hpnicfDot11SrvPolicyStatusCM
HPN-ICF-DOT11-CFG-MIB ·
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.25
Object
column
r/w
Enumeration
The status of the Service Policy.
Context
- MIB
- HPN-ICF-DOT11-CFG-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.25- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hpnicfDot11ServicePolicyEntry
- Table
- hpnicfDot11ServicePolicyTable
- Siblings
- 26
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | off |
1 | on |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpnicfDot11ServicePolicyID Represents the ID of each service policy. | column | HPN-ICF-DOT11-REF-MIBHpnicfDot11ServicePolicyIDType | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.1 |
| hpnicfDot11SPInCirMode CIR(committed information rate) mode of inbound direction.
This object is useful only when the corresponding CIR is nonzero.
If value of this object is changed, corresponding CIR … | column | HPN-ICF-DOT11-REF-MIBHpnicfDot11CirMode | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.10 |
| hpnicfDot11SPInCirValue Represents the CIR of inbound direction of this service policy.
If the value is 0, it means that no flow control is applied to
the service policy, and the corresponding CIR mode i… | column | Kbps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.11 |
| hpnicfDot11SPOutCirMode CIR(committed information rate) mode of outbound direction.
This object is useful only when the corresponding CIR is nonzero.
If value of this object is changed, corresponding CIR… | column | HPN-ICF-DOT11-REF-MIBHpnicfDot11CirMode | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.12 |
| hpnicfDot11SPOutCirValue Represents the CIR of outbound direction of this service policy.
If the value is 0, it means that no flow control is applied to
the service policy, and the corresponding CIR mode … | column | Kbps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.13 |
| hpnicfDot11WlanInfPVID Represents the VLAN ID of SSID. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.14 |
| hpnicfDot11SPInCirStaticValue Represents the CIR of inbound direction for static CIR mode. | column | Kbps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.15 |
| hpnicfDot11SPOutCirStaticValue Represents the CIR of outbound direction for static CIR mode. | column | Kbps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.16 |
| hpnicfDot11SPIsolate If it is true, then stations connected with the service policy are
isolated. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.17 |
| hpnicfDot11WlanexAuthServerIP Represents the IP address of the Wlanex Authentication server | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.18 |
| hpnicfDot11SPBeaconMeasEnable If it is true, then beacon-measurement is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.19 |
| hpnicfDot11SSIDName Represents the ESS. As per CLI, the value of
service policy name will be SSID. | column | HPN-ICF-DOT11-REF-MIBHpnicfDot11SSIDStringType | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.2 |
| hpnicfDot11SPBeaconMeasType Represents what the work mode for BeaconMeasurement type.
The following values are supported:
passive, - BeaconMeasurement will use the passive type.
active - BeaconMe… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.20 |
| hpnicfDot11SPBeaconMeasInterval Represents the beacon-measurement interval. | column | second Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.21 |
| hpnicfDot11AuthenModeCM Represents the Authentication mode defined by 802.11. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.22 |
| hpnicfDot11SecIEStatusCM To enable the security Information element in the beacon and
probe response frames sent by AP. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.23 |
| hpnicfDot11SecurityCiphersCM The WLAN system support the following cipher type for data frame
encryption.
none
wep40
wep104
tkip
aesccmp
wpi-SMS4
When the value of node equals to zero, it means no configurati… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.24 |
| hpnicfDot11SSIDHiddenCM This attribute controls whether the SSID will be advertised in
beacon frames.
If it is dot11true, the SSID will not be advertised in beacon
frames. | column | HPN-ICF-DOT11-REF-MIBHpnicfDot11TruthValueCM | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.26 |
| hpnicfDot11SPIsolateCM If it is dot11true, the clients connected with the service policy are
isolated to each other. | column | HPN-ICF-DOT11-REF-MIBHpnicfDot11TruthValueCM | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.27 |
| hpnicfDot11SSIDHidden This attribute controls whether the SSID will be advertised in
the beacon frame.
If it is true, then SSID will not be advertised in the beacon
frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.3 |
| hpnicfDot11AuthenMode Represents the Authentication mode defined by 802.11. | column | HPN-ICF-DOT11-REF-MIBHpnicfDot11AuthenType | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.4 |
| hpnicfDot11SSIDEncryptionMode Represents the encryption mode for this ESS. | column | HPN-ICF-DOT11-REF-MIBHpnicfDot11SSIDEncryptModeType | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.5 |
| hpnicfDot11WlanInfBindingType Represents the service policy will bind to what kind of
data forwarding interface. | column | OctetString | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.6 |
| hpnicfDot11WlanInfBindingID Represents the interface ID of the interface that ESS will
bind to.
If the value is set to -1, the binding will be removed. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.7 |
| hpnicfDot11SrvPolicyRowStatus The status of this table entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.8 |
| hpnicfDot11ClientMaxCount Represent the maximum number of stations supported by
this service policy. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.9 |