hpicfPimAdminStatus
HP-ICF-PIM ·
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.1
Object
scalar
r/w
Enumeration
The operational status of the PIM routing protocol on this router. Default is disabled.
Context
- MIB
- HP-ICF-PIM
- OID
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.1- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hpicfPim
- Siblings
- 20
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpicfPimNumStaticRpfEntries Total number of Static RPF entries. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.10 |
| hpicfPimVersion Currently running PIM Version. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.11 |
| hpicfPimStarGEntries Total number of entries in the (*,G) table | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.12 |
| hpicfPimSGEntries Total number of entries in the (S,G) table. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.13 |
| hpicfPimMRouteTable HP extensions to rfc2932's ipMRouteEntry table. | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.14 |
| hpicfPimTotalNeighborCount PIM Neighbor Count. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.15 |
| hpicfPimNeighborTable HP extensions to the pimNeighborTable. | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.16 |
| hpicfPimUcastRouteTable Cached Unicast Route related to PIM. | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.17 |
| hpicfPimJoinPruneTable Info on Join-Prune messages to send | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.18 |
| hpicfPimRPSetTable Extensions to rfc2943's pimRPSetTable. | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.19 |
| hpicfPimStateRefreshInterval The interval between successive State Refresh
messages originated by this router.
Its default value is 60 seconds. The maximum value allowed
in PIM for State Refresh interval will… | scalar | seconds Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.2 |
| hpicfPimIfMessageCounterTable Table of per-interface message counters. | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.20 |
| hpicfPimUnackGraftsTable Information about unacknowledged graft messages on the network. | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.21 |
| hpicfPimSPTThreshold Specifies a threshold for switching to the Shortest
Path Tree (SPT) on this router. If the object has
the special value of -1, the Shared Tree rooted to the
Rendezvous Point (RP… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.3 |
| hpicfPimTrapControl Indicates whether the PIM-enabled router will generate
SNMP traps for PIM events. The set bit means 'enabled'.
- neighborLoss(0)
This bit controls whether the notific… | scalar | Bits | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.4 |
| hpicfPimStaticRPSetTable The (conceptual) table containing statically
configured Rendezvous Points (RPs) for IP multicast
group mappings. This information is being used
in the PIM Sparse mode only. | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.5 |
| hpicfPimIfTable HP extensions to the pimInterfaceTable. | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6 |
| hpicfPimComponentTable HP extensions to the pimComponentTable - the
(conceptual) table containing objects specific to a
PIM domain. One row exists for each domain to which
the router is connected. Typ… | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7 |
| hpicfPimRemoveConfig PIM is halted. This objects clears all existing PIM
configuration, intializes the pim config to the default
state. SnmpGet on this will always return false.
An SnmpSet of false … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.8 |
| hpicfPimStaticRpfTable The (conceptual) table containing statically configured
reverse path forwarding (RPF) source address to interface
mappings. This information is currently used in the PIM
sparse… | table | - | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9 |