hpicfPimSPTThreshold

HP-ICF-PIM · .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.3
MIB view Table view

Object

scalar r/w SNMPv2-SMIInteger32 
Specifies a threshold for switching to the Shortest 
Path Tree (SPT) on this router. If the object has 
the special value of -1, the Shared Tree rooted to the
Rendezvous Point (RP) will be used indefinitely on the 
router. Default is -1.

Context

MIB
HP-ICF-PIM
OID
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.3
Type
scalar
Access
readwrite
Status
current
Parent
hpicfPim
Siblings
20

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hpicfPimAdminStatus
The operational status of the PIM routing protocol on this router. Default is disabled.
scalarEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.1
hpicfPimNumStaticRpfEntries
Total number of Static RPF entries.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.10
hpicfPimVersion
Currently running PIM Version.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.11
hpicfPimStarGEntries
Total number of entries in the (*,G) table
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.12
hpicfPimSGEntries
Total number of entries in the (S,G) table.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.13
hpicfPimMRouteTable
HP extensions to rfc2932's ipMRouteEntry table.
table-.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.14
hpicfPimTotalNeighborCount
PIM Neighbor Count.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.15
hpicfPimNeighborTable
HP extensions to the pimNeighborTable.
table-.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.16
hpicfPimUcastRouteTable
Cached Unicast Route related to PIM.
table-.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.17
hpicfPimJoinPruneTable
Info on Join-Prune messages to send
table-.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.18
hpicfPimRPSetTable
Extensions to rfc2943's pimRPSetTable.
table-.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.19
hpicfPimStateRefreshInterval
The interval between successive State Refresh messages originated by this router. Its default value is 60 seconds. The maximum value allowed in PIM for State Refresh interval will…
scalarseconds Integer32.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.2
hpicfPimIfMessageCounterTable
Table of per-interface message counters.
table-.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.20
hpicfPimUnackGraftsTable
Information about unacknowledged graft messages on the network.
table-.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.21
hpicfPimTrapControl
Indicates whether the PIM-enabled router will generate SNMP traps for PIM events. The set bit means 'enabled'. - neighborLoss(0) This bit controls whether the notific…
scalarBits.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.4
hpicfPimStaticRPSetTable
The (conceptual) table containing statically configured Rendezvous Points (RPs) for IP multicast group mappings. This information is being used in the PIM Sparse mode only.
table-.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.5
hpicfPimIfTable
HP extensions to the pimInterfaceTable.
table-.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6
hpicfPimComponentTable
HP extensions to the pimComponentTable - the (conceptual) table containing objects specific to a PIM domain. One row exists for each domain to which the router is connected. Typ…
table-.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7
hpicfPimRemoveConfig
PIM is halted. This objects clears all existing PIM configuration, intializes the pim config to the default state. SnmpGet on this will always return false. An SnmpSet of false …
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.8
hpicfPimStaticRpfTable
The (conceptual) table containing statically configured reverse path forwarding (RPF) source address to interface mappings. This information is currently used in the PIM sparse…
table-.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9