hpicfPimIfAddress
HP-ICF-PIM ·
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.1
Object
This is copy of pimInterfaceAddress with read-create access. PIM uses this source address to send its protocol packets out on this interface. This address can be set to one of IP addresses of the interface or 255.255.255.255 if the address is determined dynamically based on the current IP configuration. The currently used source address is value of pimInterfaceAddress in the latter case.
Context
- MIB
- HP-ICF-PIM
- OID
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hpicfPimIfEntry
- Table
- hpicfPimIfTable
- Siblings
- 20
Syntax
SNMPv2-SMIIpAddress
- Source
- SNMPv2-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpicfPimIfMaxGraftRetries The maximum number of times this router will re-send a
Graft on this interface. Default is 2. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.10 |
| hpicfPimIfSRTTLThreshold The Time To Live in a PIM-DM State Refresh message at
which it is not forwarded on this interface. Default is 0. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.11 |
| hpicfPimIfLanDelayEnabled Evaluates to TRUE if all routers on this interface are
using the LAN Prune Delay Option. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.12 |
| hpicfPimIfSRCapable Evaluates to TRUE if all routers on this interface are
using the State Refresh Capable Option. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.13 |
| hpicfPimIfDRPriority The Designated Router Priority inserted into the DR
priority option on this interface. Default is 1. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.14 |
| hpicfPimIfNBRTimeout Time interval after which the router will consider a
neighbor to not be present, if no PIM Hello messages
arrived on the interface. Default is 180 seconds. | column | seconds Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.15 |
| hpicfPimIfNBRCount PIM Neighbor Count. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.16 |
| hpicfPimIfNegotiatedPropagationDelay Negotiated PIM LAN/Propagation Delay (ms). | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.17 |
| hpicfPimIfNegotiatedOverrideInterval Negotiated PIM Override Interval (ms). | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.18 |
| hpicfPimIfAssertHoldInterval PIM Assert Hold Interval (s). | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.19 |
| hpicfPimIfTrigHelloInterval The maximum time before a triggered PIM Hello message
is transmitted on this interface. Default is 5 seconds. | column | seconds Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.2 |
| hpicfPimIfNumRoutersNotUsingDRPriority Number of routers on network not using DR priority. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.20 |
| hpicfPimIfNumRoutersNotUsingLanDelay Number of routers on network not using LAN Delay. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.21 |
| hpicfPimIfHelloHoldtime The value set in the Holdtime field of Hello messages
transmitted on this interface. This should be 3.5
times the value of pimInterfaceHelloInterval.
Default is 105 seconds. | column | seconds Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.3 |
| hpicfPimIfLanPruneDelay Turns the LAN Prune Delay options ON and OFF, on this
interface. Default is true. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.4 |
| hpicfPimIfPropagationDelay The value inserted into the LAN Prune Delay field of a
LAN Prune Delay option on this interface.
Default is 500 milliseconds. | column | milliseconds Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.5 |
| hpicfPimIfOverrideInterval The value inserted into the Override Interval field of
a LAN Prune Delay option on this interface.
Default is 2500 milliseconds. | column | milliseconds Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.6 |
| hpicfPimIfGenerationID Turns the Generation ID option ON and OFF, on this
interface. Default is false. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.7 |
| hpicfPimIfJoinPruneHoldtime The value inserted into the Holdtime field of a Join/
Prune message sent on this interface. The value should
be 3.5 times pimInterfaceJoinPruneInterval.
Default is 210 seconds. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.8 |
| hpicfPimIfGraftRetryInterval The interval a PIM router waits for a Graft Ack before
re-sending a Graft on this interface.
Default is 3 seconds. | column | seconds Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.9 |