hmTemperatureTrap
HMPRIV-MGMT-SNMP-MIB ·
.1.3.6.1.4.1.248.14.2.0.1
Object
notification
This trap is sent if the value of hmTemperature leaves or enters the range of the agent temperature threshholds hmTempUprLimit and hmTempLwrLimit.
Context
- MIB
- HMPRIV-MGMT-SNMP-MIB
- OID
.1.3.6.1.4.1.248.14.2.0.1- Type
- notification
- Status
- current
- Parent
- hmAgentEvent
- Siblings
- 18
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hmAddressRelearnDetectTrap This trap is sent if the relearn threshold is exceeded. | notification | - | .1.3.6.1.4.1.248.14.2.0.10 |
| hmDuplexMismatchTrap This trap indicates a possible serious situation.
Check for duplex mismatch, or EMI, or too many cascaded hubs, or exceeded maximum distance at HDX port. | notification | - | .1.3.6.1.4.1.248.14.2.0.11 |
| hmNTPTrap This trap reports NTP error conditions. For a list of
possible error conditions refer to hmNetNTPStatusCode. | notification | - | .1.3.6.1.4.1.248.14.2.0.12 |
| hmPortMonitorPortDisabledTrap This trap is sent if a port has been disabled by port disable action by port monitor. | notification | - | .1.3.6.1.4.1.248.14.2.0.13 |
| hmPOEModulePowerUsageOnNotification This trap reports POE error condition. This Notification
indicate PSE Threshold usage indication is on, the usage power
is above the threshold. At least 500 msec must elapse bet… | notification | - | .1.3.6.1.4.1.248.14.2.0.14 |
| hmPOEModulePowerUsageOffNotification This trap reports POE error condition. This Notification
indicate PSE Threshold usage indication is on, the usage power
is below the threshold. At least 500 msec must elapse bet… | notification | - | .1.3.6.1.4.1.248.14.2.0.15 |
| hmSysSelftestPortError This trap is sent when the agent wants to reboot due to Opal Workaround 4. It shows
that the specific port is in an error state and a device reboot is needed. | notification | - | .1.3.6.1.4.1.248.14.2.0.16 |
| hmMACNotificationTrap This trap is sent when a MAC address has been added to or
removed from the FDB on a specific interface. | notification | - | .1.3.6.1.4.1.248.14.2.0.17 |
| hmPOEPortMaxConfiguredPowerLimitExceeded This trap reports an exceeding of the configured power limit.
This notification indicates that a PD consumes more power that the maximum configured on the port and the system res… | notification | - | .1.3.6.1.4.1.248.14.2.0.18 |
| hmNetMacACDNotification This trap reports a MAC address conflict with it's own MAC address. | notification | - | .1.3.6.1.4.1.248.14.2.0.19 |
| hmLoginTrap This trap is sent if a user attemps to login via telnet
or serial connection. hmLastIpAddr contains the IP address of the
login request. the value is 0.0.0.0, if the request was… | notification | - | .1.3.6.1.4.1.248.14.2.0.2 |
| hmDuplicateStaticAddressTrap This trap is sent if a user attemps to set the same static unicast
address at more than one agent of a chassis | notification | - | .1.3.6.1.4.1.248.14.2.0.3 |
| hmAutoconfigAdapterTrap This trap reports a status change of the Autoconfiguration Adapter. | notification | - | .1.3.6.1.4.1.248.14.2.0.4 |
| hmRelayDuplicateIPTrap This trap reports the detection of a duplicate ip address
by the relay agent. | notification | - | .1.3.6.1.4.1.248.14.2.0.5 |
| hmSNTPTrap This trap reports SNTP error conditions. For a list of
possible error conditions refer to hmNetSNTPOperStatus. | notification | - | .1.3.6.1.4.1.248.14.2.0.6 |
| hmNetACDNotification This trap reports an address conflict detection. | notification | - | .1.3.6.1.4.1.248.14.2.0.7 |
| hmConfigurationSavedTrap This trap is sent after the configuration of the
agent was successfully saved. | notification | - | .1.3.6.1.4.1.248.14.2.0.8 |
| hmConfigurationChangedTrap This trap is sent if the local and the running
configuration doesn't match. | notification | - | .1.3.6.1.4.1.248.14.2.0.9 |