as defined in [802…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.21
hpnicfEponDeviceStatDroppedFramesQueue5 A count of the number of times a -Queue-5- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-5-. The -Queue-5- marking matched the REPORT MPCP message Queue-5 field, as defined in [802…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.22
hpnicfEponDeviceStatDroppedFramesQueue6 A count of the number of times a -Queue-6- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-6-. The -Queue-6- marking matched the REPORT MPCP message Queue-6 field, as defined in [802…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.23
hpnicfEponDeviceStatDroppedFramesQueue7 A count of the number of times a -Queue-7- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-7-. The -Queue-7- marking matched the REPORT MPCP message Queue-7 field, as defined in [802…	framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.2.1.1.24

This table defines the Event Objects for EPON devices.
The attributes are relevant for an OLT and an ONU.

hpnicfEponDeviceEventObjectEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1

Table entries for Table of Event objects for EPON
devices.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hpnicfEponDeviceSampleMinimum The minimum Frequency of events this system will accept. A system may use the larger values of this minimum to lessen the impact of constant sampling. For larger sampling intervals the system samples less often and suff…	secondsInteger32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.1
hpnicfEponDeviceDyingGaspAlarmState A read-only variable, which defines the state of the Dying Gasp indication of the OAM alarm indications as described in the [802.3ah] clause 57. When true the device has a dying gasp alarm asserted. When false the dying…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.2
hpnicfEponDeviceDyingGaspAlarmEnabled A control to allow DyingGaspAlarm event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.3
hpnicfEponDeviceCriticalEventState A read-only variable, which defines the state of the Critical Event indication of the OAM alarm indications as described in the [802.3ah] clause 57. When true the device has a Critical Event asserted. When false the Cri…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.4
hpnicfEponDeviceCriticalEventEnabled A control to allow CriticalEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.5
hpnicfEponDeviceLocalLinkFaultAlarmState A read-only variable, which defines the state of the Local Link Fault indication of the OAM alarm indications as described in the [802.3ah] clause 57. When true the device has a Local Link Fault alarm asserted. When fal…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.6
hpnicfEponDeviceLocalLinkFaultAlarmEnabled A control to allow LocalLinkFaultAlarm event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.7
hpnicfEponDeviceTemperatureEventIndicationState A read-only variable, which defines the state of the Temperature Event indication of an EPON device. When condition of box temperature is above the threshold defined the alarm is asserted. When the condition is below th…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.8
hpnicfEponDeviceTemperatureEventIndicationEnabled A control to allow TemperatureEventIndication event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.9
hpnicfEponDevicePowerVoltageEventIndicationState A read-only variable, which defines the state of the Power/Voltage Event Indication of an EPON device. When condition of box Power/voltage is above the threshold defined the alarm is asserted. When the condition is belo…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.10
hpnicfEponDevicePowerVoltageEventIndicationEnabled A control to allow PowerVoltageEventIndication event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.11
hpnicfEponDeviceGlobalEventState A read-only variable, which defines the state of the Global Event indication of an EPON device. When the indication of the event input occurs the event is asserted. When the input is removed that event is de-asserted. W…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.12
hpnicfEponDeviceGlobalEventEnabled A control to allow GlobalEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.13
hpnicfEponDeviceErroredSymbolPeriodEventState A read-only variable, which defines the state of the Errored Symbol Period Event indication of the OAM alarm TLV indications as described in the [802.3ah] clause 57.5.3. When true the device has an Errored Symbol Period…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.14
hpnicfEponDeviceErroredSymbolPeriodEventEnabled A control to allow ErroredSymbolPeriodEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.15
hpnicfEponDeviceErroredFrameEventState A read-only variable, which defines the state of the Errored Frame Event indication of the OAM alarm TLV indications as described in the [802.3ah] clause 57.5.3. When true the device has an Errored Frame Event asserted.…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.16
hpnicfEponDeviceErroredFrameEventEnabled A control to allow ErroredFrameEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.17
hpnicfEponDeviceErroredFramePeriodEventState A read-only variable, which defines the state of the Errored Frame Period Event indication of the OAM alarm TLV indications as described in the [802.3ah] clause 57.5.3. When true the device has an Errored Frame Period E…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.18
hpnicfEponDeviceErroredFramePeriodEventEnabled A control to allow ErroredFramePeriodEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.19
hpnicfEponDeviceErroredFrameSecondsSummaryEventState A read-only variable, which defines the state of the Errored Frame Seconds Summary Event indication of the OAM alarm TLV indications as described in the [802.3ah] clause 57.5.3. When true the device has an Errored Frame…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.20
hpnicfEponDeviceErroredFrameSecondsSummaryEventEnabled A control to allow ErroredFrameSecondsSummaryEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.21
hpnicfEponDeviceOrganizationSpecificEventState A read-only variable, which defines the state of the Organization Specific Event indication of the OAM alarm TLV indications as described in the [802.3ah] clause 57.5.3. When true the device has an Organization Specific…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.22
hpnicfEponDeviceOrganizationSpecificEventEnabled A control to allow OrganizationSpecificEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be done all the time.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.23
hpnicfEponDeviceEventControl Indicates and controls the resetting of the Event log. Setting this object to none(1) has no action resetLog(2) empties the event log. All data is deleted. Setting it to useDefaultReporting(3) returns all event prioriti…	Enumerationr/w Enumerated Values: 1 none 2 resetLog 3 useDefaultReporting	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.1.1.24

A table of objects provides a log of notification based
on the event as pointed to by entries in those tables.
The intent is a MAC level event log (set of events to
when they happened).
This attribute is relevant for an OLT and an ONU.

hpnicfEponDeviceEventsLogEntry row .1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.2.1

A group of Events. Applications create and delete
entries using hpnicfEponDeviceEventsEntryStatus. When adding
objects to a notification they are added in the lexical
order of their index in this table.

Indexes

hpnicfEponDeviceEventsLogName hpnicfEponDeviceEventsLogIndex

Column	Syntax	OID
hpnicfEponDeviceEventsLogName A locally-unique, administratively assigned name for a group of Events.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.2.1.1
hpnicfEponDeviceEventsLogIndex An arbitrary integer for the purpose of identifying individual Events within a hpnicfEponDeviceEventsLogName group. Events within a group are placed in the notification in the numerical order of this index.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.2.1.2
hpnicfEponDeviceEventsLogID The object identifier of a MIB module object to add to a Notification that results from the event. Writing can be done all the time.	ObjectIdentifierr/w	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.2.1.3
hpnicfEponDeviceEventsLogFirstTime The time that an entry was created.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.2.1.4
hpnicfEponDeviceEventsLogLastTime If multiple events are reported via the same entry, the time that the last event for this entry occurred, otherwise this should have the same value as hpnicfEponDeviceEventsLogFirstTime.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.2.1.5
hpnicfEponDeviceEventsLogCounts The number of consecutive event instances reported by this entry. This starts at 1 with the creation of this row and increments by 1 for each subsequent duplicate event.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.2.1.6
hpnicfEponDeviceEventsLogType A list of types for Events. Events are ordered according to their significance where 1 is the highest severity. hpnicfEponDeviceDyingGaspAlarmState(1) indicates a Dying Gasp Alarm State, hpnicfEponDeviceCriticalEventSt…	Enumeration Enumerated Values: 1 hpnicfEponDeviceDyingGaspAlarmState 2 hpnicfEponDeviceCriticalEventState 3 hpnicfEponDeviceLocalLinkFaultAlarmState 4 hpnicfEponDeviceTemperatureEventIndicationState 5 hpnicfEponDevicePowerVoltageEventIndicationState 6 hpnicfEponDeviceGlobalEventState 7 hpnicfEponDeviceErroredSymbolPeriodEventState 8 hpnicfEponDeviceErroredFrameEventState 9 hpnicfEponDeviceErroredFramePeriodEventState 10 hpnicfEponDeviceErroredFrameSecondsSummaryEventState 11 hpnicfEponDeviceOrganizationSpecificEventState	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.2.1.7
hpnicfEponDeviceEventsLogEntryStatus The control that allows creation and deletion of entries. Once made active an entry MAY not be modified except to delete it.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.15.2.42.4.1.1.3.2.1.8