hpnicfDot11SPOutCirMode

HPN-ICF-DOT11-CFG-MIB · .1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.12
MIB view Table view

Object

column r/w HPN-ICF-DOT11-REF-MIBHpnicfDot11CirMode 
CIR(committed information rate) mode of outbound direction.
This object is useful only when the corresponding CIR is nonzero.
If value of this object is changed, corresponding CIR will be reset.

Context

MIB
HPN-ICF-DOT11-CFG-MIB
OID
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.12
Type
column
Access
readwrite
Status
current
Parent
hpnicfDot11ServicePolicyEntry
Table
hpnicfDot11ServicePolicyTable
Siblings
26

Syntax

HPN-ICF-DOT11-REF-MIBHpnicfDot11CirMode
Source
HPN-ICF-DOT11-REF-MIBHpnicfDot11CirMode
Base type
Enumeration

Values & Constraints

Type Values
1static
2dynamic

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hpnicfDot11ServicePolicyID
Represents the ID of each service policy.
columnHPN-ICF-DOT11-REF-MIBHpnicfDot11ServicePolicyIDType.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.1
hpnicfDot11SPInCirMode
CIR(committed information rate) mode of inbound direction. This object is useful only when the corresponding CIR is nonzero. If value of this object is changed, corresponding CIR …
columnHPN-ICF-DOT11-REF-MIBHpnicfDot11CirMode.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.10
hpnicfDot11SPInCirValue
Represents the CIR of inbound direction of this service policy. If the value is 0, it means that no flow control is applied to the service policy, and the corresponding CIR mode i…
columnKbps SNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.11
hpnicfDot11SPOutCirValue
Represents the CIR of outbound direction of this service policy. If the value is 0, it means that no flow control is applied to the service policy, and the corresponding CIR mode …
columnKbps SNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.13
hpnicfDot11WlanInfPVID
Represents the VLAN ID of SSID.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.14
hpnicfDot11SPInCirStaticValue
Represents the CIR of inbound direction for static CIR mode.
columnKbps SNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.15
hpnicfDot11SPOutCirStaticValue
Represents the CIR of outbound direction for static CIR mode.
columnKbps SNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.16
hpnicfDot11SPIsolate
If it is true, then stations connected with the service policy are isolated.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.17
hpnicfDot11WlanexAuthServerIP
Represents the IP address of the Wlanex Authentication server
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.18
hpnicfDot11SPBeaconMeasEnable
If it is true, then beacon-measurement is enabled.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.19
hpnicfDot11SSIDName
Represents the ESS. As per CLI, the value of service policy name will be SSID.
columnHPN-ICF-DOT11-REF-MIBHpnicfDot11SSIDStringType.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.2
hpnicfDot11SPBeaconMeasType
Represents what the work mode for BeaconMeasurement type. The following values are supported: passive, - BeaconMeasurement will use the passive type. active - BeaconMe…
columnEnumeration.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.20
hpnicfDot11SPBeaconMeasInterval
Represents the beacon-measurement interval.
columnsecond Integer32.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.21
hpnicfDot11AuthenModeCM
Represents the Authentication mode defined by 802.11.
columnEnumeration.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.22
hpnicfDot11SecIEStatusCM
To enable the security Information element in the beacon and probe response frames sent by AP.
columnEnumeration.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.23
hpnicfDot11SecurityCiphersCM
The WLAN system support the following cipher type for data frame encryption. none wep40 wep104 tkip aesccmp wpi-SMS4 When the value of node equals to zero, it means no configurati…
columnEnumeration.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.24
hpnicfDot11SrvPolicyStatusCM
The status of the Service Policy.
columnEnumeration.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.25
hpnicfDot11SSIDHiddenCM
This attribute controls whether the SSID will be advertised in beacon frames. If it is dot11true, the SSID will not be advertised in beacon frames.
columnHPN-ICF-DOT11-REF-MIBHpnicfDot11TruthValueCM.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.26
hpnicfDot11SPIsolateCM
If it is dot11true, the clients connected with the service policy are isolated to each other.
columnHPN-ICF-DOT11-REF-MIBHpnicfDot11TruthValueCM.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.27
hpnicfDot11SSIDHidden
This attribute controls whether the SSID will be advertised in the beacon frame. If it is true, then SSID will not be advertised in the beacon frame.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.3
hpnicfDot11AuthenMode
Represents the Authentication mode defined by 802.11.
columnHPN-ICF-DOT11-REF-MIBHpnicfDot11AuthenType.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.4
hpnicfDot11SSIDEncryptionMode
Represents the encryption mode for this ESS.
columnHPN-ICF-DOT11-REF-MIBHpnicfDot11SSIDEncryptModeType.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.5
hpnicfDot11WlanInfBindingType
Represents the service policy will bind to what kind of data forwarding interface.
columnOctetString.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.6
hpnicfDot11WlanInfBindingID
Represents the interface ID of the interface that ESS will bind to. If the value is set to -1, the binding will be removed.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.7
hpnicfDot11SrvPolicyRowStatus
The status of this table entry.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.8
hpnicfDot11ClientMaxCount
Represent the maximum number of stations supported by this service policy.
columnInteger32.1.3.6.1.4.1.11.2.14.11.15.2.75.4.2.2.1.9