HP-SWITCH-BASIC-CONFIG-MIB Table View

A table that contains information about the
source port traffic filter configuration in this
device.

hpicfBridgeFilterConfigEntry row .1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.2.1

Information about a source port traffic filter
configuration in this device.

Indexes

hpicfBridgeFilterName

Column	Syntax	OID
hpicfBridgeFilterName This variable specifies the name of the filter. Filter name can be upto 20 characters. Filter name cannot contain tilde (~). A filter name can not be same as port-name.	OctetString Constraints: range: 0-100	.1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.2.1.1
hpicfBridgeFilterDropPortMask This variable specifies a group of ports to which forwarding of filtered traffic is not permitted.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.2.1.2
hpicfBridgeFilterEntryStatus Row can be deleted only when no port are mapped to this filter in 'hpSwitchFilterConfigEntry' table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.5.1.7.1.8.2.1.3

A table that contains information about the IGMP
proxy domain configurations on this switch.

hpSwitchIgmpProxyDomainConfigEntry row .1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.5.1

The information associated with each IGMP
proxy domain configuration.

Indexes

hpSwitchIgmpProxyDomainId

Column	Syntax	OID
hpSwitchIgmpProxyDomainId The domain id that uniquely identifies a row in the IGMP proxy domain configuration table.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.5.1.1
hpSwitchIgmpProxyDomainStatus The status of a IGMP proxy domain configuration entry. Allows creation/deletion of the IGMP proxy domain entry. Row cannot be deleted if the IGMP proxy domain is associated with a VLAN.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.5.1.2
hpSwitchIgmpProxyDomainName The IGMP proxy domain name.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.5.1.3
hpSwitchIgmpProxyDomainIp The IGMP proxy domain IP.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.5.1.4
hpSwitchIgmpProxyMcastLowerIp The IGMP proxy domain's lower multicast IP.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.5.1.5
hpSwitchIgmpProxyMcastUpperIp The IGMP proxy domain's upper multicast IP.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.11.2.14.11.5.1.7.1.15.5.1.6

Table of alias configurations for CLI commands.
This table contains information about name of the
alias and the corresponding CLI command.

hpSwitchAliasEntry row .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.2.1

A row in the alias config table.

Indexes

hpSwitchAliasName

Column	Syntax	OID
hpSwitchAliasName Name of the alias which uniquely identifies alias configuration table. 'hpSwitchAliasName' can be used in place of 'hpSwitchAliasCommand` on the CLI. Maximum allowed length for alias name is 32 characters.	OctetString Constraints: range: 0-100	.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.2.1.1
hpSwitchAliasCommand CLI command for which 'hpSwitchAliasName' can be used in CLI. Maximum allowed length for alias command is 255 characters. This object is required to create an entry in the table.	OctetStringr/w Constraints: range: 1-255	.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.2.1.2
hpSwitchAliasConfigRowStatus Controls creation/deletion of entries in alias table. Row cant be created when 'hpSwitchAliasCommand' is of zero length. Row transition to 'notReady' or 'notInService' states are not allowed.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.2.1.3

This table contains Mirroring Destination name String.

hpicfPortCopyNameEntry row .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.4.1

An entry in the hpicfPortCopyNameEntry contains
Mirroring Destination name string.

Indexes

No indexes recorded

Column	Syntax	OID
hpicfPortCopyName Mirroring Destination name string.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.4.1.1

This table is contains information about the current
state of all the chassis locate LEDs.

hpSwitchChassisLocateEntry row .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.6.1

Contains information about the current state of a
particular chassis LED.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
hpSwitchChassisLocateState The current state of the chassis locate LED.	Enumerationr/w Enumerated Values: 1 off 2 on 3 blink	.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.6.1.1
hpSwitchChassisLocateDuration The duration for which the current LED state is to be maintained. The minimum value is 60 and the maximum value is 86400. The 'off' state does not require a duration. A get request for the duration when the state is …	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.6.1.2
hpSwitchChassisLocateWhen When to apply the values specified by hpSwitchChassisLocateState and hpSwitchChassisLocateDuration. If not specified, the default is now.	Enumerationr/w Enumerated Values: 1 now 2 startup	.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.6.1.3

A table describing all modules
that can be supported by the device.

hpSwitchModuleInfoEntry row .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.7.1.1

The information regarding the module type
in the switch. This table lists all the
supported module types. The supported module type
will have the equivalent module name.

Indexes

hpSwitchModuleInfoModId

Column	Syntax	OID
hpSwitchModuleInfoModId The module Id. This is a sequence number	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.7.1.1.1
hpSwitchModuleInfoModType The module type in the switch. This is the Jnumber string that is supported on the device.	OctetString Constraints: range: 1-255	.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.7.1.1.2

A table to configure the module
type for a specific module.

hpSwitchModuleConfigEntry row .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.7.2.1

This entry is used to configure the module type
for a specific module. Configuration of module
type is not allowed if it is already configured.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
hpSwitchModuleConfigModType The module type in the switch. This is the Jnumber supported on the device. The supported types are listed in hpSwitchModuleInfoTable.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.7.2.1.1
hpSwitchModuleConfigModName The module name in the switch.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.7.2.1.2
hpSwitchModuleConfigModRemove This MIB object is used to remove the slot configuration. Setting this object to true (1) will remove the module configuration. Default value is false (2). This object should always returns false (2). The module can be …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.7.2.1.3

A table of latest 32 running configuration change
events.

hpSwitchRunningCfgChgEventEntry row .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.6.1

Information about running configuration
change event on this switch.

Indexes

hpSwitchRunningCfgChgEventTableIndex

Column	Syntax	OID
hpSwitchRunningCfgChgEventTableIndex The Index for hpSwitchRunningCfgChgTable.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.6.1.1
hpSwitchRunningCfgChgEventId Identifies a specific running config change. Monotonically increasing values will be assigned by the system to each event as it occurs. If the system is reset, these event ID values will be reset as well.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.6.1.2
hpSwitchRunningCfgChgEventMethod Indicates the source through which change to running config was initiated.	Enumeration Enumerated Values: 0 unknown 1 cli 2 menu 3 snmp 4 webUI 5 internalEvent	.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.6.1.3
hpSwitchRunningCfgChgEventSourceIPAddrType Indicates the source address type of network agent which made a change. This object value is set to an address type of unknown when not applicable.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.6.1.4
hpSwitchRunningCfgChgEventSourceIPAddr Indicates the source address of network agent which made a running config change. The value is an address of length 0 (unknown(0)) if not available or not applicable.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.6.1.5
hpSwitchRunningCfgChgEventUsername Indicates the username of the user making the change the change to running config. Empty string (length 0) if username is not available or not applicable.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.6.1.6
hpSwitchRunningCfgChgEventDateAndTime Indicates the date and time of the running config change.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12.6.1.7

Information about cdp pre-standard-voice admin status for
each port in this device.

hpSwitchCdpPreStdVoiceEntry row .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.15.1.1

Information about cdp pre-standard-voice admin status
for a switch port.

Indexes

hpSwitchCdpPreStdVoiceIfIndex

Column	Syntax	OID
hpSwitchCdpPreStdVoiceIfIndex The ifIndex value of the local interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.15.1.1.1
hpSwitchCdpPreStdVoiceStatus Indicates the admin status for cdp pre-standard-voice mode for this cdpInterfaceIfIndex entry Default is txAndRx and this value is valid only if hpSwitchCdpRunMode is 'preStdVoice(3)' .	Enumerationr/w Enumerated Values: 1 txAndRx 2 rxOnly	.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.15.1.1.2

A table that contains the configuration details
for flexible modules.

hpSwitchFPModuleConfigEntry row .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.19.1.1

An entry in the table that contains the configuration
details of a flexible module.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
hpSwitchFPModuleConfigType The J-Number of the flexible module. When set to a value other than none, the value can only be changed to none. Setting this object to none (0) erases the flexible module configuration .	Enumerationr/w Enumerated Values: 0 none 1 jl078a 2 jl079a 3 jl081a 4 jl083a	.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.19.1.1.1
hpSwitchFPModuleConfigName The flexible module name in the switch. Some devices do not support configuration of the flexible module name and will return an error if this object is set.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.19.1.1.2