hpicfPimStateRefreshInterval
HP-ICF-PIM ·
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.2
Object
scalar
r/w
seconds Integer32
The interval between successive State Refresh messages originated by this router. Its default value is 60 seconds. The maximum value allowed in PIM for State Refresh interval will be 100.
Context
- MIB
- HP-ICF-PIM
- OID
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.2- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- hpicfPim
- Siblings
- 20
Syntax
seconds Integer32
Values & Constraints
Object Constraints
range: 10-300
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpicfPimAdminStatus The operational status of the PIM routing protocol
on this router. Default is disabled. | scalar | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.1 |
| hpicfPimNumStaticRpfEntries Total number of Static RPF entries. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.10 |
| hpicfPimVersion Currently running PIM Version. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.11 |
| hpicfPimStarGEntries Total number of entries in the (*,G) table | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.12 |
| hpicfPimSGEntries Total number of entries in the (S,G) table. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.13 |
| hpicfPimMRouteTable HP extensions to rfc2932's ipMRouteEntry table. | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.14 |
| hpicfPimTotalNeighborCount PIM Neighbor Count. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.15 |
| hpicfPimNeighborTable HP extensions to the pimNeighborTable. | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.16 |
| hpicfPimUcastRouteTable Cached Unicast Route related to PIM. | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.17 |
| hpicfPimJoinPruneTable Info on Join-Prune messages to send | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.18 |
| hpicfPimRPSetTable Extensions to rfc2943's pimRPSetTable. | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.19 |
| hpicfPimIfMessageCounterTable Table of per-interface message counters. | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.20 |
| hpicfPimUnackGraftsTable Information about unacknowledged graft messages on the network. | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.21 |
| hpicfPimSPTThreshold Specifies a threshold for switching to the Shortest
Path Tree (SPT) on this router. If the object has
the special value of -1, the Shared Tree rooted to the
Rendezvous Point (RP… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.3 |
| hpicfPimTrapControl Indicates whether the PIM-enabled router will generate
SNMP traps for PIM events. The set bit means 'enabled'.
- neighborLoss(0)
This bit controls whether the notific… | scalar | Bits | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.4 |
| hpicfPimStaticRPSetTable The (conceptual) table containing statically
configured Rendezvous Points (RPs) for IP multicast
group mappings. This information is being used
in the PIM Sparse mode only. | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.5 |
| hpicfPimIfTable HP extensions to the pimInterfaceTable. | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6 |
| hpicfPimComponentTable HP extensions to the pimComponentTable - the
(conceptual) table containing objects specific to a
PIM domain. One row exists for each domain to which
the router is connected. Typ… | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7 |
| hpicfPimRemoveConfig PIM is halted. This objects clears all existing PIM
configuration, intializes the pim config to the default
state. SnmpGet on this will always return false.
An SnmpSet of false … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.8 |
| hpicfPimStaticRpfTable The (conceptual) table containing statically configured
reverse path forwarding (RPF) source address to interface
mappings. This information is currently used in the PIM
sparse… | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9 |