hpSwitchCdpRunMode

HP-SWITCH-BASIC-CONFIG-MIB · .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.14
MIB view Table view

Object

scalar r/w Enumeration 
Indicates the mode of CDP processing. This variable
has no effect when CDP is disabled (cdpGlobalRun = FALSE).

Context

MIB
HP-SWITCH-BASIC-CONFIG-MIB
OID
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.14
Type
scalar
Access
readwrite
Status
current
Parent
hpSwitchBasicConfigObjects
Siblings
20

Syntax

Enumeration

Values & Constraints

Enumerated Values
1rxonly
2passthru
3preStdVoice

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hpSwitchNotificationObjectsnode-.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.0
hpSwitchSaveConfig
When this object is set to to 'saveConfig' it results in saving the running configuration of the switch to flash. The saved configuration becomes the boot-up configuration of the …
scalarEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.1
hpSwitchStartupConfigNotifyEnable
Indicates whether the SNMP entity is permitted to generate hpSwitchStartupConfigChange notifications. Default is disabled.
scalarEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.10
hpSwitchImplicitConfigSave
This object is to enable/disable the implicit write-memory (saving the running-config to the flash) done after every successful SNMP set operation. When set to 'enable'…
scalarEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.11
hpSwitchRunningCfgChgObjectsnode-.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12
hpSwitchSecureModeLevel
Indicates current Secure-Mode Level of switch standard : switch operates with standard security capabilities. enhanced : switch operates with enhanced security capabilities for co…
scalarEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.13
hpSwitchCdpObjectsnode-.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.15
hpSwitchIgnoreUntagMacPortList
Prevent learning MAC addresses on the specified ports when the VLAN is untagged and the destination MAC address is one of the following: 01000C-CCCCCC (CDP) 0180c2-00000e (LLDP) 0…
scalarQ-BRIDGE-MIBPortList.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.16
hpSwitchControlPlaneProtectionAdminStatus
The operational status of the Control Plane Protection feature. When Control Plane Protection feature is enabled on a device, if the number of IP error packets exceed the threshol…
scalarEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.17
hpSwitchFPModulesnode-.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.19
hpSwitchAliasTable
Table of alias configurations for CLI commands. This table contains information about name of the alias and the corresponding CLI command.
table-.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.2
hpSwitchRESTInterfaceStatus
The object that can be used to enable or disable the REST interface. The default value is enable.
scalarEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.20
hpSwitchRESTSessionIdleTimeout
The time period after which the REST session timeout occurs. A user can configure this parameter. The default value is 600 seconds.
scalarseconds Integer32.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.21
hpSwitchACLConfignode-.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.3
hpicfPortCopyNameTable
This table contains Mirroring Destination name String.
table-.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.4
hpSwitchDefaultLogon
This indicates whether switch should boot to CLI (default) or menu. The changes takes effect after rebooting the switch.
scalarEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.5
hpSwitchChassisLocateTable
This table is contains information about the current state of all the chassis locate LEDs.
table-.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.6
hpSwitchModulesnode-.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.7
hpSwitchWebSupportUrl
URL for the web interface support page.
scalarOctetString.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.8
hpSwitchStartupConfigSeqNum
This is the value of the global startup-config sequential number. Every change to startup-config increments the value by 1. Must be stored in non-volatile memory to be carried ove…
scalarUnsigned32.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.9