HPN-ICF-DOT11-CFG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
28
Rows
28
Columns
232

hpnicfDot11RadioPolicyTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1 · 1 row entry · 11 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfDot11RadioPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-DOT11-CFG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioPolicyTable' 
The table defines the parameters for radio policy, as per
radio policy of CLI.
One radio policy could be assigned to the different radios (AP).
hpnicfDot11RadioPolicyEntry row .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1
Each entry contains information of each radio policy.
Indexes
Column Syntax OID
hpnicfDot11RadioPolicyName
Represents the name of radio policy.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1.1
hpnicfDot11BeaconInterval
Represents the interval for Beacon management frame.
TUSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1.2
hpnicfDot11DtimInterval
Represents the number of beacon intervals that shall elapse
between transmission of Beacons frames containing a Traffic
Indication Map (TIM) element whose DTIM Count field is 0.
This value is transmitted in the Delivery…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1.3
hpnicfDot11RtsThreshold
Represents the current minimum size, in octets, of the MAC
protocol data unit (MPDU), below which a Request to send/Clear
to send (RTS/CTS) handshake shall not be performed.
byteSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1.4
hpnicfDot11FragThreshold
Represents the current maximum size, in octets, of the MPDU that
may be delivered to the PHY. A MSDU shall be broken into
fragments if its size exceeds the value of this attribute after
adding MAC headers and trailers.
byteSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1.5
hpnicfDot11ShortRetryThreshold
Represents the maximum number of transmission attempts of a
frame, the length of which is less than or equal to
hpnicfDot11RTSThreshold, which shall be made before a failure
condition is indicated.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1.6
hpnicfDot11LongRetryThreshold
Represents the maximum number of transmission attempts of a
frame, the length of which is longer than hpnicfDot11RTSThreshold,
that shall be made before a failure condition is indicated.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1.7
hpnicfDot11MaxRxLifetime
Represents the elapsed time. After the time specified by
hpnicfDot11MaxRxLifetime, the further attempts to reassemble the
MSDU shall be terminated.
millisecondSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1.8
hpnicfDot11RdoPolicyRowStatus
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1.9
hpnicfDot11RdoClientMaxCount
Represent the maximum number of stations supported by
this radio policy.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1.10
hpnicfDot11BeaconIntervalMs
Represents the interval for Beacon management frame.
msSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.1.1.11

hpnicfDot11ServicePolicyTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2 · 1 row entry · 27 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfDot11ServicePolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-DOT11-CFG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-DOT11-CFG-MIB::hpnicfDot11ServicePolicyTable' 
The table defines the parameters for ESS, as per service policy
of CLI.
One service policy could be assigned to the different radios
(AP).
hpnicfDot11ServicePolicyEntry row .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1
Each entry contains information of each service policy.
Indexes
Column Syntax OID
hpnicfDot11ServicePolicyID
Represents the ID of each service policy.
HPN-ICF-DOT11-REF-MIBHpnicfDot11ServicePolicyIDType .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.1
hpnicfDot11SSIDName
Represents the ESS. As per CLI, the value of
service policy name will be SSID.
HPN-ICF-DOT11-REF-MIBHpnicfDot11SSIDStringTyper/w .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.2
hpnicfDot11SSIDHidden
This attribute controls whether the SSID will be advertised in
the beacon frame.
If it is true, then SSID will not be advertised in the beacon
frame.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.3
hpnicfDot11AuthenMode
Represents the Authentication mode defined by 802.11.
HPN-ICF-DOT11-REF-MIBHpnicfDot11AuthenTyper/w
Type Values:
1none
2opensystem
3sharedkey
4all
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.4
hpnicfDot11SSIDEncryptionMode
Represents the encryption mode for this ESS.
HPN-ICF-DOT11-REF-MIBHpnicfDot11SSIDEncryptModeTyper/w
Type Values:
1cleartxt
2cipher
3ext
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.5
hpnicfDot11WlanInfBindingType
Represents the service policy will bind to what kind of
data forwarding interface.
OctetStringr/w .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.6
hpnicfDot11WlanInfBindingID
Represents the interface ID of the interface that ESS will
bind to.
If the value is set to -1, the binding will be removed.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.7
hpnicfDot11SrvPolicyRowStatus
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.8
hpnicfDot11ClientMaxCount
Represent the maximum number of stations supported by
this service policy.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.9
hpnicfDot11SPInCirMode
CIR(committed information rate) mode of inbound direction.
This object is useful only when the corresponding CIR is nonzero.
If value of this object is changed, corresponding CIR will be reset.
HPN-ICF-DOT11-REF-MIBHpnicfDot11CirModer/w
Type Values:
1static
2dynamic
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.10
hpnicfDot11SPInCirValue
Represents the CIR of inbound direction of this service policy.
If the value is 0, it means that no flow control is applied to
the service policy, and the corresponding CIR mode is meaningless.
KbpsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.11
hpnicfDot11SPOutCirMode
CIR(committed information rate) mode of outbound direction.
This object is useful only when the corresponding CIR is nonzero.
If value of this object is changed, corresponding CIR will be reset.
HPN-ICF-DOT11-REF-MIBHpnicfDot11CirModer/w
Type Values:
1static
2dynamic
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.12
hpnicfDot11SPOutCirValue
Represents the CIR of outbound direction of this service policy.
If the value is 0, it means that no flow control is applied to
the service policy, and the corresponding CIR mode is meaningless.
KbpsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.13
hpnicfDot11WlanInfPVID
Represents the VLAN ID of SSID.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.14
hpnicfDot11SPInCirStaticValue
Represents the CIR of inbound direction for static CIR mode.
KbpsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.15
hpnicfDot11SPOutCirStaticValue
Represents the CIR of outbound direction for static CIR mode.
KbpsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.16
hpnicfDot11SPIsolate
If it is true, then stations connected with the service policy are
isolated.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.17
hpnicfDot11WlanexAuthServerIP
Represents the IP address of the Wlanex Authentication server
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.18
hpnicfDot11SPBeaconMeasEnable
If it is true, then beacon-measurement is enabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.19
hpnicfDot11SPBeaconMeasType
Represents what the work mode for BeaconMeasurement type.
The following values are supported:
passive, - BeaconMeasurement will use the passive type.
active - BeaconMeasurement will use the active type.
beac…
Enumerationr/w
Enumerated Values:
1passive
2active
3beaconTable
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.20
hpnicfDot11SPBeaconMeasInterval
Represents the beacon-measurement interval.
secondInteger32r/w
Constraints:
range: 10-200
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.21
hpnicfDot11AuthenModeCM
Represents the Authentication mode defined by 802.11.
Enumerationr/w
Enumerated Values:
0opensystem
1sharedkey
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.22
hpnicfDot11SecIEStatusCM
To enable the security Information element in the beacon and
probe response frames sent by AP.
Enumerationr/w
Enumerated Values:
0none
1wpa
2wpa2
3wlanex
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.23
hpnicfDot11SecurityCiphersCM
The WLAN system support the following cipher type for data frame
encryption.
none
wep40
wep104
tkip
aesccmp
wpi-SMS4
When the value of node equals to zero, it means no configuration or
undo operation.
Enumerationr/w
Enumerated Values:
0none
1wep40
2wep104
3tkip
4aesccmp
5wpisms4
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.24
hpnicfDot11SrvPolicyStatusCM
The status of the Service Policy.
Enumerationr/w
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.25
hpnicfDot11SSIDHiddenCM
This attribute controls whether the SSID will be advertised in
beacon frames.
If it is dot11true, the SSID will not be advertised in beacon
frames.
HPN-ICF-DOT11-REF-MIBHpnicfDot11TruthValueCMr/w
Type Values:
0dot11false
1dot11true
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.26
hpnicfDot11SPIsolateCM
If it is dot11true, the clients connected with the service policy are
isolated to each other.
HPN-ICF-DOT11-REF-MIBHpnicfDot11TruthValueCMr/w
Type Values:
0dot11false
1dot11true
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.27

hpnicfDot11ServicePolicyExtTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.3 · 1 row entry · 7 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfDot11ServicePolicyExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-DOT11-CFG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-DOT11-CFG-MIB::hpnicfDot11ServicePolicyExtTable' 
The table defines the parameters for ESS, as per service policy
of CLI.
When the value of hpnicfDot11SSIDEncryptionMode equals to cipher(2),
more configuration for a ESS will be put into the table.
hpnicfDot11ServicePolicyExtEntry row .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.3.1
Each entry contains information of each service policy under cipher(2)
mode.
Indexes
Column Syntax OID
hpnicfDot11ServicePolicyExtID
Represents the ID of each service policy.
HPN-ICF-DOT11-REF-MIBHpnicfDot11ServicePolicyIDType .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.3.1.1
hpnicfDot11SecIEStatus
To enable the security Information element in the beacon and
probe response frames sent by AP.
HPN-ICF-DOT11-REF-MIBHpnicfDot11SecIEStatusTyper/w
Type Values:
1none
2rsn
3wpa
4all
5ext
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.3.1.2
hpnicfDot11SecurityCiphers
The WLAN system support the following cipher type for data frame
encryption.
wep40(2)
tkip(4)
aesccmp(16)
wep104(32)
wpisms4(64)
wep128(128)
For each service policy, it could support multiple cipher types at
the same ti…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.3.1.3
hpnicfDot11CipherKeyIndex
Represents the key index of cipher key for packet.
When hpnicfDot11SecurityCiphers value is wep40 or wep104,
the configuration will take effective.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.3.1.4
hpnicfDot11CipherKey
Represents the cipher key for packet.
When hpnicfDot11SecurityCiphers value is wep40 or wep104,
the configuration will take effective.
OctetStringr/w .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.3.1.5
hpnicfDot11SrvPolicyExtRowStatus
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.3.1.6
hpnicfDot11CipherKeyType
Represents the cipher key type of hpnicfDot11CipherKey.
Enumerationr/w
Enumerated Values:
1char
2hex
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.3.1.7

hpnicfDot11RadioPolicyExtTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4 · 1 row entry · 10 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfDot11RadioPolicyExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-DOT11-CFG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioPolicyExtTable' 
The table defines the radio policy of each radio.
It can't be modified if the radio policy is a default radio policy.
hpnicfDot11RadioPolicyExtEntry row .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4.1
Each entry contains information of each radio policy.
Indexes
Column Syntax OID
hpnicfDot11RPAPSerialID
This object represents the Serial ID of AP.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4.1.1
hpnicfDot11RPRadioID
This object represents each radio.
HPN-ICF-DOT11-REF-MIBHpnicfDot11RadioScopeType .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4.1.2
hpnicfDot11RPBeaconInterval
This object represents the interval for Beacon management frame.
millisecondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4.1.3
hpnicfDot11RPDtimInterval
This object represents the number of beacon intervals that shall elapse
between transmissions of Beacons frames containing a Traffic
Indication Map (TIM) element whose DTIM count field is 0.
This value is transmitted in…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4.1.4
hpnicfDot11RPRtsThreshold
This object represents the current minimum size, in octets, of the MAC
protocol data unit (MPDU), below which a Request to send/Clear
to send (RTS/CTS) handshake shall not be performed.
byteSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4.1.5
hpnicfDot11RPFragThreshold
This object represents the current maximum size, in octets, of the MPDU
that may be delivered to the PHY. A MSDU shall be broken into
fragments if its size exceeds the value of this attribute after
adding MAC headers a…
byteSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4.1.6
hpnicfDot11RPShortRetryThreshold
This object represents the maximum number of transmission attempts of a
frame, the length of which is less than or equal to
hpnicfDot11RTSThreshold, that shall be made before a failure
condition is indicated.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4.1.7
hpnicfDot11RPLongRetryThreshold
This object represents the maximum number of transmission attempts of a
frame, the length of which is longer than hpnicfDot11RTSThreshold,
and that shall be made before a failure condition is indicated.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4.1.8
hpnicfDot11RPClientMaxCount
This object represents the maximum number of stations supported by
this radio policy.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4.1.9
hpnicfDot11RPBeaconIntervalCM
This object represents beacon interval.
timeunitSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.4.1.10

hpnicfDot11SrvPortSecurityTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.5 · 1 row entry · 6 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfDot11SrvPortSecurityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-DOT11-CFG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SrvPortSecurityTable' 
This table defines the WLAN security status for ESS, BSS and
WLAN-Ethernet interface which binding the crypto service-template.
Otherwise, when binding the clear service-template,
hpnicfPortSecurityTables should be used to configure port security.
hpnicfDot11SrvPortSecurityEntry row .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.5.1
There is a row in this table for service policy.
Indexes
Column Syntax OID
hpnicfDot11SecurityServicePolicyID
Represents the ID of each service policy.
HPN-ICF-DOT11-REF-MIBHpnicfDot11ServicePolicyIDType .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.5.1.1
hpnicfDot11SrvPortSecurityMode
Determines the security modes of the WLAN port.

noRestrictions The default value, no any security mode is set.

userLoginSecureExt Access to the port is denied until the port
client is aut…
Enumerationr/w
Enumerated Values:
1noRestrictions
2userLoginSecureExt
3psk
4macAddressAndPsk
5userLoginSecureExtOrPsk
6ext
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.5.1.2
hpnicfDot11SrvSecurityKeyType
This indicates the key type in the 802.1X EAPOL_Key packet.

userLoginTxKeyTypeNone - This means the key type is not set yet.

userLoginTxKeyTypeDot11Key - This selects the 802.11 key type.…
Enumerationr/w
Enumerated Values:
1userLoginTxKeyTypeNone
2userLoginTxKeyTypeDot11Key
3userLoginTxKeyTypeRsaRC4Key
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.5.1.3
hpnicfDot11SrvSecurityPskKeyMode
This is the password input mode. When input as pskKeyModePassPhrase,
hpnicfDot11SrvSecurityPskKeyString must be 8 to 63 characters;
when input as pskKeyModeRawKey, hpnicfDot11SrvSecurityPskKeyString
must be 64 characte…
Enumerationr/w
Enumerated Values:
1pskKeyModeNone
2pskKeyModePassPhrase
3pskKeyModeRawKey
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.5.1.4
hpnicfDot11SrvSecurityPskKeyString
This is the password string used for psk authentication.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.5.1.5
hpnicfDot11SrvPortSecurityModeCM
Determines the security modes of the WLAN port.

none - The default value, no any security mode is set.

psk - Access to the port is denied until the port client is
authorized (by 802.1X ke…
Enumerationr/w
Enumerated Values:
0none
1psk
2radius
3wlanex
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.5.1.6

hpnicfDot11SrvPolicyExtendTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.6 · 1 row entry · 1 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfDot11SrvPolicyExtendTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-DOT11-CFG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-DOT11-CFG-MIB::hpnicfDot11SrvPolicyExtendTable' 
The table defines the parameters of each service policy.
hpnicfDot11SrvPolicyExtendEntry row .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.6.1
Each entry contains information of each service policy.
Indexes
Column Syntax OID
hpnicfDot11SPEnable
Represents whether the service policy is enabled.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.6.1.1

hpnicfDot11APTemplateTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1 · 1 row entry · 22 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfDot11APTemplateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-DOT11-CFG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APTemplateTable' 
By AP template CLI, administrator will configure the parameters of AP
by convenience.
Before AP boot up and connect to AC by CAPWAP tunnel, administrator
will create AP template for each AP.  When AP connect to AC,
AC will assign configuration to AP by hpnicfDot11APSerialID
information in AP template.
hpnicfDot11APTemplateEntry row .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1
Each entry contains configuration information for each AP.
Indexes
Column Syntax OID
hpnicfDot11APTemplateName
Represents the name of AP template.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.1
hpnicfDot11APSerialID
Represents AP serial id.
OctetStringr/w .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.2
hpnicfDot11TemplateAPModelAlias
Represents the alias of AP model name.
OctetStringr/w .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.3
hpnicfDot11Description
This attribute will give more information about AP.
Administrator could suggest the location, owner or
other information for each AP.
If the value is set to NULL, the description will be removed.
OctetStringr/w .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.4
hpnicfDot11APWorkMode
Represents what work mode for AP.
The following values are supported:
normal - AP will supply WLAN service.
monitor - AP will be a monitor to find attack.
hybrid - AP will supply WLAN service and Device de…
Enumerationr/w
Enumerated Values:
1normal
2monitor
3hybrid
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.5
hpnicfDot11APTemplateRowStatus
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.6
hpnicfDot11APName
Represents the AP name.
OctetStringr/w .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.7
hpnicfDot11StatisInterv
Represents the interval of radio statistic.
secondSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.8
hpnicfDot11APBroadcastProbeReply
Represents enable the AP to reply broadcast probe or not.
'true' : The AP to reply broadcast probe is enabled.
'false': The AP to reply broadcast probe is disabled
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.9
hpnicfDot11StaIdleTimerInterv
Represents the interval for which the link between AP and STA
( power-save or awake ) can be idle.
secondSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.10
hpnicfDot11StaKeepAliveTimerInterv
Represents the interval of the keep alive requests sent between
AP and STA.
secondSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.11
hpnicfDot11APCir
Represents the committed information rate between AP and AC.
KbpsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.12
hpnicfDot11APCbs
Represents the committed burst size between AP and AC.
BytesSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.13
hpnicfDot11APPriorityLevel
This object represents the connection priority for the AP.
If the connection priority is 7, the AC is considered as the
primary AC for the AP.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.14
hpnicfDot11APElementID
This object represents the AP element ID.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.15
hpnicfDot11APDevDetectEnable
Represents whether device detection is enabled or not.
'true' : Device detection is enabled.
'false': Device detection is disabled.
If device detection is enabled, the AP will provide both device
detection and WLAN data…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.16
hpnicfDot11APGetIPMethod
This object represents the method how AP gets IP address.
Enumerationr/w
Enumerated Values:
1dhcpAlloc
2static
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.17
hpnicfDot11StatisIntervMode
This object represents the mode of statics interval.
normal - statics interval value between 10s to 120s
realtime - statics interval value between 2s to 5s
Enumerationr/w
Enumerated Values:
1normal
2realtime
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.18
hpnicfDot11ApTrapEnabled
Represents whether the trap status is enabled or not.
'true' : Enable the trap status;
'false' : Disable the trap status.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.19
hpnicfDot11ApFmwUpdState
Represents the status of version auto-update for an AP.
The following values are supported:
enable - AP version will be updated automatically.
disable - AP version will not be updated automatically.
inherit - The st…
Enumerationr/w
Enumerated Values:
1enable
2disable
3inherit
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.20
hpnicfDot11StatisIntervModeCM
This object represents the mode of statistic interval.
off - statistic interval value between 10s to 120s
on - statistic interval value between 2s to 5s
Enumerationr/w
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.21
hpnicfDot11ApNasIDCM
Represents the NAS-ID of current service policy for each
specific radio of AP.
OctetStringr/w .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.1.1.22

hpnicfDot11RadioToConfigTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2 · 1 row entry · 21 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfDot11RadioToConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-DOT11-CFG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioToConfigTable' 
Before AP connects to AC, administrator will configure radio
parameter to each radio.
hpnicfDot11RadioToConfigEntry row .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1
Each entry contains configuration information for each radio.
Indexes
Column Syntax OID
hpnicfDot11APTemplateNameCfg
Represents the name of AP template.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.1
hpnicfDot11CfgRadioID
Represents each radio.
HPN-ICF-DOT11-REF-MIBHpnicfDot11RadioScopeType .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.2
hpnicfDot11CfgRadioPolicyName
Represents the name of radio policy.
OctetStringr/w .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.3
hpnicfDot11CfgRadioType
Represents the radio will work with which 802.11 radio type.
HPN-ICF-DOT11-REF-MIBHpnicfDot11RadioTyper/w
Type Values:
1dot11a
2dot11b
4dot11g
8dot11n
16dot11gn
32dot11an
64dot11ac
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.4
hpnicfDot11CfgChannel
Represents the channel allocation of radio.
HPN-ICF-DOT11-REF-MIBHpnicfDot11ChannelScopeTyper/w .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.5
hpnicfDot11CfgMaxTxPowerLevel
Represents the maximal transmit power scope for AP.
dbmHPN-ICF-DOT11-REF-MIBHpnicfDot11TxPwrLevelScopeTyper/w .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.6
hpnicfDot11PreambleLen
Represents whether use long or short preamble for 802.11 MAC
frame.
When hpnicfDot11CfgRadioType is either dot11b or dot11g,
then value for hpnicfDot11PreambleLen will be valid.
Otherwise, the value for it will be inval…
HPN-ICF-DOT11-REF-MIBHpnicfDot11PreambleTyper/w
Type Values:
1long
2short
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.7
hpnicfDot11CfgRadioStatus
Represents the radio admin status whether is enabled
or disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.8
hpnicfDot11CfgRdElementID
Represents the element ID of this radio. It comprises two parts.
The highest 24 bits are AP element ID and the lowest 8 bits are
radio ID.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.9
hpnicfDot11CfgWorkMode
Represents work mode of the radio.
HPN-ICF-DOT11-REF-MIBHpnicfDot11WorkModer/w
Type Values:
1normal
2monitor
3hybrid
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.10
hpnicfDot11CfgPwrAttValue
Represents the value of power attenuation.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.11
hpnicfDot11RadioTxArithmetic
Represents the transmission arithmetic of the radio.
The following values are supported:
quality - Consider the quality first during the transmission.
bandwidth - Consider the bandwidth first during the transmission.
Enumerationr/w
Enumerated Values:
1quality
2bandwidth
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.12
hpnicfDot11CfgChannelLockStat
Represents locked status of channel on the radio.
Enumerationr/w
Enumerated Values:
1unlocked
2locked
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.13
hpnicfDot11CfgPowerLockStat
Represents locked status of power on the radio.
Enumerationr/w
Enumerated Values:
1unlocked
2locked
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.14
hpnicfDot11CfgLBRdGroupId
Represents the load balance group ID allocated for the radio.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.15
hpnicfDot11CfgRRMSDRdGroupId
Represents the RRM self-decisive group ID allocated for the radio.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.16
hpnicfDot11CfgRadioType2
Represents the radio will work with which 802.11 radio type.
HPN-ICF-DOT11-REF-MIBHpnicfDot11RadioType2r/w
Type Values:
1dot11a
2dot11b
4dot11g
8dot11an
16dot11gn
32dot11ac
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.17
hpnicfDot11CfgIDSEnable
Represents whether intrusion detection is enabled for this radio.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.18
hpnicfDot11CfgSaEnable
Represents whether spectrum analysis is enabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.19
hpnicfDot11CfgSaCltRtFFTData
Represents whether to collect real-time FFT data for this radio.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.20
hpnicfDot11CfgSaBand
Represents which band of channels will be monitored when collection
real-time FFT data is enabled for this radio. Detection of
interference devices and air quality will also be affected. Each band
responds to the foll…
Enumerationr/w
Enumerated Values:
1dot11g
2dot11aLower
3dot11aMiddle
4dot11aUpper
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.2.1.21

hpnicfDot11APServiceSetTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.3 · 1 row entry · 3 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfDot11APServiceSetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-DOT11-CFG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APServiceSetTable' 
For each radio, it could configure multiple service policies.
The table describes the relationship between radio and
service policies.
hpnicfDot11APServiceSetEntry row .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.3.1
Each entry contains service policy information for each
specific radio of AP.
Indexes
Column Syntax OID
hpnicfDot11CfgServicePolicyID
Represents the ID of each service policy used by the AP.
HPN-ICF-DOT11-REF-MIBHpnicfDot11ServicePolicyIDType .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.3.1.1
hpnicfDot11SrvSetRowStatus
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.3.1.2
hpnicfDot11ServiceSetVlanId
Represents the Vlan ID of BSS which is generated when service policy
is binded with the Radio.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.3.1.3

hpnicfDot11APSysInfoSetTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.4 · 1 row entry · 3 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfDot11APSysInfoSetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-DOT11-CFG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APSysInfoSetTable' 
The table of the system information for each AP.
hpnicfDot11APSysInfoSetEntry row .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.4.1
The system information configuration for each AP.
Indexes
Column Syntax OID
hpnicfDot11APSysNetID
Represents the system Net ID for AP.
OctetStringr/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.4.1.1
hpnicfDot11APCpuUsageThreshold
The CPU usage threshold for AP.
onepercentInteger32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.4.1.2
hpnicfDot11APMemUsageThreshold
The memory usage threshold for AP.
onepercentInteger32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.4.1.3

hpnicfDot11APLimitTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.5 · 1 row entry · 3 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfDot11APLimitTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-DOT11-CFG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APLimitTable' 
For each connected APs, administrator could configure a series of
limits.  This table describes the limit information for AP(s).
hpnicfDot11APLimitEntry row .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.5.1
Each entry contains the limit information for each AP.
Indexes
Column Syntax OID
hpnicfDot11APSsidNumLimit
Represents the upper limit of service template binded
with this AP. All radios of AP share this limit.
Default value 0 : There is no upper limit of service template
binded with this AP.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.5.1.1
hpnicfDot11APUserCntLimit
Represents the upper limit of user which has access to this AP.
All BSSs binded with AP share this limit.
Default value 0 : There is no upper limit of user which has access
to this AP.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.5.1.2
hpnicfDot11APUserThreshold
Represents the threshold of user which has access to this
AP. All BSSs binded with AP share this limit. If the user counter
is overflow, the trap will be sent.
Default value 0 : There is no threshold of user which has…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.5.1.3

hpnicfDot11APIfSetTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.6 · 1 row entry · 2 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfDot11APIfSetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-DOT11-CFG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APIfSetTable' 
The table of the interface information for each AP.
hpnicfDot11APIfSetEntry row .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.6.1
The interface information configuration for each AP.
Indexes
Column Syntax OID
hpnicfDot11APSetIfIndex
Represents the index for a interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.6.1.1
hpnicfDot11APIfAlias
This object is an 'alias' name for the interface as specified
by a network manager for AP.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.6.1.2

hpnicfDot11APServiceVlanTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.7 · 1 row entry · 4 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfDot11APServiceVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-DOT11-CFG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APServiceVlanTable' 
For all the radios on the AP, it could configure multiple service policies.
The table describes the relationship between AP and
service policies.
hpnicfDot11APServiceVlanEntry row .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.7.1
Each entry contains service policy information for each AP.
Indexes
Column Syntax OID
hpnicfDot11APServiceVlanSerialID
This object represents AP serial id.
OctetString .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.7.1.1
hpnicfDot11APServiceVlanSPID
This object represents the ID of each service policy used by the AP.
HPN-ICF-DOT11-REF-MIBHpnicfDot11ServicePolicyIDType .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.7.1.2
hpnicfDot11APServiceVlanId
This object represents the VLAN ID of BSS which is generated when the
service policy is bound to the radio.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.7.1.3
hpnicfDot11APServiceVlanRowStatus
This object represents the status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.7.1.4

hpnicfDot11RadioConfigTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8 · 1 row entry · 19 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfDot11RadioConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-DOT11-CFG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioConfigTable' 
Before AP connects to AC, administrator will configure radio
parameter to each radio.
hpnicfDot11RadioConfigEntry row .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1
Each entry contains configuration information for each radio.
Indexes
Column Syntax OID
hpnicfDot11RCAPSerialID
This object represents the Serial ID of AP.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.1
hpnicfDot11RCRadioID
This object represents each radio.
HPN-ICF-DOT11-REF-MIBHpnicfDot11RadioScopeType .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.2
hpnicfDot11RCRadioType
This object represents the radio will work with which 802.11 radio
type.
HPN-ICF-DOT11-REF-MIBHpnicfDot11RadioTyper/w
Type Values:
1dot11a
2dot11b
4dot11g
8dot11n
16dot11gn
32dot11an
64dot11ac
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.3
hpnicfDot11RCChannel
This object represents the channel allocation of radio.
HPN-ICF-DOT11-REF-MIBHpnicfDot11ChannelScopeTyper/w .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.4
hpnicfDot11RCPreambleLen
This object represents whether use long or short preamble for 802.11
MAC frame.
When hpnicfDot11CfgRadioType is either dot11b or dot11g,
then value for hpnicfDot11PreambleLen will be valid.
Otherwise, the value for it w…
HPN-ICF-DOT11-REF-MIBHpnicfDot11PreambleTyper/w
Type Values:
1long
2short
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.5
hpnicfDot11RCPwrAttValue
This object represents the value of power attenuation.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.6
hpnicfDot11RCApPowerLevel
Represents the maximal transmit power scope for AP.
dbmHPN-ICF-DOT11-REF-MIBHpnicfDot11TxPwrLevelScopeTyper/w .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.7
hpnicfDot11RCDynamicChlState
Enable/Disable dynamic channel selection.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.8
hpnicfDot11RCDynamicPowerState
Enable/Disable dynamic power selection for the band.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.9
hpnicfDot11RCRadioStatus
Represents the radio admin status whether is enabled
or disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.10
hpnicfDot11RCRadioRate
Set data transmit rates for the radio, in the format of 1,2,5.5...
For 802.11n radios, the format can be MCS X. The data transmit rates
between AP and STA must fall into the configured rates.
(Note: For 802.11n radios,…
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.11
hpnicfDot11RCPwrAdjustStepLength
Power adjustment step-length in dBm.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.12
hpnicfDot11RCRadioType2
This object represents the radio will work with which 802.11 radio
type.
HPN-ICF-DOT11-REF-MIBHpnicfDot11RadioType2r/w
Type Values:
1dot11a
2dot11b
4dot11g
8dot11an
16dot11gn
32dot11ac
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.13
hpnicfDot11RCPreambleLenCM
This object represents whether use long or short preamble for 802.11
MAC frame.
When hpnicfDot11CfgRadioType is either dot11b or dot11g,
then value for hpnicfDot11PreambleLenCM will be valid.
Otherwise, the value for it…
Enumerationr/w
Enumerated Values:
0long
1short
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.14
hpnicfDot11RCDynamicChlStateCM
Enable/Disable dynamic channel selection.
Enumerationr/w
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.15
hpnicfDot11RCRadioStatusCM
Represents the radio admin status whether is enabled
or disabled.
Enumerationr/w
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.16
hpnicfDot11RCRadioRateCM
Set data transmit rates for the radio, in the format of 1,2,5.5...
For 802.11n radios, the format of each value can be MCS X. The data transmit
rates between AP and client should be one of the configured rates.
(Note: …
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.17
hpnicfDot11RCDynamicPowerStateCM
Enable/disable dynamic power selection for the band.
HPN-ICF-DOT11-REF-MIBHpnicfDot11TruthValueCMr/w
Type Values:
0dot11false
1dot11true
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.18
hpnicfDot11RCRssiThresholdCM
Represents the minimum value of the RSSI.
The clients with RSSI below this value will be refused to associate.
dBmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.19

hpnicfDot11RadioSSIDCfgTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.9 · 1 row entry · 6 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfDot11RadioSSIDCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-DOT11-CFG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioSSIDCfgTable' 
For each radio, it could configure multiple service policies.
The table describes the relationship between radio and
service policies.
hpnicfDot11RadioSSIDCfgEntry row .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.9.1
Each entry contains SSID configuration information for each radio.
Indexes
Column Syntax OID
hpnicfDot11RadioSSIDSerialID
This object represents the serial ID of AP.
HPN-ICF-DOT11-REF-MIBHpnicfDot11ObjectIDType
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.9.1.1
hpnicfDot11RadioSSIDRadioID
This object represents each radio.
HPN-ICF-DOT11-REF-MIBHpnicfDot11RadioScopeType .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.9.1.2
hpnicfDot11RadioSSIDWLANID
This object represents the WLAN ID of the BSSID.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.9.1.3
hpnicfDot11RadioSSIDIndex
This object represents the ID of each service policy used by the
radio.
HPN-ICF-DOT11-REF-MIBHpnicfDot11ServicePolicyIDTyper/w .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.9.1.4
hpnicfDot11RadioBSSID
As MAC address format, it is used to identify BSS.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.9.1.5
hpnicfDot11RadioSSIDRowStatus
RowStatus.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.9.1.6

hpnicfDot11APSerialIDTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10 · 1 row entry · 19 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfDot11APSerialIDTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-DOT11-CFG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APSerialIDTable' 
The table will provide the general information about APs.
hpnicfDot11APSerialIDEntry row .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1
Each entry contains the general information of an AP.
Indexes
Column Syntax OID
hpnicfDot11SIDAPSerialID
Represents AP serial id.
OctetString .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.1
hpnicfDot11SIDAPWorkMode
Represents what work mode for AP.
The following values are supported:
normal - AP will supply WLAN service.
monitor - AP will be a monitor to find attack.
hybrid - AP will supply WLAN service and Device detection i…
Enumerationr/w
Enumerated Values:
1normal
2monitor
3hybrid
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.2
hpnicfDot11SIDAPGetIPMethod
This object represents the method how AP gets IP address.
Enumerationr/w
Enumerated Values:
1dhcpAlloc
2static
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.3
hpnicfDot11SIDAPTemplateName
Represents the name of AP template.
OctetStringr/w .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.4
hpnicfDot11SIDModelAlias
Represents the alias of AP model name.
OctetStringr/w .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.5
hpnicfDot11SIDAPDescription
This attribute will give more information about AP.
Administrator could suggest the location, owner or
other information for each AP.
If the value is set to NULL, the description will be removed.
OctetStringr/w .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.6
hpnicfDot11SIDRowStatus
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.7
hpnicfDot11SIDAPName
Represents the AP name.
OctetStringr/w .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.8
hpnicfDot11SIDStatisInterv
Represents the interval of radio statistic.
secondSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.9
hpnicfDot11SIDAPBroadcastProbeReply
Represents enable the AP to reply broadcast probe or not.
'true' : The AP to reply broadcast probe is enabled.
'false': The AP to reply broadcast probe is disabled
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.10
hpnicfDot11SIDAPStaIdleTimerInterv
Represents the interval for which the link between AP and STA
( power-save or awake ) can be idle.
secondSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.11
hpnicfDot11SIDStaKeepAliveTimerInterv
Represents the interval of the keep alive requests sent between
AP and STA.
secondSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.12
hpnicfDot11SIDAPCir
Represents the committed information rate between AP and AC.
KbpsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.13
hpnicfDot11SIDAPCbs
Represents the committed burst size between AP and AC.
BytesSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.14
hpnicfDot11SIDAPPriorityLevel
This object represents the connection priority for the AP.
If the connection priority is 7, the AC is considered as the
primary AC for the AP.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.15
hpnicfDot11SIDAPElementID
This object represents the AP element ID.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.16
hpnicfDot11SIDAPDevDetectEnable
Represents whether device detection is enabled or not.
'true' : Device detection is enabled.
'false': Device detection is disabled.
If device detection is enabled, the AP will provide both device
detection and WLAN data…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.17
hpnicfDot11SIDAPStatisIntervMode
This object represents the mode of statics interval.
normal - statics interval value between 10s to 120s
realtime - statics interval value between 2s to 5s
Enumerationr/w
Enumerated Values:
1normal
2realtime
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.18
hpnicfDot11SIDAPWorkModeCM
Represents what work mode for AP.
The following values are supported:
normal - AP will supply WLAN service.
monitor - AP will be a monitor to find attack.
SemiMonitor - AP will supply WLAN service and Device detect…
Enumerationr/w
Enumerated Values:
0normal
1monitor
2semimonitor
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.10.1.19

hpnicfDot11APSTVlanTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.11 · 1 row entry · 4 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfDot11APSTVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-DOT11-CFG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-DOT11-CFG-MIB::hpnicfDot11APSTVlanTable' 
For each service policy, it could be bind to several VLANs.
The table describes the relationship between VLAN and
service policies.
hpnicfDot11APSTVlanEntry row .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.11.1
Each entry contains VLAN and service policy information for each
specific radio of AP.
Indexes
Column Syntax OID
hpnicfDot11CfgSTVLANID
Represents the VLAN that current Service Policy have bind to.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.11.1.1
hpnicfDot11CfgSTNASPortID
Represents the NAS Port ID of current Service Policy for each
specific radio of AP.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.11.1.2
hpnicfDot11CfgServiceSetRowStatus
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.11.1.3
hpnicfDot11CfgSTNASID
Represents the NAS ID of current Service Policy for each
specific radio of AP.
OctetString
Constraints:
range: 0-127
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.11.1.4

hpnicfDot11RadioIntfConfigTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1 · 1 row entry · 16 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfDot11RadioIntfConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-DOT11-CFG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioIntfConfigTable' 
The table defines the parameters for radio in AP, as per
radio.
hpnicfDot11RadioIntfConfigEntry row .1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1
Each entry contains information of each radio in AP.
Indexes
Column Syntax OID
hpnicfDot11RadioIfIdx
Represents the Radio IfIndex of radio in AP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.1
hpnicfDot11RadioCfgBeaconIntvl
Represents the interval for Beacon management frame.
TUSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.2
hpnicfDot11RadioCfgDtimIntvl
Represents the number of beacon intervals that shall elapse
between transmission of Beacons frames containing a Traffic
Indication Map (TIM) element whose DTIM Count field is 0.
This value is transmitted in the Delivery…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.3
hpnicfDot11RadioCfgRtsThreshold
Represents the current minimum size,in octets,of the MAC
protocol data unit (MPDU), below which a Request to send/Clear
to send (RTS/CTS) handshake shall not be performed.
ByteSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.4
hpnicfDot11RadioCfgFragThreshold
Represents the current maximum size, in octets, of the MPDU that
may be delivered to the PHY. A MSDU shall be broken into
fragments if its size exceeds the value of this attribute after
adding MAC headers and trailers.
ByteSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.5
hpnicfDot11RadioCfgShtRetryThld
Represents the maximum number of transmission attempts of a
frame, the length of which is less than or equal to
hpnicfDot11RadioRTSThreshold, that shall be made before a failure
condition is indicated.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.6
hpnicfDot11RadioCfglongRtrThld
Represents the maximum number of transmission attempts of a
frame, the length of which is longer than
hpnicfDot11RadioRTSThreshold, that shall be made before a
failure condition is indicated.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.7
hpnicfDot11RadioCfgMaxRxLifetime
Represents the elapsed time. After the time specified by
hpnicfDot11RadioCfgMaxRxLifetime, the further attempts to reassemble
the MSDU shall be terminated.
millisecondSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.8
hpnicfDot11RadioCfgType
Represents the radio will work with which 802.11 radio type.
HPN-ICF-DOT11-REF-MIBHpnicfDot11RadioTyper/w
Type Values:
1dot11a
2dot11b
4dot11g
8dot11n
16dot11gn
32dot11an
64dot11ac
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.9
hpnicfDot11RadioCfgChannel
Represents the channel allocation of radio.
HPN-ICF-DOT11-REF-MIBHpnicfDot11ChannelScopeTyper/w .1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.10
hpnicfDot11RadioCfgMaxTxPwrLvl
Represents the maximal transmit power scope for AP.
dbmHPN-ICF-DOT11-REF-MIBHpnicfDot11TxPwrLevelScopeTyper/w .1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.11
hpnicfDot11RadioCfgPreambleLen
Represents whether use long or short preamble for 802.11 MAC
frame.
HPN-ICF-DOT11-REF-MIBHpnicfDot11PreambleTyper/w
Type Values:
1long
2short
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.12
hpnicfDot11RadioCfgWorkMode
Represents work mode of the radio.
HPN-ICF-DOT11-REF-MIBHpnicfDot11WorkModer/w
Type Values:
1normal
2monitor
3hybrid
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.13
hpnicfDot11RadioCfgOnly11gEnable
Represents whether enable only 802.11g radio mode or not.
'true' : Only 802.11g radio mode is enabled.
'false': Only 802.11g radio mode is disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.14
hpnicfDot11RadioCfgType2
Represents the radio will work with which 802.11 radio type.
HPN-ICF-DOT11-REF-MIBHpnicfDot11RadioType2r/w
Type Values:
1dot11a
2dot11b
4dot11g
8dot11an
16dot11gn
32dot11ac
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.15
hpnicfDot11RadioCfgRssithresholdCM
Represents the minimum value of the RSSI.
The clients with RSSI below this value will be refused to associate.
dBmSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.1.1.16

hpnicfDot11RadioIntfBindTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.2 · 1 row entry · 3 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfDot11RadioIntfBindTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-DOT11-CFG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioIntfBindTable' 
The table defines the binding information for each radio in AP.
hpnicfDot11RadioIntfBindEntry row .1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.2.1
Each entry contains the radio interface binding information
in AP.
Indexes
Column Syntax OID
hpnicfDot11RadioIntfBindSvcPlcyID
Represents the ID of each service policy.
HPN-ICF-DOT11-REF-MIBHpnicfDot11ServicePolicyIDType .1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.2.1.1
hpnicfDot11RadioIntfBindIfIdx
Represents the Ifindex of interface which is binded to
the radio.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.2.1.2
hpnicfDot11RadioIntfBindRowStatus
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.4.2.1.3

hpnicfDot11DataRateConfigTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.5.1 · 1 row entry · 5 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfDot11DataRateConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-DOT11-CFG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-DOT11-CFG-MIB::hpnicfDot11DataRateConfigTable' 
Table will provide data rate configuration for a specific radio type.
hpnicfDot11DataRateConfigEntry row .1.3.6.1.4.1.11.2.14.11.15.2.75.4.5.1.1
Each entry of the table will provide data rate configuration for a
specific radio type.
Indexes
Column Syntax OID
hpnicfDot11RadioTypeID
Represents the radio type.
HPN-ICF-DOT11-REF-MIBHpnicfDot11RadioType
Type Values:
1dot11a
2dot11b
4dot11g
8dot11n
16dot11gn
32dot11an
64dot11ac
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.5.1.1.1
hpnicfDot11SupportedRateSet
Represents the supported rate set of a particular radio type.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.5.1.1.2
hpnicfDot11MandatoryRateSet
Represents the mandatory rate set of a particular radio type.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.5.1.1.3
hpnicfDot11DisabledRateSet
Represents the disabled rate set of a particular radio type.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.5.1.1.4
hpnicfDot11SmartRateSet
Represents the rate set of a particular radio type.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.5.1.1.5

hpnicfDot11WlanEssIfTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.1 · 1 row entry · 3 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfDot11WlanEssIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-DOT11-CFG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-DOT11-CFG-MIB::hpnicfDot11WlanEssIfTable' 
This table is used to configure WLAN ESS interface.
hpnicfDot11WlanEssIfEntry row .1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.1.1
Each entry contains the WLAN ESS interface configuration.
Indexes
Column Syntax OID
hpnicfDot11WlanEssIfNumber
This node represents the WLAN ESS interface number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.1.1.1
hpnicfDot11WlanEssIfIndex
This node represents the ifIndex of WLAN-ESS interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.1.1.2
hpnicfDot11WlanEssRowStatus
This node represents the WLAN ESS interface row status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.1.1.3

hpnicfDot11WlanBssIfTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.2 · 1 row entry · 3 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfDot11WlanBssIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-DOT11-CFG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-DOT11-CFG-MIB::hpnicfDot11WlanBssIfTable' 
This table is used to configure WLAN BSS interface.
hpnicfDot11WlanBssIfEntry row .1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.2.1
Each entry contains the WLAN BSS interface configuration.
Indexes
Column Syntax OID
hpnicfDot11WlanBssIfNumber
This node represents the WLAN BSS interface number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.2.1.1
hpnicfDot11WlanBssIfIndex
This node represents the ifIndex of WLAN-BSS interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.2.1.2
hpnicfDot11WlanBssRowStatus
This node represents the WLAN BSS interface row status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.2.1.3

hpnicfDot11WLANEthernetIfTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.3 · 1 row entry · 3 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfDot11WLANEthernetIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-DOT11-CFG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-DOT11-CFG-MIB::hpnicfDot11WLANEthernetIfTable' 
This table is used to configure WLAN Ethernet interface.
hpnicfDot11WLANEthernetIfEntry row .1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.3.1
Each entry contains the WLAN Ethernet interface configuration.
Indexes
Column Syntax OID
hpnicfDot11WlanEthernetIfNumber
This node represents the WLAN Ethernet interface number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.3.1.1
hpnicfDot11WLANEthernetIfIndex
This node represents the ifIndex of WLAN-Ethernet interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.3.1.2
hpnicfDot11WlanEthernetRowStatus
This node represents the Wlan Ethernet interface row status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.3.1.3

hpnicfDot11PortSecurityTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.4 · 1 row entry · 4 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfDot11PortSecurityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-DOT11-CFG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-DOT11-CFG-MIB::hpnicfDot11PortSecurityTable' 
This table defines the WLAN security status for ESS, BSS, mesh and
WLAN-Ethernet interface which binding the crypto service-template.
Otherwise, when binding the clear service-template,
hpnicfPortSecurityTables should be used to configure port security.
hpnicfDot11PortSecurityEntry row .1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.4.1
There is a row in this table for each ESS, BSS and WLAN-Ethernet
interface.It is indexed using the object ifIndex in RFC1213-MIB.
Indexes
Column Syntax OID
hpnicfDot11PortSecurityMode
Determines the security modes of the WLAN port.

noRestrictions - The default value,no any security mode is set.

userLoginSecureExt - Access to the port is denied until the port
client is …
Enumerationr/w
Enumerated Values:
1noRestrictions
2userLoginSecureExt
3psk
4macAddressAndPsk
5userLoginSecureExtOrPsk
6ext
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.4.1.1
hpnicfDot11SecurityUserLoginTxKeyType
This indicates the key type in the 802.1X EAPOL_Key packet.

userLoginTxKeyTypeNone - This means the key type is not set yet.

userLoginTxKeyTypeDot11Key - This selects the 802.11 key type.…
Enumerationr/w
Enumerated Values:
1userLoginTxKeyTypeNone
2userLoginTxKeyTypeDot11Key
3userLoginTxKeyTypeRsaRC4Key
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.4.1.2
hpnicfDot11SecurityPskKeyMode
This is the password input mode. When input as pskKeyModePassPhrase,
hpnicfDot11SecurePskKeyString must be 8 to 63 characters; when input as
pskKeyModeRawKey, hpnicfDot11SecurePskKeyString must be 64 characters and
eac…
Enumerationr/w
Enumerated Values:
1pskKeyModeNone
2pskKeyModePassPhrase
3pskKeyModeRawKey
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.4.1.3
hpnicfDot11SecurityPskKeyString
This is the password string used for psk authentication.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.4.1.4

hpnicfDot11WlanMeshIfTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.5 · 1 row entry · 3 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfDot11WlanMeshIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-DOT11-CFG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-DOT11-CFG-MIB::hpnicfDot11WlanMeshIfTable' 
This table is used to configure WLAN mesh interface.
hpnicfDot11WlanMeshIfEntry row .1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.5.1
Each entry contains the WLAN mesh interface configuration.
Indexes
Column Syntax OID
hpnicfDot11WlanMeshIfNumber
This node represents the WLAN mesh interface number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.5.1.1
hpnicfDot11WlanMeshIfIndex
This node represents the index of WLAN mesh interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.5.1.2
hpnicfDot11WlanMeshRowStatus
This node represents the WLAN mesh interface row status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.6.5.1.3

hpnicfDot11nRadioCfgTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.1 · 1 row entry · 7 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfDot11nRadioCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-DOT11-CFG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-DOT11-CFG-MIB::hpnicfDot11nRadioCfgTable' 
This table is used to configure dot11n on the radio.
hpnicfDot11nRadioCfgEntry row .1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.1.1
This entry contains the dot11n configuration on the radio.
Indexes
Column Syntax OID
hpnicfDot11nRadioCfgIndex
Represents index of the radio.
HPN-ICF-DOT11-REF-MIBHpnicfDot11RadioElementIndex .1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.1.1.1
hpnicfDot11nAMpduEnable
Enable the function of A-MPDU.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.1.1.2
hpnicfDot11nAMsduEnable
Enable the function of A-MSDU.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.1.1.3
hpnicfDot11nClientDot11nOnly
If radio type is 802.11an or 802.11gn, only permit clients of 11n mode.
If radio type is 802.11ac, permit clients of 11n and 11ac mode.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.1.1.4
hpnicfDot11nChanelBand
Specify the bandwidth mode.
Enumerationr/w
Enumerated Values:
1mode20
2mode40
3mode80
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.1.1.5
hpnicfDot11nShortGiEnable
The function of Short GI.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.1.1.6
hpnicfDot11nClientDot11acOnly
Only permit clients of 11ac mode.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.1.1.7

hpnicfDot11RadioWDSTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.2 · 1 row entry · 5 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfDot11RadioWDSTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-DOT11-CFG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-DOT11-CFG-MIB::hpnicfDot11RadioWDSTable' 
This table is used to configure WDS on the radio.
hpnicfDot11RadioWDSEntry row .1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.2.1
Each entry contains the WDS configuration on the radio.
Indexes
Column Syntax OID
hpnicfDot11RadioWDSIndex
Represents the element index of radio.
HPN-ICF-DOT11-REF-MIBHpnicfDot11RadioElementIndex .1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.2.1.1
hpnicfDot11RadioWDSMode
Represents enable the WDS mode or not.
nowds: The WDS mode is disabled.
wds : The WDS mode is enabled
Enumerationr/w
Enumerated Values:
1nowds
2wds
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.2.1.2
hpnicfDot11RadioWDSNetWorkID
Represents the mesh ID of WDS.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.2.1.3
hpnicfDot11WDSSecPskKeyMode
Represents the PSK mode of WDS.
Enumerationr/w
Enumerated Values:
1pskKeyModeNone
2pskKeyModePassPhrase
3pskKeyModeRawKey
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.2.1.4
hpnicfDot11WDSSecPskKeyString
Represents the PSK value of WDS.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.2.1.5

hpnicfDot11nRadioCfg2Table

table
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3 · 1 row entry · 12 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfDot11nRadioCfg2Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-DOT11-CFG-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-DOT11-CFG-MIB::hpnicfDot11nRadioCfg2Table' 
This table is used to configure dot11n on the radio.
hpnicfDot11nRadioCfg2Entry row .1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1
This entry contains the dot11n configuration on the radio.
Indexes
Column Syntax OID
hpnicfDot11nRadioCfg2APIDIndex
Represents index of the AP.
HPN-ICF-DOT11-REF-MIBHpnicfDot11ObjectIDType
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.1
hpnicfDot11nRadioCfg2RadioIDIndex
Represents index of the radio.
HPN-ICF-DOT11-REF-MIBHpnicfDot11RadioScopeType .1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.2
hpnicfDot11nRadioCfg2AMpduEnable
Enable the function of A-MPDU.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.3
hpnicfDot11nRadioCfg2AMsduEnable
Enable the function of A-MSDU.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.4
hpnicfDot11nRadioCfg2ClientDot11nOnly
If radio type is 802.11an or 802.11gn, only permit clients of 11n mode.
If radio type is 802.11ac, permit clients of 11n and 11ac mode.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.5
hpnicfDot11nRadioCfg2ChannelBand
Specify the bandwidth mode.
Enumerationr/w
Enumerated Values:
1mode20
2mode40
3mode80
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.6
hpnicfDot11nRadioCfg2ShortGiEnable
Enable the function of Short GI.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.7
hpnicfDot11nRadioCfg2AMpduEnableCM
Enable the function of A-MPDU.
Enumerationr/w
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.8
hpnicfDot11nRadioCfg2ChannelBandCM
Specify the bandwidth mode.
Enumerationr/w
Enumerated Values:
1mode40
2mode20
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.9
hpnicfDot11nRadioCfg2ShortGiEnableCM
Enable the function of Short GI.
Enumerationr/w
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.10
hpnicfDot11nRadioCfg2ClientDot11acOnly
Only permit clients of 11ac mode.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.11
hpnicfDot11nRadioCfg2ClientDot11nOnlyCM
If radio type is 802.11an or 802.11gn, permit only clients of 11n mode.
If radio type is 802.11ac, permit clients of both 11n and 11ac mode.
HPN-ICF-DOT11-REF-MIBHpnicfDot11TruthValueCMr/w
Type Values:
0dot11false
1dot11true
 .1.3.6.1.4.1.11.2.14.11.15.2.75.4.8.3.1.12