hpSwitchNotificationObjects
HP-SWITCH-BASIC-CONFIG-MIB ·
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.0
Object
node
No description available.
Context
- MIB
- HP-SWITCH-BASIC-CONFIG-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.0- Type
- node
- Parent
- hpSwitchBasicConfigObjects
- Siblings
- 20
- Children
- 7
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpSwitchSaveConfig When this object is set to to 'saveConfig' it
results in saving the running configuration of the
switch to flash. The saved configuration becomes
the boot-up configuration of the … | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.1 |
| hpSwitchStartupConfigNotifyEnable Indicates whether the SNMP entity is permitted
to generate hpSwitchStartupConfigChange notifications.
Default is disabled. | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.10 |
| hpSwitchImplicitConfigSave This object is to enable/disable the implicit
write-memory (saving the running-config to the
flash) done after every successful SNMP
set operation.
When set to 'enable'… | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.11 |
| hpSwitchRunningCfgChgObjects | node | - | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12 |
| hpSwitchSecureModeLevel Indicates current Secure-Mode Level of switch
standard : switch operates with standard security
capabilities.
enhanced : switch operates with enhanced security
capabilities for co… | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.13 |
| hpSwitchCdpRunMode Indicates the mode of CDP processing. This variable
has no effect when CDP is disabled (cdpGlobalRun = FALSE). | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.14 |
| hpSwitchCdpObjects | node | - | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.15 |
| hpSwitchIgnoreUntagMacPortList Prevent learning MAC addresses on the specified ports
when the VLAN is untagged and the destination MAC
address is one of the following:
01000C-CCCCCC (CDP)
0180c2-00000e (LLDP)
0… | scalar | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.16 |
| hpSwitchControlPlaneProtectionAdminStatus The operational status of the Control Plane Protection
feature. When Control Plane Protection feature is enabled
on a device, if the number of IP error packets exceed
the threshol… | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.17 |
| hpSwitchFPModules | node | - | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.19 |
| hpSwitchAliasTable Table of alias configurations for CLI commands.
This table contains information about name of the
alias and the corresponding CLI command. | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.2 |
| hpSwitchRESTInterfaceStatus The object that can be used to enable or disable
the REST interface. The default value is enable. | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.20 |
| hpSwitchRESTSessionIdleTimeout The time period after which the REST session timeout
occurs. A user can configure this parameter.
The default value is 600 seconds. | scalar | seconds Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.21 |
| hpSwitchACLConfig | node | - | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.3 |
| hpicfPortCopyNameTable This table contains Mirroring Destination name String. | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.4 |
| hpSwitchDefaultLogon This indicates whether switch should boot to CLI (default)
or menu. The changes takes effect after rebooting the
switch. | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.5 |
| hpSwitchChassisLocateTable This table is contains information about the current
state of all the chassis locate LEDs. | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.6 |
| hpSwitchModules | node | - | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.7 |
| hpSwitchWebSupportUrl URL for the web interface support page. | scalar | OctetString | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.8 |
| hpSwitchStartupConfigSeqNum This is the value of the global startup-config
sequential number. Every change to startup-config
increments the value by 1. Must be stored in
non-volatile memory to be carried ove… | scalar | Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpSwitchStartupConfigSource Indicate the method of change to startup config
was initiated. | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.0.1 |
| hpSwitchStartupConfigSourceIPAddrType Indicates the source address type of network agent
which made a change. Not valid (set to zero)
if change is made via CLI on system console. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.0.2 |
| hpSwitchStartupConfigSourceIPAddr Indicates the source address of network agent
which made a change. Not valid (set to zero)
if change is made via CLI on system console. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.0.3 |
| hpSwitchStartupConfigSourceUsername Indicates the username of CLI user making the
change to startup config. Zero-string if username
is not set or change is made via SNMP | scalar | OctetString | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.0.4 |
| hpSwitchStartupConfigThrottled Indicates if notification throttle was activated
and one or more notifications were dropped. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.0.5 |
| hpSwitchStartupConfigChange The hpSwitchStartupConfigChange
notification signifies that switch's startup
config was modified by user/manager.
Notifications might be buffered on the system to
be sent after th… | notification | - | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.0.6 |
| hpSwitchRunningConfigChange Notification of a running configuration change
event as recorded in hpSwitchRunningCfgChgTable. | notification | - | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.0.7 |