hpSwitchControlPlaneProtectionAdminStatus
HP-SWITCH-BASIC-CONFIG-MIB ·
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.17
Object
scalar
r/w
Enumeration
The operational status of the Control Plane Protection feature. When Control Plane Protection feature is enabled on a device, if the number of IP error packets exceed the threshold value they are dropped at the data plane. This eliminates the processing of error packets by control plane, thereby reducing the load on the CPU.
Context
- MIB
- HP-SWITCH-BASIC-CONFIG-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.17- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hpSwitchBasicConfigObjects
- Siblings
- 20
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpSwitchNotificationObjects | node | - | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.0 |
| hpSwitchSaveConfig When this object is set to to 'saveConfig' it
results in saving the running configuration of the
switch to flash. The saved configuration becomes
the boot-up configuration of the … | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.1 |
| hpSwitchStartupConfigNotifyEnable Indicates whether the SNMP entity is permitted
to generate hpSwitchStartupConfigChange notifications.
Default is disabled. | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.10 |
| hpSwitchImplicitConfigSave This object is to enable/disable the implicit
write-memory (saving the running-config to the
flash) done after every successful SNMP
set operation.
When set to 'enable'… | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.11 |
| hpSwitchRunningCfgChgObjects | node | - | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12 |
| hpSwitchSecureModeLevel Indicates current Secure-Mode Level of switch
standard : switch operates with standard security
capabilities.
enhanced : switch operates with enhanced security
capabilities for co… | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.13 |
| hpSwitchCdpRunMode Indicates the mode of CDP processing. This variable
has no effect when CDP is disabled (cdpGlobalRun = FALSE). | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.14 |
| hpSwitchCdpObjects | node | - | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.15 |
| hpSwitchIgnoreUntagMacPortList Prevent learning MAC addresses on the specified ports
when the VLAN is untagged and the destination MAC
address is one of the following:
01000C-CCCCCC (CDP)
0180c2-00000e (LLDP)
0… | scalar | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.16 |
| hpSwitchFPModules | node | - | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.19 |
| hpSwitchAliasTable Table of alias configurations for CLI commands.
This table contains information about name of the
alias and the corresponding CLI command. | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.2 |
| hpSwitchRESTInterfaceStatus The object that can be used to enable or disable
the REST interface. The default value is enable. | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.20 |
| hpSwitchRESTSessionIdleTimeout The time period after which the REST session timeout
occurs. A user can configure this parameter.
The default value is 600 seconds. | scalar | seconds Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.21 |
| hpSwitchACLConfig | node | - | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.3 |
| hpicfPortCopyNameTable This table contains Mirroring Destination name String. | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.4 |
| hpSwitchDefaultLogon This indicates whether switch should boot to CLI (default)
or menu. The changes takes effect after rebooting the
switch. | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.5 |
| hpSwitchChassisLocateTable This table is contains information about the current
state of all the chassis locate LEDs. | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.6 |
| hpSwitchModules | node | - | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.7 |
| hpSwitchWebSupportUrl URL for the web interface support page. | scalar | OctetString | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.8 |
| hpSwitchStartupConfigSeqNum This is the value of the global startup-config
sequential number. Every change to startup-config
increments the value by 1. Must be stored in
non-volatile memory to be carried ove… | scalar | Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.9 |