hpnicfDot11RCRadioRateCM

HPN-ICF-DOT11-CFG-MIB · .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.17
MIB view Table view

Object

column r/w OctetString 
Set data transmit rates for the radio, in the format of 1,2,5.5...
For 802.11n radios, the format of each value can be MCS X.  The data transmit
rates between AP and client should be one of the configured rates.
(Note: For 802.11n radios, the first value is mandatory rate, and the second
value is supported rate.  If more than two rate values are configured, the
configuration will not take effect.  If only one rate value is configured,
the mandatory rate will be set to the default value.)

Context

MIB
HPN-ICF-DOT11-CFG-MIB
OID
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.17
Type
column
Access
readwrite
Status
current
Parent
hpnicfDot11RadioConfigEntry
Table
hpnicfDot11RadioConfigTable
Siblings
18

Syntax

OctetString

Values & Constraints

Object Constraints
range: 0-255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hpnicfDot11RCAPSerialID
This object represents the Serial ID of AP.
columnOctetString.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.1
hpnicfDot11RCRadioStatus
Represents the radio admin status whether is enabled or disabled.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.10
hpnicfDot11RCRadioRate
Set data transmit rates for the radio, in the format of 1,2,5.5... For 802.11n radios, the format can be MCS X. The data transmit rates between AP and STA must fall into the conf…
columnOctetString.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.11
hpnicfDot11RCPwrAdjustStepLength
Power adjustment step-length in dBm.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.12
hpnicfDot11RCRadioType2
This object represents the radio will work with which 802.11 radio type.
columnHPN-ICF-DOT11-REF-MIBHpnicfDot11RadioType2.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.13
hpnicfDot11RCPreambleLenCM
This object represents whether use long or short preamble for 802.11 MAC frame. When hpnicfDot11CfgRadioType is either dot11b or dot11g, then value for hpnicfDot11PreambleLenCM wi…
columnEnumeration.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.14
hpnicfDot11RCDynamicChlStateCM
Enable/Disable dynamic channel selection.
columnEnumeration.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.15
hpnicfDot11RCRadioStatusCM
Represents the radio admin status whether is enabled or disabled.
columnEnumeration.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.16
hpnicfDot11RCDynamicPowerStateCM
Enable/disable dynamic power selection for the band.
columnHPN-ICF-DOT11-REF-MIBHpnicfDot11TruthValueCM.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.18
hpnicfDot11RCRssiThresholdCM
Represents the minimum value of the RSSI. The clients with RSSI below this value will be refused to associate.
columndBm SNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.19
hpnicfDot11RCRadioID
This object represents each radio.
columnHPN-ICF-DOT11-REF-MIBHpnicfDot11RadioScopeType.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.2
hpnicfDot11RCRadioType
This object represents the radio will work with which 802.11 radio type.
columnHPN-ICF-DOT11-REF-MIBHpnicfDot11RadioType.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.3
hpnicfDot11RCChannel
This object represents the channel allocation of radio.
columnHPN-ICF-DOT11-REF-MIBHpnicfDot11ChannelScopeType.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.4
hpnicfDot11RCPreambleLen
This object represents whether use long or short preamble for 802.11 MAC frame. When hpnicfDot11CfgRadioType is either dot11b or dot11g, then value for hpnicfDot11PreambleLen will…
columnHPN-ICF-DOT11-REF-MIBHpnicfDot11PreambleType.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.5
hpnicfDot11RCPwrAttValue
This object represents the value of power attenuation.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.6
hpnicfDot11RCApPowerLevel
Represents the maximal transmit power scope for AP.
columndbm HPN-ICF-DOT11-REF-MIBHpnicfDot11TxPwrLevelScopeType.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.7
hpnicfDot11RCDynamicChlState
Enable/Disable dynamic channel selection.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.8
hpnicfDot11RCDynamicPowerState
Enable/Disable dynamic power selection for the band.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.9