hpnicfDot11RCPwrAdjustStepLength
HPN-ICF-DOT11-CFG-MIB ·
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.12
Object
column
SNMPv2-SMIInteger32
Power adjustment step-length in dBm.
Context
- MIB
- HPN-ICF-DOT11-CFG-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.12- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hpnicfDot11RadioConfigEntry
- Table
- hpnicfDot11RadioConfigTable
- Siblings
- 18
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpnicfDot11RCAPSerialID This object represents the Serial ID of AP. | column | OctetString | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.1 |
| hpnicfDot11RCRadioStatus Represents the radio admin status whether is enabled
or disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.10 |
| hpnicfDot11RCRadioRate Set data transmit rates for the radio, in the format of 1,2,5.5...
For 802.11n radios, the format can be MCS X. The data transmit rates
between AP and STA must fall into the conf… | column | OctetString | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.11 |
| hpnicfDot11RCRadioType2 This object represents the radio will work with which 802.11 radio
type. | column | HPN-ICF-DOT11-REF-MIBHpnicfDot11RadioType2 | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.13 |
| hpnicfDot11RCPreambleLenCM This object represents whether use long or short preamble for 802.11
MAC frame.
When hpnicfDot11CfgRadioType is either dot11b or dot11g,
then value for hpnicfDot11PreambleLenCM wi… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.14 |
| hpnicfDot11RCDynamicChlStateCM Enable/Disable dynamic channel selection. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.15 |
| hpnicfDot11RCRadioStatusCM Represents the radio admin status whether is enabled
or disabled. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.16 |
| hpnicfDot11RCRadioRateCM Set data transmit rates for the radio, in the format of 1,2,5.5...
For 802.11n radios, the format of each value can be MCS X. The data transmit
rates between AP and client should… | column | OctetString | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.17 |
| hpnicfDot11RCDynamicPowerStateCM Enable/disable dynamic power selection for the band. | column | HPN-ICF-DOT11-REF-MIBHpnicfDot11TruthValueCM | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.18 |
| hpnicfDot11RCRssiThresholdCM Represents the minimum value of the RSSI.
The clients with RSSI below this value will be refused to associate. | column | dBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.19 |
| hpnicfDot11RCRadioID This object represents each radio. | column | HPN-ICF-DOT11-REF-MIBHpnicfDot11RadioScopeType | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.2 |
| hpnicfDot11RCRadioType This object represents the radio will work with which 802.11 radio
type. | column | HPN-ICF-DOT11-REF-MIBHpnicfDot11RadioType | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.3 |
| hpnicfDot11RCChannel This object represents the channel allocation of radio. | column | HPN-ICF-DOT11-REF-MIBHpnicfDot11ChannelScopeType | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.4 |
| hpnicfDot11RCPreambleLen This object represents whether use long or short preamble for 802.11
MAC frame.
When hpnicfDot11CfgRadioType is either dot11b or dot11g,
then value for hpnicfDot11PreambleLen will… | column | HPN-ICF-DOT11-REF-MIBHpnicfDot11PreambleType | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.5 |
| hpnicfDot11RCPwrAttValue This object represents the value of power attenuation. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.6 |
| hpnicfDot11RCApPowerLevel Represents the maximal transmit power scope for AP. | column | dbm HPN-ICF-DOT11-REF-MIBHpnicfDot11TxPwrLevelScopeType | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.7 |
| hpnicfDot11RCDynamicChlState Enable/Disable dynamic channel selection. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.8 |
| hpnicfDot11RCDynamicPowerState Enable/Disable dynamic power selection for the band. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.15.2.75.4.3.8.1.9 |