hpSwitchACLConfig
HP-SWITCH-BASIC-CONFIG-MIB ·
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.3
Object
node
No description available.
Context
- MIB
- HP-SWITCH-BASIC-CONFIG-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.3- Type
- node
- Parent
- hpSwitchBasicConfigObjects
- Siblings
- 20
- Children
- 4
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpSwitchNotificationObjects | node | - | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.0 |
| hpSwitchSaveConfig When this object is set to to 'saveConfig' it
results in saving the running configuration of the
switch to flash. The saved configuration becomes
the boot-up configuration of the … | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.1 |
| hpSwitchStartupConfigNotifyEnable Indicates whether the SNMP entity is permitted
to generate hpSwitchStartupConfigChange notifications.
Default is disabled. | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.10 |
| hpSwitchImplicitConfigSave This object is to enable/disable the implicit
write-memory (saving the running-config to the
flash) done after every successful SNMP
set operation.
When set to 'enable'… | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.11 |
| hpSwitchRunningCfgChgObjects | node | - | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.12 |
| hpSwitchSecureModeLevel Indicates current Secure-Mode Level of switch
standard : switch operates with standard security
capabilities.
enhanced : switch operates with enhanced security
capabilities for co… | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.13 |
| hpSwitchCdpRunMode Indicates the mode of CDP processing. This variable
has no effect when CDP is disabled (cdpGlobalRun = FALSE). | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.14 |
| hpSwitchCdpObjects | node | - | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.15 |
| hpSwitchIgnoreUntagMacPortList Prevent learning MAC addresses on the specified ports
when the VLAN is untagged and the destination MAC
address is one of the following:
01000C-CCCCCC (CDP)
0180c2-00000e (LLDP)
0… | scalar | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.16 |
| hpSwitchControlPlaneProtectionAdminStatus The operational status of the Control Plane Protection
feature. When Control Plane Protection feature is enabled
on a device, if the number of IP error packets exceed
the threshol… | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.17 |
| hpSwitchFPModules | node | - | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.19 |
| hpSwitchAliasTable Table of alias configurations for CLI commands.
This table contains information about name of the
alias and the corresponding CLI command. | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.2 |
| hpSwitchRESTInterfaceStatus The object that can be used to enable or disable
the REST interface. The default value is enable. | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.20 |
| hpSwitchRESTSessionIdleTimeout The time period after which the REST session timeout
occurs. A user can configure this parameter.
The default value is 600 seconds. | scalar | seconds Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.21 |
| hpicfPortCopyNameTable This table contains Mirroring Destination name String. | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.4 |
| hpSwitchDefaultLogon This indicates whether switch should boot to CLI (default)
or menu. The changes takes effect after rebooting the
switch. | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.5 |
| hpSwitchChassisLocateTable This table is contains information about the current
state of all the chassis locate LEDs. | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.6 |
| hpSwitchModules | node | - | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.7 |
| hpSwitchWebSupportUrl URL for the web interface support page. | scalar | OctetString | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.8 |
| hpSwitchStartupConfigSeqNum This is the value of the global startup-config
sequential number. Every change to startup-config
increments the value by 1. Must be stored in
non-volatile memory to be carried ove… | scalar | Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpSwitchAclLogtimeoutConfig The time in seconds between ACL logging summary messages.
Some devices may limit the range to 30..300. | scalar | Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.3.1 |
| hpSwitchAclIpv4DenyFragmentedTcpHeader Configure the device to drop all IPv4 packets containing a
fragmented TCP header. | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.3.2 |
| hpSwitchAclIpv6DenyNonClassifiableL4Header Configure the device to drop all IPv6 packets for which the
Layer 4 header cannot be processed by ACL hardware. | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.3.3 |
| hpSwitchAclGroupingEnable This object enables or disables ACL Grouping support.
When set to true(1), ACL Grouping will allow for the
sharing of hardware entries from an ACL with the same
name and type and … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.5.1.7.1.29.1.3.4 |