hpicfPimIfNumRoutersNotUsingDRPriority
HP-ICF-PIM ·
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.20
Object
column
SNMPv2-SMICounter32
Number of routers on network not using DR priority.
Context
- MIB
- HP-ICF-PIM
- OID
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.20- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hpicfPimIfEntry
- Table
- hpicfPimIfTable
- Siblings
- 20
Syntax
SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpicfPimIfAddress This is copy of pimInterfaceAddress with read-create
access. PIM uses this source address to send its
protocol packets out on this interface. This address can
be set to one of … | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.1 |
| hpicfPimIfMaxGraftRetries The maximum number of times this router will re-send a
Graft on this interface. Default is 2. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.10 |
| hpicfPimIfSRTTLThreshold The Time To Live in a PIM-DM State Refresh message at
which it is not forwarded on this interface. Default is 0. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.11 |
| hpicfPimIfLanDelayEnabled Evaluates to TRUE if all routers on this interface are
using the LAN Prune Delay Option. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.12 |
| hpicfPimIfSRCapable Evaluates to TRUE if all routers on this interface are
using the State Refresh Capable Option. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.13 |
| hpicfPimIfDRPriority The Designated Router Priority inserted into the DR
priority option on this interface. Default is 1. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.14 |
| hpicfPimIfNBRTimeout Time interval after which the router will consider a
neighbor to not be present, if no PIM Hello messages
arrived on the interface. Default is 180 seconds. | column | seconds Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.15 |
| hpicfPimIfNBRCount PIM Neighbor Count. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.16 |
| hpicfPimIfNegotiatedPropagationDelay Negotiated PIM LAN/Propagation Delay (ms). | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.17 |
| hpicfPimIfNegotiatedOverrideInterval Negotiated PIM Override Interval (ms). | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.18 |
| hpicfPimIfAssertHoldInterval PIM Assert Hold Interval (s). | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.19 |
| hpicfPimIfTrigHelloInterval The maximum time before a triggered PIM Hello message
is transmitted on this interface. Default is 5 seconds. | column | seconds Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.2 |
| hpicfPimIfNumRoutersNotUsingLanDelay Number of routers on network not using LAN Delay. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.21 |
| hpicfPimIfHelloHoldtime The value set in the Holdtime field of Hello messages
transmitted on this interface. This should be 3.5
times the value of pimInterfaceHelloInterval.
Default is 105 seconds. | column | seconds Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.3 |
| hpicfPimIfLanPruneDelay Turns the LAN Prune Delay options ON and OFF, on this
interface. Default is true. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.4 |
| hpicfPimIfPropagationDelay The value inserted into the LAN Prune Delay field of a
LAN Prune Delay option on this interface.
Default is 500 milliseconds. | column | milliseconds Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.5 |
| hpicfPimIfOverrideInterval The value inserted into the Override Interval field of
a LAN Prune Delay option on this interface.
Default is 2500 milliseconds. | column | milliseconds Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.6 |
| hpicfPimIfGenerationID Turns the Generation ID option ON and OFF, on this
interface. Default is false. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.7 |
| hpicfPimIfJoinPruneHoldtime The value inserted into the Holdtime field of a Join/
Prune message sent on this interface. The value should
be 3.5 times pimInterfaceJoinPruneInterval.
Default is 210 seconds. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.8 |
| hpicfPimIfGraftRetryInterval The interval a PIM router waits for a Graft Ack before
re-sending a Graft on this interface.
Default is 3 seconds. | column | seconds Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.9 |